B&B Exterior RV Cable TV Inlet - 1 Coaxial Connector for Cover - Black

Video Transcript for Detailed Breakdown of the B and B Exterior RV Cable TV Inlet

Hello neighbors, Steven here with etrailer.com. Today we're looking at our B&B exterior RV TV cable inlet for one coaxial connector. Now folks, this does come in the black color here you see before me. It is a plate-style exterior mount with a singular coaxial cable inlet for your RV. Now you can connect an incoming TV, Internet, or satellite coax cable to your rig, and the attached cover heel is gonna seal it up, keep water and dust out while you're driving, not in use. The whole thing is a UV stabilized plastic material.

While the cover is a rubber cover that's also been UV stabilized, it's not gonna fade on you, turn different colors. The road salt, grime, chemicals, none of that's gonna hurt it. It does include the mounting hardware you see before me. You got three screws. They've been painted black on the head, which is very nice.

And you got some butyl tape here. If you're not familiar, butyl tape is basically like a putty substance. It's gonna squeeze out nice and flat. You'll cut a one-inch hole, per the manufacturer, that gives you plenty of space to put that in, push it into the wall, after you put the butyl tape on, and then from this side, put the three screws in, and you're good to go. Now the transfer rating is one gigahertz per inlet, and it's a nice one-year warranty.

The overall dimension side to side is three and one-eighth inch diameter. And again, the manufacturer recommends a one-inch circular cutout on the back for install. Well, folks, I'm Steven. Thanks so much for watching with me today, and have a great one.