Replacement Pin and Clip for Bulldog Round Tube Adjustable Gooseneck Coupler - Qty 1

Video Transcript for Review of Bulldog Gooseneck Coupler - Replacement Pin and Clip - BD0233060301

Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this replacement pin and clip for your Bulldog round tube adjustable gooseneck coupler. This is for a quantity of one pin. Now, this replaces the pin and the clip on your Bulldog round tube adjustable gooseneck coupler. Basically, this pinning clip is used to secure the outer tube to the inner tube on the coupler. This part will work on most of the Bulldog round tube adjustable gooseneck couplers.

To be sure, if you go to the product page, it will list the part numbers of the couplers that this will work on. You'll notice on the pin itself, it has this nice easy grab handle on the end, makes it easy to install it and remove it. And the clip, what's nice about this, when you remove the clip from the pin, you can see it will stay attached with this lanyard to help avoid or losing the clip. A few specs on this, I wanna measure first the pin diameter. That's gonna be right at 3/4 of an inch diameter.

The overall length, first I'm gonna do the pin, just the pin from this end to this end, you can see 6-1/4 inches. If we extend the handle out with the handle extended all the way out, gets you to about 7-1/4 inches. The usable length, which is measured from under this head here to where the pin installs, let's go ahead and put the pin back in, and once we get that pin in, there we go, so the usable length will be from here to there and you can see usable length is right about 4-3/4 inches. And this is for a quantity of one pin and clip. But that should do it for the review on the replacement pin and clip for the Bulldog round tube adjustable gooseneck coupler.

.