BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers

BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers

Item # BAK92120

lowest price pledge

Retail:$332.22

Our Price: $299.00

You Save: $33.22
Accessories and Parts

This item qualifies for Free Shipping

Shipping Weight: 20 lbs

Quantity: 
BAK Industries Tonneau Covers - BAK92120
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • Tonneau Covers
  • Toolbox
  • BAK Industries
10" Wide x 10" deep cargo box works with your BAX Revolver X2, BAK Roll-X, or BAKFlip tonneau cover (sold separately) to create a custom toolbox for organizing and securing your gear. Rugged polymer box folds up for full truck bed access. Call 800-298-8924 to order BAK Industries accessories and parts part number BAK92120 or order online at etrailer.com. Free expert support on all BAK Industries products. Guaranteed Lowest Price and Fastest Shipping for BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (1)
  • Q & A (8)
  • Videos (1)
  • Photos
  • Why etrailer?

BAK Industries Accessories and Parts - BAK92120

10" Wide x 10" deep cargo box works with your BAX Revolver X2, BAK Roll-X, or BAKFlip tonneau cover (sold separately) to create a custom toolbox for organizing and securing your gear. Rugged polymer box folds up for full truck bed access.


Features:

  • Cargo box works with your BAK Revolver X2, BAK Roll-X, or BAKFlip tonneau cover (sold separately) to create a custom toolbox for your truck bed
    • Toolbox is out of sight and contents are protected when tonneau is closed and tailgate is locked
  • Collapsible box can be folded up for full use of your truck bed
    • Can also be turned into a shelf by folding the front panel into the bottom of the box
  • Sliding tray lets you store small items
  • Sturdy construction is corrosion and UV resistant
    • 1/2" Thick, fiberglass-reinforced polymer panels have black paint finish with hair cell texture
    • Aircraft-grade, rustproof aluminum end plates and panel frames have black powder coat finish
  • Easy, no-drill installation
    • Clamps onto tonneau frame rails with included hardware
  • Made in the USA


Specs:

  • Dimensions: approximately 60" long x 10" wide x 10" deep
  • Weight capacity: 400 lbs
  • 1-Year warranty


Keep your truck bed organized and your tools secure with the BAKBox 2. This custom cargo box is designed to work with your BAK Revolver X2, BAK Roll-X, or BAKFlip tonneau cover (sold separately) to create a convenient, secure storage solution for your vehicle. The BAKBox 2 installs just beneath your truck bed side rails. When your tonneau is closed and your tailgate is locked, the box is out of sight and its contents are completely secure.


BAKBox 2 Collapsible Design

The BAKBox 2 features a collapsible design so that you can still use your entire truck bed to haul large cargo. Just empty the box, undo the Velcro strips that hold the front panel in place, fold the front panel on top of the bottom panel, and then fold both of those panels flat against the back panel of the box. You can also leave the panels in the first folded position to form a convenient shelf.


The BAKBox 2 is strong enough to hold up to 400 lbs of evenly distributed weight. The 1/2" thick, insulated, fiberglass-reinforced polymer construction features a painted, hair cell texture finish. Each panel is designed to resist dents, dings, and harsh UV rays. And the sturdy, aircraft-grade, rustproof aluminum end plates and panel frames have a sleek black powder coat finish to match the frame rails of your BAK tonneau cover.


Easy, No-Drill Installation

BAKBox 2 Installation

The BAKBox 2 installs on the frame rails of your BAK Revolver X2, BAK Roll-X, or BAKFlip tonneau cover. The toolbox's end plates are designed to hang from the tonneau rails. The included brackets clamp around the frame rails and attach to the end plates for secure mounting. The toolbox hangs just below your truck bed rails so that it won't interfere with the fit of your tonneau cover.



92120 BAK Industries Back Box Two Tool Box for BAK Revolver X2, BAK RollX, or Back Flip Truck Bed Covers






California residents: click here


Video of BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for BAK BAKBox Collapsible Truck Bed Toolbox Installation - 2015 GMC Sierra 3500

Today on our 2015 GMC Sierra 3500 HD we'll be taking a look at and installing the BAKBox 2 Collapsible Truck Bed Toolbox for BAKFlip Tonneau Covers, part number BAK92120. The BAKBox Collapsible Truck Bed Toolbox is the perfect way to secure your gear and keep your tools organized under your tonneau cover. With the easy no-drill installation and the hardware included, it's designed to fit within your tonneau frame reels so it's going to fit the BAKFlip, the Roll-X, and the Revolver-X 2 Tonneau Covers. The sliding tray can be used to store small items and if we'd like, the front panel folds down to act as a shelf. Or if we need the use for the full truck bed, we can fold the front panel over the back and then we've got the room. It's 60 inches long by 10 inches wide by 10 inches deep. It has a 400 pound weight capacity.

