This small cable stopper for your recovery winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Simply feed rope through center hole and attach hook.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the Bulldog Winch Cable Hook Stopper for Recovery Winches. This is going to be made of a polyurethane material and it comes in blue.Now this is a great product to help prevent a couple of things that are common with our recovery winches. One is that as that hook pulls back into our winch it can kind of tear up the fair lead on that winch, and it can also tend to pull to far into the winch, especially if that hook comes off. So this is going to be in place behind our hook and in front of that fair lead to prevent those problems. It's also going to prevent the rope hook from hitting against that fair lead. So as you're going down the road it's going to prevent any damage to it so it doesn't get all scratched up.
And again, it's also going to prevent that cable from being pulled in to far. This has a nice large size, which makes it perfect for recovery winches. It's going to be compatible with wire and synthetic ropes.It's very easy to install. You're just going to slide that rope through the slot in the front and then attach your hook on the other side. It's made of that nice polyurethane construction.
So it's gonna have a little bit of give and protection, there again, to make sure that that hook isn't going to rattle around as you're going down the road. It's also going to prevent any scratching on the back since it's that nice, kind of, soft rubbery material.This is also going to resist crumbling and decay. So you don't have to worry about this falling apart after a season like you might expect with a rubber hook stopper.As far as the dimensions, this is going to be about two and three quarters an inch in diameter, and it's going to be about one and three quarters of an inch thick. The opening that goes all the way through is going to be about an inch and three quarters wide. That circular part is going to be just about three quarters of an inch thick as well.Bulldog Winch also stands behind their product by offering a limited lifetime warranty for this cable hook stopper.That's gonna do it for our look at the Bulldog Winch Cable Hook Stopper for Recover Winches..
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
This small cable stopper for your recovery winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Simply feed rope through center hole and attach hook.Good fit
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.