Video Transcript for Review of Bulldog Winch Winch Power Unit 450A Contactor - BDW20290

Hi everybody. Steven here with etrailer.com. Let's take a look at our Bulldog Winch Power Unit. It's a 450 amp contactor for your standard series winches. Now folks, this replaces the OE Power Unit on those Bulldog Winch, the standard series winches. It is a complete power unit.

It includes the sealed connector, our contactor, the housing here, the plug, all the brackets, screws, and all the wiring. Now this does work in hand with a Bulldog Winch hand controller that's sold separately here at etrailer.com. They give you an impressive 6' battery positive cable lead. It is already marked in red. And all the other cables here, they're about a foot and a half long, 18 inches, give or take a little bit and just kind of depends on how you get 'em stretched out.

But about a foot and a half long. Very impressed with it. Nice, robust, heavy-duty. It is made again by a Bulldog, a direct replacement, so you can be sure it works with those standard series winches. Now that being said, let's go ahead and get some quick dimensions on the unit itself.

I got about, oh, I'd say six. Flip it over here, maybe we can get a little better view here. Side to side, about 6 inches inches wide. And as far as a depth on the back, eh, about 4 inches on just this flat part here. And then on a height, not counting the feet, it's right about 3 inches tall.

So again, folks, that is our look at the Bulldog Winch Power Unit. So again, folks, you're gonna get everything you need here and that you see here, and you will need to use that Bulldog Winch hand controller, sold separately if you don't already have one. I'm Steven, thanks for watching.