It's constructed of a half-inch thick fiber glass reinforced polymer, so it's going to be UV resistant and corrosion resistant. When you don't need to access your tools, they're out of sight and protected with the tonneau cover is closed and your tailgate's locked. Now that we've gone over some features I'll go ahead and show you how to get it installed. Let's roll back our tonneau cover to give us some room to work. We just want to make sure and roll it all the way up or fold it up, whichever BAKFlip tonneau cover you're working with. To get started, a few things we're going to need here is the large plate that you see here, two 2-inch bolts, the clamping plate (the one that corresponds with whatever tonneau cover you're working with; we're working with the Revolver today so we're going to use the one that says C), the two u-nuts, and a Phillips screwdriver.

We'll take our large bracket and our clamping bracket. We're going to make sure that the holes you see there are in this position here. We're going to take our u-nuts, we're going to clip them on the sides like that. Want to make sure that the pointed end of the u-nut is facing that way as you see there. Then we'll turn it around.

We'll take our 2-inch bolt. We're just going to run it through like this and get that loosely installed. Put our other one in here. Now according to our instructions, the clamping bracket goes toward the end here and this is the portion that's going to go towards our cap. So you need to have it closer to the tailgate, as you see here.

Now everything we do here, we're just going to repeat that same process on the other side. All right. We've got our left and right side ready to go and assembled the way they should. They're just going to go up in the bed like this. Let's go ahead and head up there. Now with our clamp loosely installed on our large plate, we're going to go ahead and set it into position. These tabs on top of the large plate, we're going to slide into the groove right here until it kind of fits right into position. That way we can slide it all up and down that little track inside there. There's another track kind of in there but the main one's going to be above it, that way you can easily slide it like that. It's just going to kind of hang there. Now if you're working with the Revolver tonneau cover, as we are here today, it's recommended that you run your strap that holds the tonneau cover through the center. That way you can get your utility box slid all the way forward as much as it will go. Now you don't have to but that's the way we're going to do ours here today. With that in position, let's go ahead and tighten it down with our Phillips screwdriver. What we want to do is tighten them both down evenly, that way we can ensure a nice, snug fit. Now with that in place, let's go ahead and tighten up our screws a little bit. We don't want to tighten them all the way just yet because we may need to adjust it a little bit. We'll just get them snug for now and repeat that same process for the other side. Now let's go ahead and set our three panels in position. We need to make sure that our hook and loop fastener is facing toward the tailgate as you see here. I'm going to come down to my large plates and then I'm going to start unfolding the panels a little bit as I guide them down in. Now it's a good thing to go ahead and place it in evenly, that way it doesn't get cocked. Then once we get into position, we can fold it out the rest of the way. Now in setting the panels in place, it can be kind of flimsy because they're loosely installed. Let's go ahead, fold it up, and clip on the hook and loop fastener on both sides. Then we'll finish folding out the third panel. To help hold that up, I found it was easiest just to go ahead and place in the tray, just to kind of hold everything open a little bit. Just like that. Now let's go ahead and finish installing our hardware. On the inside of our utility box, we've got four pre-drilled holes on both sides. We've got two on top and then two on bottom. What we need to do is we'll take our 1-inch screw and our nut, and we're going to put that through here on the inside and it's going to go through the slot of our large plate, and we can put the nut on back. Now we're going to do that for the other three. Let's go ahead and repeat that same process on the other side. Now with all eight bolts in place on the inner portion of our panel, we can go ahead and tighten them down. Now to tighten these ones down with the nut on the backside you're going to need a 9 millimeter wrench. We'll put the wrench on the back side, we'll take our Phillips screwdriver, and tighten it down. Now we can adjust or fine tune our large plate here on the side, just to make sure it fits the panels evenly. That looks pretty good. Get those nice and snug and then we'll repeat that same process on the other side. Now with the panels tightened down to our plates, we can make any adjustments we may need in the utility box itself. Once we've got it in position, we can finish tightening our two bolts on the sides. That's going to prevent it from sliding up and down on our track. That's going to complete our look and install of the BAKBox 2 Collapsible Truck Bed Tool Box on our 2015 GMC Sierra 3500 HD, part number BAK92120.


Customer Reviews

BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers - BAK92120

Average Customer Rating:  4.0 out of 5 stars   (1 Customer Reviews)

10" Wide x 10" deep cargo box works with your BAX Revolver X2, BAK Roll-X, or BAKFlip tonneau cover (sold separately) to create a custom toolbox for organizing and securing your gear. Rugged polymer box folds up for full truck bed access.

- BAK92321
by:

Review from a similar BAK Industries BAKBox 2 in Accessories and Parts


Cool little box. Easy to install. Fits nicely under the Tonneau cover. Pretty sturdy. 567291


1
1

Ask the Experts about this BAK Industries Accessories and Parts
Do you have a question about this Accessories and Part?


