Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID

Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID

Item # 44-5356A

lowest price pledge

Retail:$1.34

Our Price: $0.98

You Save: 27%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.09 lbs

Quantity: 
In Stock, Ships Today
Fastenal Wiring - 44-5356A
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Wiring
  • Wire Connectors
  • Ring Terminals
  • Fastenal
  • 12-10 Gauge
  • 5/16 Inch
Call 800-298-8924 to order Fastenal accessories and parts part number 44-5356A or order online at etrailer.com. Free expert support on all Fastenal products. Guaranteed Lowest Price and Fastest Shipping for Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (8)
  • Q & A (24)
  • Videos (1)
  • Photos
  • Why etrailer?

Fastenal Accessories and Parts - 44-5356A


Ring terminals are used for all types of electrical work where wires need fastening

  • For use with 12-10 gauge wire
  • Stud size: 5/16"
  • Vinyl insulation sleeve is yellow


44-5356A Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID







Video of Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for 3M Wiring 44-5356A Review

Today we're going to review part number 44-5356A. This is the 3M Ring Terminal for size 10-12 gauge wire. This the 5/16" ring diameter size. These ring terminals are used for all types of electrical work where wires need to be fastened. This one is used for use with a 10-12 gauge size wire. It is designed to fit on a stud size of 5/16". It does have the vinyl insulation sleeve you can see, which is yellow. Basically, to show you how this would attach the wire I have section of 12-gauge wire right here.

I actually stripped maybe a little less than 1/2" off of there. What you want to do is basically you would slide the bare portion in right to where the metal portion is right there. You really don't want to slide it too far so it's exposed. You actually want to keep most of it underneath there. Once you have it underneath there, what I'll do is take a .. Here's a set of wire strippers.

The wire strippers will have the crimpers right down here. All you have to do is put this right in the correct size. Then when you push down on it like that, you squeeze hard enough, you can see that it will crimp that wire to that metal portion, to the ring terminal, and give you a good connection. It's not going to go anywhere. You can see you really don't want to have any of that bare wire exposed, so you want to keep it under the insulation sleeve. That should do it for the review on part number 44-5356A.

This is the 3M Ring Terminal for 10-12 gauge size wire with a 5/16" inside ring diameter. .


Customer Reviews

Ring Terminal - 12-10 Gauge Wire - 5/16" Ring ID - 44-5356A

Average Customer Rating:  5.0 out of 5 stars   (8 Customer Reviews)


- 44-5356A
by:

Im all thumbs and was able to totally rewire my trailer in an hour or so. No problems. I am legal again with my lights!! Thanks. 499938



- 44-5356A
by:

Prompt shipment...good quality 491810



- 44-5356A
by:

Prompt shipment...product is good quali ty 491804



- 44-5356A
by:

WORKED AS SHOULD 453464


Comments

Work perfect

Harold - 11/19/2018

45865

- 44-5356A
by:

Ordered several things to hook up trailer brake controller on my 2014 Jeep Wrangler Unlimited. Everything was promptly shipped and at a fair price. Will use etrailer.com again, if I have the need. 252785



- 44-5356A
by:

Everything arrived in a timely manner. Would use this vendor again. 223758



- 44-5356A
by:

All items were great 210362


Comments

still working great

chuck b - 07/07/2016

19158

- 44-5356A
by:

Very fast and accurate delivery. Good quality products 177176


8
8

Ask the Experts about this Fastenal Accessories and Parts

Do you have a question about this Accessories and Part?


  • Will SMI Stay-IN-Play DUO Drain Battery on 2006 Jeep Liberty While Flat Towing
  • Since the SMIStay-IN-Play DUO Supplemental Braking System # SM99251 uses power from your 2006 Jeep Liberty's battery to engage the compressor, it is possible that the Stay-IN-Play could potentially drain the vehicle's battery over the course of a number of hours. We have not heard reports from our customers on this, but it is a possibility. I was not able to find any known issues of the Liberty's battery being drained while in tow mode in the vehicle's owner's manual. One thing...
    view full answer...

  • Adding an Auxiliary Power Circuit to a 7-Way Trailer Connector on a 2011 Chevy Silverado 1500
  • First, use a circuit tester like # ALL640595 if needed, to test the 7-Way trailer connector. The 12 volt circuit will be in the 1 oclock position. If the trailer side connector pin that corresponds with the 12 volt circuit is connected to the battery on the trailer, then you will not have to change or add anything. If it is not, you can either connect the battery to that circuit or use the auxiliary pin in the center. Again, use the circuit tester to test the center pin. It may be connected...
    view full answer...

