bing tracking image
  1. Accessories and Parts
  2. Bulldog Winch
  3. Electric Winch
  4. Pulleys and Snatch Blocks
  5. Snatch Block
Bulldog Winch Snatch Block - Silver Zinc Coated

Bulldog Winch Snatch Block - Silver Zinc Coated

Item # BDW20023
Our Price: $32.54
You Save: 44%
Accessories and Parts
Shipping Weight: 2 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
1-800-940-8924 to order Bulldog Winch accessories and parts part number BDW20023 or order online at Free expert support on all Bulldog Winch products. Great prices and Fastest Shipping for Bulldog Winch Snatch Block - Silver Zinc Coated. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Videos (2)
  • Photos

Bulldog Winch Accessories and Parts - BDW20023

  • Electric Winch
  • Pulleys and Snatch Blocks
  • Snatch Block
  • Bulldog Winch

  • Silver zinc plated snatch block resists rust and corrosion
  • Quick opening side plates for easy rope installation
  • 3.2K WLL (working load limit)
  • Maximum rope diameter: 5/16"

20023 Bulldog Winch Snatch Block - Silver Zinc Coated

California residents: click here

Video of Bulldog Winch Snatch Block - Silver Zinc Coated

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Bulldog Winch Electric Winch BDW20023 Review

Today we're going to review part number BDW20023. This is the Bulldog Snatch Block for use with the Bulldog Powersport Winches. This snatch block is used with the Bulldog ATV and UTV Powersport Winches. This will increase your winches' pulling power by adding in additional anchor point to run your wire rope through. It will also change the direction of our pull without damaging the wire rope. As you can see, it has the quick-opening side plates for easy rope installation.

It has a nice silver zinc-plated finish to help resist rust and corrosion. Now, the breaking strength capacity on this is 8,000 pounds. Working load limit is 3,200 pounds, and it uses a maximum wire rope diameter of five-sixteenths of an inch. Basically, when you use this as another anchor point, what's nice about it is you don't have to try threading your wire rope through here. You just open up both side plates, hook your rope right through here, close it, attach it to your anchor point, and you're ready to go.

Very easy installation. That should do it for the review on part number BDW20023, the Bulldog Snatch Block for use with the Bulldog Powersport Winches. .

Customer Reviews

Bulldog Winch Snatch Block - Silver Zinc Coated - BDW20023

Average Customer Rating:  5.0 out of 5 stars   (6 Customer Reviews)


Looks like a top-notch product. I'll be using it to redirect a handwinch cable down the center of a ramp, to pull a dolly up or lower it. The easy way it comes apart--so one can quickly thread the cable through--speeds the process of setting it up.


I'm always pleased with the staff at etrailer and Jeri followed through with flying colors . She's kind and very polite . I look forward to Jeri handling my future purchase's .

Best regards,
L.E. Zoman


Works good.



Been working great.


This product was more than I expected. Great service etrailer. Again. RHM




See what our Experts say about this Bulldog Winch Accessories and Parts

  • Pulley Block Recommendation for Trailer
    We have pulley blocks like the # BDW20023 that could be used in your application but you'd have to come up with a way to mount them since we don't have setup designed for your application.
    view full answer...
  • How to Determine Correct Winch Capacity for Boat Trailer
    The general rule for winch capacity relative to boat weight is that if wooden bunks are used the winch should be rated for at least half the boat weight, a 2:1 ratio. If roller bunks like # DL21741 are installed on the trailer this dramatically reduces the winch's work load and a winch rated for 1/3 of the boat weight would usually be sufficient, a 3:1 ratio. The incline angle when winching also affects capacity. Just the same, any product like a winch or jack that is used well below its...
    view full answer...
  • Compatibility of Winch Mounted to Class I Hitch Receiver and Decline Slope
    I'm with you on your calculations although I'm not a trig expert. The issue is there is nothing that has been tested with a winch on a class I hitch. The Bulldog Winch Hitch Mounted Winch Mounting Plate # BDW20011 is only a fit on 2 inch hitch receivers and there isn't a mount for the smaller 1-1/4 inch receiver. So, then you would need to use a hitch expander like # HTAD that would reduce the tongue weight rating of your hitch by 50% and add more weight as well. So the adapter at 7...
    view full answer...
  • Electric Winch for Car Hauler Trailer Carrying 2600-lb Military Jeep
    Please refer to the linked article on powered winches and to the linked page to view electric winches suited for use on a car hauler trailer. For a cost-effective option consider the Bulldog # BDW15017, rated for 3400-lbs. This has enough capacity for your rolling load, includes a 45-foot wire rope, mounting plate, roller fairlead and wired remote control. If you want to take some strain off the winch's 1.5-horsepower motor you can add a pulley block # BDW20023. This will increase the...
    view full answer...
  • Hand Winch Recommendation for a 5,500 Pound Capacity Single Car Hauler Trailer
    You can ask as many questions as you want, no problem! So, first, yes, you can use a pulley block to double the capacity of a winch at half the speed so you will not have to worry about that. With a rolling load though you may not have to. A rolling load, using a 2500 pound winch up as steep a grade as 45 degrees the winch capacity is 3,225 pounds at the first layer or so of wire rope on the drum. At a 26 degree incline you are looking at a capacity of 4,650 pounds. I have included a...
    view full answer...
  • Mounting a Winch in a Boat House to Pull a Boat Up a Launch Ramp
    I am assuming the boat is on a trailer when stored in the boat house which will make things a lot easier. So basically what you could do is use a winch that can pull/lower the trailer and boat up and down the ramp. To load the boat on the trailer you would need to mount a winch to the trailer. For a winch to mount in the boat house you could just go with a hand winch such as # F143201, which has an automatic brake, with cable # DL24100. If the boat house has AC power then you could use...
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Lisa S
Written by:
Lisa S
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.