  • Does BAKBox 2 Collapsible Toolbox Fit BAK Revolver X4 Tonneau
  • Since the only difference between a Bak Revolver X2 and an X4 is the finish of the paint the BAKBox 2 Collapsible Truck Bed Toolbox # BAK92120 will work with a X4 like the part # BAK79122 that you referenced. This is a matte finish cover whereas the X2 is gloss.
    view full answer...

  • Comparing OEM Tonneau Cover REV for 2017 Chevy Silverado Crew Cab Short Box to BAK Revolver X2
  • I did some research and reached out to my contact at BAK to get some information. They confirmed the REV brand is a private label of basically the same products in the BAK tonneau cover line of products. They have both a GM and a Ford line that is private labeled so the vehicle manufacturer can have their OEM option. For your 2017 Chevy Silverado 1500 Crew Cab with the 5' 8" bed, the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl # BAK39120 is the correct fit and...
    view full answer...

  • BakBox Compatibility with OEM REV Tonneau on 2018 Ford F-150
  • The BAKBox 2 Collapsible Truck Bed Toolbox for BAK Roll-X and BAKFlip Tonneau Covers # BAK92321 has not been tested for compatibility with the REV brand tonneau. The BAK rails have a specific channel for that box to fit which you can see in the attached photos. If your rails have a similar rail it may fit or you may be able to make a customized mounting to work. The BakBox is approximately 60" long x 10" wide x 10" deep and has a weight capacity of 400 lbs. The # BAK92120 you...
    view full answer...

  • Recommended TracRac SR Truck Bed Ladder Rack for a 2017 GMC Sierra 1500
  • I do have a sliding ladder rack confirmed to fit your 2017 GMC Sierra 1500 but according to the manufacturer, the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension part # TH43002XT-501EX will not work as it is only designed to work with a GMC Sierra 1500 from 1999-2013. For a sliding ladder rack that is confirmed to fit your vehicle, I recommend using the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension part # TH43002XT-782EX for the 5-1/2' bed and...
    view full answer...

  • Truck Bed Toolbox to Fit with BAKFlip MX4 Tonneau Cover on 2018 Sierra 1500 with 6-1/2 Foot Bed
  • Actually we do carry a toolbox specifically designed to fit the BAKFlip MX4 tonneau cover, part # BAK48121, on your 2018 GMC Sierra 1500 with the 6-1/2 foot bed. It's the BAKBox, part # BAK92120. It can be folded down out of the way when you're not using it or turned into just a shelf instead of a box. I've linked a video for you to take a look at. It's with a different tonneau cover but it fits the same wth your MX4.
    view full answer...

  • Compatibility of Tonneau Cover with Rail Mounted Toolbox for 2014 GMC Sierra 1500 6.5 Foot Bed
  • Extang EnCore Hard Tonneau Cover - Folding - Fiberglass-Reinforced Plastic - Locking # EX62450 will use different rail styles than the TruXedo TonneauMate Truck Bed Toolbox - Crossover Style - Poly Tub with Aluminum Rails # TX1117416 so they are not directly compatible. You could customize mounts, let the toolbox rest on the bed, or use the TruXedo Sentry CT Hard Tonneau Cover - Roll Up - Aluminum, Polyester, and Vinyl - Matte Black # TX1572016 which would be directly compatible. If...
    view full answer...

  • Truck Bed Tool Box for the BAKFlip MX4 Hard Tonneau Cover 2017 GMC Sierra 1500
  • I do have a truck bed tool box designed to work with the BAKFlip MX4 Hard Tonneau Cover part # BAK48120 for your 2017 GMC Sierra 1500 but the TruXedo TonneauMate Truck Bed Toolbox part # TX1117416 will not work as it is only designed to be used with TruXedo tonneau covers not BAKFlip tonneau covers. For a toolbox that is confirmed to work with your BAKFlip MX4 Hard Tonneau Cover, I recommend the BAKBox 2 Collapsible Truck Bed Toolbox part # BAK92120. This toolbox is 10" wide x 10" deep...
    view full answer...

  • Compatibility for BAKFlip F1 Hard Tonneau with Slide-In Bed Liner on 2014 Chevy Silverado 1500 6.5ft
  • The BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass # BAK72121 will fit a 2014 Chevy Silverado 1500 with 6-1/2 foot bed. Because of the way this tonneau cover installs, you may need to trim your slide-in bed liner at the clamp locations. With many styles it will be compatible without any trimming necessary. I've attached a video as well as the installation details to assist. The BAKFlip F1 is one of the best options for a tonneau cover based on design and really works...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Video by:
Andrew K
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
David L
Video Edited:
Jacob T
Test Fit:
Hayden R
Updated by:
Sarah W
Updated by:
Ronnie R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.