  • Installing Prodigy P3 Brake Controller on 2016 Forest River Forester on Sprinter 3500 Chassis
  • I can help you find the parts you will need to install a Prodigy P3 Trailer Brake Controller # 90195 on your 2016 Forest River Forester on a Sprinter 3500 chassis. The P3 will need to be hardwired since there is not a custom wiring harness available for the 2016 Sprinter 3500. The parts you will need to install the brake controller are: Approximately 35 feet of duplex wire # 10-2-1 30 amp circuit breaker # 38630 A 5 pack of 10-12 heat shrink butt connectors # DW05745-5 2 yellow...
    view full answer...

  • Re-Wiring Old 4-Wire Boat Trailer Plug With a New 7-Way Trailer Plug
  • Considering that the 4-wire round connector on your Dad's old boat trailer may be nearing the end of its life (due to use and corrosion) you will be better off replacing the 4-way round connector with a 7-way plug such as # H20046 from Hopkins. Installing a new trailer-side male plug will also avoid the complication and cost of having to use an adapter and it will make the trailer much more user-friendly to the majority of tow vehicles likely to pull it in the future. Installing the...
    view full answer...

  • How to Rewire Trailer for 6 Way Connection with Separate Turn Signals and Brake Lights
  • First you will want a new 6-way like the Hopkins 6-Way Molded Connector, # H20036. Installing the 6-way plug will be made easier by using a junction box such as # 38656. This box mounts to the trailer frame and serves as a connection point between the trailer's original wiring and the new 6-way. Also you will want some Deka jacketed 2 wire, 10 gauge, brake wire # 10-2-1 to run the brake output circuit from the junction box to the brake assemblies as well as some Deka 16-gauge bonded 4-wire...
    view full answer...

  • Getting Power to 12-Volt Accessory Pin on 7-Way Trailer Connector
  • To get power to the pin in the 1:00 position of the # PK12703 7-way trailer connector, you'd run a length of 10 gauge wire # 10-1-1 which is sold by the foot from the terminal for the 1:00 pin on the 7-way to the positive battery terminal, via a # 9510 40 amp circuit breaker. You'd need two # DW05741-1 ring terminals to connect to the breaker and a # 44-5356A ring terminal to connect at the battery.
    view full answer...

  • Tow Dolly and Brake Controller for Towing Vehicle Behind Motor Home
  • We do offer a tow dolly with electric drum brakes, the Roadmaster # RM-2000-1, which fits a 2-inch hitch ball. This dolly has a 4,380-lb weight capacity for the loaded vehicle. It includes electric brakes, 4-pole wiring harness with extra wire for the brake circuit, loading ramps and wheel nets that fit tires from 12 up to 16-inches. The brake controller I recommend is the Prodigy P2 # 90885. This reliable unit is highly rated by our customers and it works with both electric and electric-over-hydraulic...
    view full answer...

  • Trailer Brake Controller Installation in 2014 Jeep Wrangler JK
  • Your 2014 Jeep Wrangler JK does not have a plug-in brake controller port under the dash so wiring in a controller like the Prodigy P3 # 90195 will require hardwiring. We offer a complete installation kit # ETBC7 that includes all the parts needed, including a 7-way. Although you have a 7-way socket now, its not a bad idea to have a spare on hand. The kit includes the duplex wiring to bring brake and 12V power signals to your trailer connector, and circuit breakers and connectors to install...
    view full answer...

  • Parts Needed to Have 7-Way Socket on Trailer for Powering Electric Tongue Jack
  • It sounds like your trailer has a 7-way RV-style plug like # H20044 that is taking 12V power from the auxiliary trailer feed to power your jack. This means the power for the jack is coming from the vehicle battery. If your trailer has a battery or two and you prefer to power the jack from these instead, all you'd need to do is install a 7-way socket like # 30717 on the trailer. You'll only need to make two wiring connection to have 12V battery power ready at the new socket. Connect...
    view full answer...

  • 7-Way Trailer Connector Bracket and Providing a Maintenance Charge To Camper Battery While Towing
  • For a bracket that will allow you to mount your 7-Way trailer connector, we have mounting brackets such as the Mounting Bracket and Installation Hardware # 18138. Depending on how you are mounting your 7-Way connector, you may also be interested in a No-Drill Mount Bracket, which is available in Long # C57202 and Short # 18140. While there is no way for the battery on your 2003 Honda Pilot to charge a dead battery on your pop-up camper while you are towing, a 12V power wire will allow...
    view full answer...

