Heavy duty construction enables your to keep your bikes on their rack when the rack is not in use. Keep hitch accessories easily accessible while organizing your garage or basement. Call 800-298-8924 to order Boone Outdoor Accessories and Parts part number BH92422 or order online at etrailer.com. Free expert support on all Boone Outdoor products. Guaranteed Lowest Price and Fastest Shipping for Boone Docking Station Bike Rack Storage - Stand for 2" Hitch Accessories. Accessories and Parts reviews from real customers.
$64.95

Select Your Vehicle
Select Your Vehicle

Boone Docking Station Bike Rack Storage - Stand for 2" Hitch Accessories


1 review 
 

Shipping Weight: 13.65 pounds

Retail:$72.99

Price:$64.95


Accessories and Parts > Hitch Bike Racks > Accessories > Storage > Bike Rack Storage > Floor Mounted > 2 In Hitch Racks > 4 Accessory Capacity > Boone Outdoor


Boone Docking Station Bike Rack Storage - Stand for 2" Hitch Accessories

Boone Outdoor Accessories and Parts

(1 reviews)


Code:   BH92422

Retail:$72.99

Price:$64.95


Shipping Special

Shipping Weight: 13.65 pounds

Quantity: 






Boone Outdoor Accessories and Parts - BH92422

Heavy duty construction enables your to keep your bikes on their rack when the rack is not in use. Keep hitch accessories easily accessible while organizing your garage or basement.

Boone Outdoor Hardware Boone Docking Station Hitch Accessory Storage Stand

An ingenious storage solution for your trailer hitch gear, from bike racks, cargo carriers and tables, to spare drawbars and ball mounts. Use the Boone Dock to store and organize your trailer hitch accessories.

How it works... The Boone dock is composed of an upright bar with a foot at the bottom and an arm at the top. The foot carries the weight of the racks being stored on it, while the arm is attached to wall studs to help stabilize the Boone Dock. The upright bar has a "Dock Block" used to hold the hitch accessory. The Dock Block is made up a Cross Pin and Support Bar. The hitch pin hole of the hitch accessory is slid over the Dock Block's Cross Pin while the bottom of the shank rests on the Support Bar. Each Dock Block can be accessed from either side and therefore can store 2 hitch accessories, such as a bike rack and a cargo carrier. Cross Pins of different sizes can be switched out or additional Dock Blocks can be purchased to allow for even more storage.

Features:
  • Heavy duty carbon steel construction
  • Allows you to store bikes on your bike rack when not in use
  • Use your cargo carrier as a shelf in the garage
  • Perfect for organizing your garage or basement
  • Side load design makes hanging up your hitch gear quick and easy
  • Boone Dock pin height can be adjusted among 6 locations
  • Built-in brackets allows for the storage of cargo straps
Specs:
  • Designed for hitch accessories (bike racks, cargo carriers, ball mounts) that slide into 2" x 2" trailer hitches
    • Thule and Yakima bike racks that fit only 2" will require a special pin (# BH83747) to accommodate their built-in anti-rattle devices
      • An Additional Dock Block (# BH9580S) can also be purchased to work with these racks and double the storage capacity
    • Saris, Thule and Yakima bike racks that fit both 1-1/4" and 2" hitches will require a special pin (# BH8375FS)
    • Will not work with Sportrack bike racks
  • Can hold 4 hitch accessories
    • Note: Hitch accessory sizes and shapes can limit the number of those stored on a Boone Dock at one time
  • Additional Dock Blocks (Cross Pin and Support Bar) are available for even more storage.
  • Weight Capacity: 300 lbs
    • 150 lbs. per Dock Block




Video of Boone Docking Station Bike Rack Storage - Stand for 2" Hitch Accessories


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.



Video Transcript for Boone Docking Station for 2 Inch Hitch Accessories Review

OK, we are going to show you a Boone Docking Station from Boone Outdoor Hardware, it is their part number 92422. What this unit allows you to do is your hitch rack and gear storage center. Basically you can hang anything that you tow behind your vehicle, with it. It could be a ball mount, a cargo carrier, or bicycle rack or anything between. You can go ahead and store it on your rack right here, out of the way but yet easy to reach. What the unit comes standard with is two what is called dock blocks. Basically, these pins hold this bar into place and it actually holds your hitch gear where you want it. You can mount it here, here or here, and there are 3 slots on the bottom too. We will go ahead and show you how the assembly works to hold your gear.

For instance, you can start off with a ball mount assembly. It simply slides on and rests on this bar and it will not go anywhere. Plus it has a clip for safety so it does not bounce off. We will go ahead and install a typical bicycle rack, and that way you have it held up out of the way also.

One thing that is definite that you have to do about this rack is this rack does get bolted to your wall. We do not have it, obviously, bolted here, for demonstration purposes, but it does come with 4 black screws right here. Plus, it comes with 4 mounting holes, already predrilled. The mounting holes on the inside are 16 inches on centers to match the common studs in a garage.

