Replacement Rack-and-Post Assembly w/ Steel Wheel for Bulldog Rack-and-Gear Jacks - 21"

$92.20

Retail:$115.84

You Save: 20%

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

bulldog accessories and parts replacement rack-and-post assembly w/ steel wheel for rack-and-gear jacks - 21 inch

bulldog accessories and parts camper jacks trailer jack replacement rack-and-post assembly w/ steel wheel for rack-and-gear - 21 inch

Show All (2) Product Images

Show Fewer Product Images

Customer Photos

Replacement Rack-and-Post Assembly w/ Steel Wheel for Bulldog Rack-and-Gear Jacks - 21" customer photo

Show All (2) Customer Images

Show Fewer Customer Images

Need help with installation?

Locate installers near me

Replaces the rack post with steel caster wheel for your Bulldog rack-and-gear trailer jack. Post measures 21". Zinc plated finish for rust resistance. 1-800-940-8924 to order Bulldog accessories and parts part number BD018006 or order online at etrailer.com. Free expert support on all Bulldog products. Great prices and Fastest Shipping for Replacement Rack-and-Post Assembly w/ Steel Wheel for Bulldog Rack-and-Gear Jacks - 21". Accessories and Parts reviews from real customers.

All Info
Reviews (15)
Q & A (0)
Related Parts
Photos

Bulldog Accessories and Parts

Replaces the rack post with steel caster wheel for your Bulldog rack-and-gear trailer jack. Post measures 21". Zinc plated finish for rust resistance.

Features:

Replaces the rack post with steel caster wheel for your Bulldog rack-and-gear trailer jack
Resists rust with zinc plated finish
Includes painted steel wheel

Specs:

Post length: 21"
Rack length: 18"

Fits:

Bulldog Rack-and-Gear trailer jack with steel wheel: BD161300, BD162300, and BD165311

0180060301 Replacement Rack and Post Assembly w/ Steel Wheel for Bull Dog Rack and Gear Jacks - 21"

Item # BD018006

California residents: click here

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

Wrong item was ordered

2% of customers were not satisfied

Wrong item was ordered

4.9

15 reviews

5 Stars		(13)
4 Stars		(2)
3 Stars		(0)
2 Stars		(0)
1 Star		(0)

by: Lacey C07/27/2012

Fit perfectly..very quick shipping!

by: Jeremy. Breezy s Shaved Ice, Mansfield TX02/28/2024

Bought this for my shaved ice trailer. Shipped quick, perfect fit, and now I can confidently park my trailer. Now to get the rest of the trailer looking as good as this new part. Great price, fast shipping and great overall experience.

Click to Enlarge

by: Daniel06/22/2021

Just finished installing perfect replacement thx

Click to Enlarge

by: Tom W10/18/2017 One Year Later

Perfect replacement for our older boat trailer. Received great help when I called eTrailer, and they quickly figured out which wheel jack to order. Couldn't have been any easier; I should have replaced it years ago when the wheel started getting loose. This is a solid replacement. Fast shipping. etrailer comes through again.

by: Charles 04/12/2020

Great jack post and wheel! Extremely heavy duty. Not like almost all the light weight junk you see nowdays. The way things used to be made. Can't emphasis enough the high quality and heavy duty construction. Not cheap but you pay for what you get.

by: Dan 06/24/2021 One Year Later

Worked and fit perfectly to replace my very worn out jack on my Skeeter boat trailer.

by: William 12/22/2023

Fast ship to

by: Scott03/11/2022

lightning fast service! received days earlier then expected. got what i ordered. i will use this service again

by: Dolores T.01/06/2015

Thank you george for your prompt service. The part you sent was exactly what we needed. Your staff gave me the exact measurement specs. So I was confident the part would work before ordering.
Thank you
Dolores T.

by: Laura03/02/2018

George at the company was a great help.
Product arrived in good condition and a timely manner.

by: Brian 01/09/2025

by: James03/22/2022

Good product. Fast shipping and great customer service

by: Thomas 08/24/2022

by: Keith06/27/2024

by: Eddy 07/01/2021

See what our Experts say about this Bulldog Accessories and Parts

Do you have a question about this Accessories and Part?

