Single Air Pressure Gauge for Bulldog Winch On-Board Air Tank - 200 psi

Video Transcript for All About the Single Air Pressure Gauge for Bulldog Winch On-Board Air Tank

Jeff Hello every buddy, this is Jeff at etrailer.com. Today, we'll take a look at the single 200 PSI Air Pressure Gauge for your Bulldog Winch On-board air tank. You can see this has a nice single needle, in cab gauge, and let your monitor the pressure on your On-board Bulldog Winch air tank. And it is an analog mechanical gauge, and it is lighted around the perimeter of the dial for viewing it night. You can see in the very back here, you got your wire connected to your bulb right up at the top here, slide your little bulb out there. And at the very bottom here, you can see the airline connection goes right here.

Now this does include this connection kit which will include 12 feet of nylon air hose, five different brass fittings for connecting your gauge. And if you notice on the back, it over to I already have the mounting bracket attached to it, you can see here's your mounting hardware, just loosen that then tighten it down to hold it into place. It is made of a zinc coated steel, which is very durable and corrosion resistant, maximum air pressure, this will go up to is 200 PSI. Last thing is get a few dimensions on this. The diameter's about two inches, and the depth on it is right at about three inches deep.

But that should do it for the review on this single 200 PSI Air Pressure Gauge for the Bulldog Winch On-board air tank..