As you can see, we showed all 2 inch accessories on this rack. However, you can also use 1-1/4 inch accessories on this rack also. You just have to add a separate dock block for that specific application. There are applications for 1-1/4 inch and also bicycle racks or other devices that have threaded inserts also. And there you have it for a Boone Docking Station, part number 92422.




Customer Reviews

Boone Docking Station Bike Rack Storage - Stand for 2" Hitch Accessories - BH92422

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Heavy duty construction enables your to keep your bikes on their rack when the rack is not in use. Keep hitch accessories easily accessible while organizing your garage or basement.


- BH92422

by: Tony C.10/23/2012


Well constructed and easy installation. It saved my lots of space in the garage and keeps all my hitch related equipment (multipurpose ball mount, scooter/cargo carrier, bike platform carrier, tie down straps, etc.) organized. 57909




1
1


Ask the Experts about this Boone Outdoor Accessories and Parts
Do you have a question about this Accessories and Parts?


  • Storage Rack for Yakima HoldUp 4-Bike Hitch-Mount Rack # Y02443-2
  • The Boone Docking Station Bike Rack Storage Stand # BH92422 that you referenced has a weight capacity of 150-lbs per each of its two included dock blocks. More dock blocks, part # BH9580S, can be added. For use with your Yakima HoldUp rack you will also need a special pin to accommodate their built-in anti-rattle devices, part # BH83747. The Swagman X Mount Bike Carrier Storage Rack # S80940 offers a 100-lb capacity, so in order to have some safety margin (always a good idea) I suggest...
    view full answer...

  • Can Boone Docking Station Bike Rack Storage Stand for 2" Hitch Accessories Hold Kuat N101 Bike Rack
  • The Boone Docking Station Bike Rack Storage Stand for 2 inch Hitch Accessories, part # BH92422, is a wall mount rack that can hold and store a number of hitch-mounted accessories such as your Kuat bike rack. No special parts are required for your Kuat bike rack to mount on the Boone stand. (Certain models from other brands of bike racks - such as Saris, Thule and Yakima - require a special accessory pin for proper mounting; racks from Sportrack cannot be used with the Boone Storage...
    view full answer...

  • Bike rack Storage for a Yakima SwingDaddy Trailer Hitch Mount Bike Rack
  • Since the Yakima SwingDaddy, # Y02422, only fits 2 inch trailer hitches but uses a 1/2 inch threaded bolt to mount to a hitch receiver. The Hang2 # BH90H3FS you referenced is designed for racks that will fit both 1-1/4 and 2 inch trailer hitches but uses a 1/2 inch pin. The issue is the weight capacity. The Hang2 has a capacity of 45 pounds per side so you would be slightly over that and because of this I do not advise using this unit. What I recommend is the Docking Station, # BH92422,...
    view full answer...

  • What is the Weight Capacity of Swagman X Mount Bike Carrier Storage # S80940
  • The capacity for Swagman X Mount Bike Carrier Storage # S80940 is 100 pounds and the surface that it mounts to needs to be rated for more than 100 pounds in order for you to be able to put 100 pounds on the rack. The steel is about 1/8 inch thick. Boone Docking Station # BH92422 is rated for 300 pounds total or 150 pounds per dock block. So if 100 pounds is not enough and 150 is then the Docking Station is the way to go.
    view full answer...

  • Boone Docking Station Dimensions Length
  • I went and pulled a Boone Docking Station Bike Rack Storage Stand from our warehouse, put it together and found that it is 49 inches tall when fully assembled. I attached a review video for this product for you to check out also.
    view full answer...

  • Can the Boone Hang2 Be Used to Store Bikes While They are Attached to the Rack
  • Having the bike racks unfolded and holding bikes while using the Boone Hang2 most likely would not work well for you. The weight itself would not necessarily be the problem, but the torque and leverage applied to the wall mounted bracket would most likely tear the bracket out of the wall. The Hang2 is designed to hold the rack for storage, but was not meant to be used while the bikes are attached to the rack. An item like the Boone Docking Station, part # BH92422 would be a much better...
    view full answer...

  • Boone Docking Storage System Recommendations for Storing 10 2 in BallMounts and 2 1-1/4 BallMounts
  • I think your best solution would be to get a Boone Dock 1-1/4 inch Accessories part # BH94112 for your two 1-1/4 inch ball mounts. This comes as-is with everything needed to store two 1-1/4 inch hitch accessories. And then to store your 8 to 10 2 inch ball mounts you would want the Boone Docking Station Bike Rack Storage Stand for 2 inch accessories part # BH92422. This comes with everything needed to store 4 of your ball mounts, but for every two ball mounts you need to store you would...
    view full answer...


Do you have a question about this Accessories and Parts?



Info for this part was:


Expert Research:
Adam R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com