Replacement Rack-and-Post Assembly for a Bulldog Rack-and-Gear Trailer Jack
The rack and post assembly that you will want for your Bulldog jack is part # BD018006. This is the replacement rack and post assembly for the Bulldog Rack-and-Gear Bolt On Jack, # BD169201, which is what you have on your trailer. I spoke with my contact at Bulldog and he said the design of the jacks has changed very little since 1997, so it will fit. The rack and post assembly # BD018006, that you referenced would still fit, but has been discontinued. It was designed for the A-frame...
view full answer...
Can Solid Wheel Be Replaced on the Bulldog Rack-and-Post Assembly w/ Steel Wheel
Thanks for reaching out, Bryan! The solid wheel isn't available as a single replacement part so you'll need to replace the entire assembly with the part # BD018006 you were looking at.
view full answer...
What Rack-and-Post Assemblies Are Compatible with the Gearbox and Crank Assembly # BD018161
The Bulldog Weld-On Gearbox and Crank Assembly # BD018161 is compatible with the Bulldog Rack-and-Post Assembly w/ Footplate # BD018520 as well as the Bulldog Rack-and-Post Assembly w/ Steel Wheel # BD018006.
view full answer...
What is the Outer Diameter Of the Bulldog Rack-and-Gear Jack # BD161300
I pulled the Bulldog Rack-and-Post Assembly, # BD018006, and found that the outer diameter of this jack measures slightly wider than 1-1/2 inches at 1.64, or 1-21/32, inches. The gear teeth spacing on this jack is .15, or 5/32, of an inch. Most of the time jacks are not compatible between manufacturers.
view full answer...
Replacement Post and Foot Recommendation for 1987 Bulldog Model 160 Jack
I checked with my contact at Bulldog and you can use the Rack-and-Post Assembly, # BD018520, with a model 160 rack and gear jack. The part # BD018006 is not a confirmed fit so I cannot recommend it.
view full answer...
Light-Duty Weld-On Trailer Jack With Steel Wheel
The Bulldog Trailer Jack BD161300 features a steel wheel # BD018006 and can be used for many applications. This jack has a lift capacity of 750-lbs and has 16-inches of lift. It is a weld-on application.
view full answer...
Recommended Trailer Jack with Wheel for Wood Splitter
For your wood splitter, I recommend using the Bulldog Rack-and-Gear Jack consisting of part # BD018006 and # BD018155 for an A-frame or # BD018161 for a pole tongue . This jack has a steel wheel, works with trailers that have a tongue weight up to 750 lbs, and comes with a weld-on bracket with a primer gray finish. The jack will provide you with 1" of travel for every 4 turns on the handle. I have attached a review video of this jack for you as well.
view full answer...
Parts Needed to Replace a Broken Wheel Assembly on a Bulldog Rack and Gear Jack
I spoke to my contact at Bulldog and he informed me that you would need the Bulldog Rack and Post Assembly part # BD018006. This is the only way to replace the parts you damaged.
view full answer...
Replacement Bulldog Rack and Post Assembly for Damaged Wheel Bracket
Since you bent the bracket of your Bulldog Rack and Post jack part # BD162300 you are going to need the Bulldog Rack-and-Post Assembly # BD018006 as the bracket is not available separately. Most likely you bent the post of the jack as well since the bracket got bent anyway.
view full answer...
Replacement Rack and Post for Bulldog 160 Jack
I checked with my contact at Bulldog and you can use the Rack-and-Post Assembly, # BD018520, with a model 160 rack and gear jack.
view full answer...
Availability of a Replacement Rack and Gear A-Frame Trailer Jack for a Skeeter Boat Trailer
We do have the same jack with either a steel wheel, # BD018006, or with a poly wheel # BD018308. Both have a capacity of 750 pounds and 16 inches of lift. The outer tubing diameter is 2-1/4 inches. The mounting holes are 3 inches apart on center. Compare all of these specs to your existing jack to determine if either listed above will fit.
view full answer...
Can Bulldog Rack and Gear Jack be Mounted so the Handle is More to the Front of the Trailer
Technically, yes, you can position and bolt down Bulldog rack and gear jack # BD018155 with # BD018006 so that the handle winds at the front of the trailer instead of to the side but it may not be the best fit. For what you want to do I recommend the Fulton F2 jack # F1413250334 which has more mounting options and a round bracket for a better fit. To this jack you can add a single wheel # F500266 if you wish.
view full answer...
Replacement Wheel and Crank Assembly Availability for Bulldog Rack and Gear Jack
If you have a Bulldog Rack and Gear jack and need to replace the post assembly so that you have a swiveling wheel the product you need is the part # BD018006. The handles aren't available separately but we do have replacement gearbox and crank assemblies like part # BD019141. But at this point you are essentially buying an entire Rack and Gear jack since those are the two main components so you may as well just get the part # BD165412.
view full answer...
Longest Post Assembly for the Bulldog Weld-On Gearbox and Crank Assembly for Rack-and-Gear Jack
