Replacement Pigtail - 3 Wire Sealed for LED Tail Light

See what our Experts say about this Bargman Accessories and Parts

• Does Wesbar Waterproof Left Hand Low Profile Tail Light Come With a 3-Wire Pigtail
  The Wesbar Left Hand Waterproof Low Profile Tail Light # 271585 that you mentioned does not come with a pigtail for hook up. The pigtail that fits is the 3-wire pigtail # 40-00-003. The right hand low profile tail light is part # 274584 and it does not come with a pigtail either. The Wesbar Left Hand Waterproof Low Profile Tail Light that comes with a pigtail is # 271585-01 and the right hand tail light is # 274584-01. These lights use pigtails that are specific to Wesbar LED lights,...
  view full answer...
• Will Bargman Lights Fit on Rounded Corners of Boat Trailer
  Thanks for the photo of your trailer! Based on the photo you sent in, it looks like the Bargman LED Trailer Tail Light # 47-06-404 that you referenced will work well for you. This light measures 6-1/2 inches long x 2-1/4 inches tall and is designed to mount in a grommet, # 40-06-020. As long as these measurements are comparable with your existing light, the Bargman light will work well as a replacement. The light connects to the trailer wiring via an industry standard 3-prong plug, #...
  view full answer...
  
• Which Oval LED Trailer Tail Light is Brightest?
  It is difficult to compare the brightness on the different LED oval tail lights. Neither Bargman nor Optronics share lumen ratings for their tail lights. So, when comparing the Bargman 48 Diode Tail Light # 47-06-404 with the Optronics 22 Diode # STL111RB, or the Optronics 10 Diode # STL72RB, you won't notice a huge difference with the naked eye. But, in most cases, the more diodes there are in an LED light, the brighter it will be. This is not always the case, but all LED tail lights...
  view full answer...
• 6x4 Inch LED Trailer Tail Lights that Mount on Studs on 2 Inch Centers for Shorelander Boat Trailer
  We have Wesbar lights # 271585 for the left and # 271584 for the right. They are 6 by 4 inches, LED, waterproof, mount on studs on 2 inch centers, and you would need pigtail # 40-00-003 (one for each light). LED tail light # STL56RB for the right hand side and # STL57RB for the left are a close match. They are 6-1/16 inches across and 3-5/8 inches tall. They mount on studs on 2 inch centers. The lights are submersible and the LED board sealed to keep out water.
  view full answer...
• Is the Bargman LED Trailer Tail Light a Quantity of One or Two Lights
  The Bargman LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 48 Diodes # 47-06-404 is a quantity of one light. It's large number of diodes makes this one of the best trailer lights on the market. It is recessed mount with Grommet # 40-06-020 and wires in with Pigtail # 40-00-003 or # 40-00-004. Additionally, there are more budget-friendly options that are a similar size than the Bargman. For example, I recommend checking out the Optronics LED Trailer Tail light - Stop, Tail, Turn...
  view full answer...
• Hitch-Mounted Cargo Carrier With Complete Trailer Light Kit And Wiring
  The 24x62 etrailer Cargo Carrier e98872 is an excellent option for a folding cargo carrier and has a 500lb weight capacity. Bargman LED Trailer Tail Light - Stop, Tail, Turn # 47-06-404, Rubber Grommet # 40-06-020, and Trailer Light Mounting Bracket # BK70BB will all work well together. For the wiring you will need Replacement Pigtail - 3 Wire Sealed # 40-00-003 which will plug into the tail lights and then you will need 20 Ft 4-Way Trailer Wiring Harness # A20WB to connect the tail light...
  view full answer...
  

Do you have a question about this Accessories and Part?