The longest post assembly we offer for the Bulldog Weld-On Gearbox and Crank Assembly for Rack-and-Gear Jack BD018161 is the Bulldog Rack-and-Post Assembly w/ Footplate part # BD018520 which is 23-1/2" long. However, if you need a wheel then the longest post assebly we offer is the Bulldog Rack-and-Post Assembly w/ Steel Wheel part # BD018006 which is 21" long. I am not sure what specs you are looking for but the tube diameter is around 1-5/8".
view full answer...
Trailer Jack Recommendation for a Trailer with a 2 x 1-1/2 Inch Frame
I went out to the warehouse to measure a Bulldog Rack-and-Gear Jack, # BD162300. The smallest trailer frame it could mount to is 1-3/4 inches square so it will not fit on a 2 x 1-1/2 inch frame. I recommend a Bulldog Rack-and-Gear Jack consisting of part # BD018161 and # BD018006 . This jack has an L-shaped mount that will need to be welded to the bottom of the trailer frame. The trailer frame size you have will not matter for this jack. This is the best option I could find for you. It...
view full answer...
What is the Distance Between Gear Teeth on Bulldog Rack and Gear Trailer Jack
I went out to the warehouse to measure the teeth on the Bulldog Rack-and-Post with Steel Wheel, # BD018006. I got a measurement of 0.22 inches center to center between teeth. I used a set of digital dial calipers to take the measurement.
view full answer...
Availability of a Replacement Bulldog Trailer Jack Rack and Gear, Rack and Post Assembly
We do have several rack and post and rack and gear assemblies that are a possible fit. I would need the model number of your jack to find the correct match. I have included a link below to our rack and post assemblies and another link for gearbox and crank assemblies below.
view full answer...
What are the Dimensions of the Mounting Brackets on Bulldog Rack and Gear 750lb Trailer Jack
I went out to the warehouse and pulled Bulldog jack # BD169201 and measured the mounting plate. Its dimensions are 4 inches wide by 4-1/2 inches long. I made a short video that will appear on this page showing the measurements. If this jack will not work for you I recommend something like rack and gear jack # BD018161 along with # BD018006. It will need to be welded to the bottom and outside of the trailer frame. Welding should be done by a qualified professional.
view full answer...
Will the Bulldog Replacement Rack and Post Fit on a Fulton Rack and Post Jack on a 1989 Ranger Trail
I spoke with my contact at Fulton and found that the Fulton rack and gear jacks do not interchange with the Bulldog rack and gear jacks. My contact said that Fulton does not offer a replacement rack and post assembly for their rack and gear jack and that you would need to replace the whole assembly. A good choice for replacement would be the Bulldog Rack-and-Gear Jack with Steel Wheel, item # BD018155 and # BD018006. Both of these options have a 750 lb capacity and install in the a frame...
view full answer...
Replacement Rack and Gear Post with Caster Recommendation for A-Frame Bulldog Jack
Does it look like the part # BD018155? This is an A-frame style of rack and gear jack that you most likely have. If so, the part # BD018006 will work as a replacement but it is 3 inches shorter than the original.
view full answer...
Rack And Gear Needed For The Rack-and-Post Assembly For Bulldog Rack-and-Gear Jacks # BD018006
Hey Jack, The rack and gear for the Rack-and-Post Assembly w/ Steel Wheel for Bulldog Rack-and-Gear Jacks # BD018006 (0180060301) you have is listed under part number BD162300, but it's unfortunately no longer available. You could try reaching out to Bulldog directly to see if they might still have some in stock, otherwise you'd need to switch to an entirely new jack for your trailer.
view full answer...
Comparing Rack and Gear Trailer Jacks with Regular Jacks
If you are looking at a rack and post such as # BD018006 it is just a replacement for the post in a rack and gear jack. A rack and gear jack such as # BD018161 works along with # BD018006. This one gets welded to the frame. Jack # BD169201 clamps to the frame, and one like # BD165411 bolts in as an A-Frame jack. Unlike a typical jack that has a fixed nut inside and a screw that turns in it to raise/lower the inner leg, rack and gear jacks have the gear track fixed to the post and the...
view full answer...
Outer Tubing Diameter Including the Teeth for Bulldog Rack-and-Gear Trailer Jack
I went out to the warehouse and measured the rack and post assembly on Bulldog Rack-and-Gear Jack, # BD018006. The tube diameter by itself measures 1.624 inches. When you add in the teeth that are on the side of the leg, it is 1-15/16 inches so it will fit in the 2 inch diameter hole on your a-frame trailer.
view full answer...
Diameter of Bulldog Rack-and-Post Assembly w/ Steel Wheel # BD018006
The post on the Bulldog Rack-and-Post Assembly w/ Steel Wheel, part # BD018006 measures 1.625 or 1-5/8 inches in diameter.
view full answer...

< Previous

Next >

Do you have a question about this Accessories and Part?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

John H

Written by:

Lindsey S

Updated by:

Laura H

Updated by:

Alexander C

Edited by:

Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.