  • Connectors Needed for Connecting Husky Brute Jack to Trailer Battery Post
  • If you have top posts you can use the part # DW05418 to give you an additional post on top of the terminal bolt that a ring terminal part # 44-5356A will fit. Almost all batteries out there will use this style of post.
    view full answer...

  • Ring Terminal Recommendation that's Larger in Diameter than # DW05702-1
  • Ring terminals are great for connecting wiring to trailer wiring as it makes for an easier and cleaner install. If you need a larger diameter ring terminal than the # DW05702-1 which has a diameter of 1/4 inch we have the # 44-5356A which has a diameter of 5/16 inch.
    view full answer...

  • Ring Terminal Butt Connector Availability
  • I really wish we did, but the largest ring terminal wire gauges we carry is 10 gauge like the part # 44-5310A for a 3/16 inch ring diameter, # 44-5356A for a 5/16 ring diamter, or a part # DW05705-1 for a 3/8 inner diameter. For an excellent airtight and waterproof sealant for your wiring connections I would recommend the Deka Self-Fusing Auto Tape # DW04367.
    view full answer...

  • Options for Adding Electric Drum Brakes to Motorcycle Trailer
  • We can help you with the project of adding electric drum brakes to your motorcycle trailer. You may care to have a look at the linked article which covers the entire process and the items needed. Generally a trailer with GVWR of 1200-lbs will not require brakes in most states but you can check your local state regulations to be sure. I suggest you consider a whole new axle kit that includes brakes. This will save you a lot of time and labor costs too since the brake flange is already...
    view full answer...

  • Locating Power Wire Under Hood of 2010 Chevy Silverado to Install Brake Controller
  • If you can't find the wire between the distribution box and the fender, it might be installed already. Check the post on the front of the distribution box, shown in the photo I provided. If the wire is attached, the tow package power wire under the dash should be active already. If it's not, you can use a length of 10 gauge wire like 10-1-1. Use a ring terminal like # 44-5356A on one end, and the other end would go through the firewall to attach to the black wire on the brake controller....
    view full answer...

  • Tekonsha P3 Installed on 2004 Chevy Silverado is Not Getting Power
  • First, check the power distribution box and ensure that the wire feeding the brake controller is connected to the power post as shown in the photo I have provided. If not, locate the RED wire with ring terminal, which should be located between the fuse box and the firewall. If this wire is indeed in place, lets confirm that there is not power reaching the controller. Unplug the # 3015-P wiring harness from the rear of the controller, and use a circuit tester like part # 40376 on the...
    view full answer...

  • Parts Needed to Mount 7-Way Connector and Run Power Wire to Vehicle Side Connector
  • It sounds like you have a 7-Way blade-style connector at the back of your Corolla. We offer several mounting bracket options to secure a 7-Way connector like you referenced under your vehicle. The most popular bracket is the Mounting Bracket and Installation Hardware # 18138. I have attached a review video of this bracket for you. I have attached a link to all of our mounting brackets for 7-Way connectors. You can certainly connect your vehicle's 7-Way to the vehicle battery in...
    view full answer...

  • Adapting Different Connectors on 2014 Mercedes GLK250 and Prolite Suite Trailer
  • Vehicle and trailer connectors come in several varieties, including both 6-way round and 7-way blade types. The linked article on trailer wiring illustrates both, as well as other types. These two types are NOT compatible with each other. Within each type of connector sizes are usually standardized, although the actual wire configuration (what particular signal is carried by any given pin/wire) can vary by brand. My associates and I have not heard of this issue before but certainly...
    view full answer...

  • Making a Complete Ground on a Simple Utility Trailer
  • The white ground wire just needs to be attached to the frame or tongue of the trailer so that the entire trailer frame and structure becomes an electrical ground. Make sure the ground has direct contact to the metal. Paint can sometimes act as an insulator preventing a good ground connection. Use a ring terminal, like part # 44-5356A, and attach it to the frame with a metal screw. It sounds like the lights on the trailer are grounded to the trailer body, so by attaching the short white...
    view full answer...

  • Wiring 4 to 7-Way Trailer Connector Adapter on 2010 Toyota FJ Cruiser for Prodigy RF Brake Control
  • In addition to the brake controller # 90250 and the 4 to 7-Way adapter, # 30717, you will need some additional wiring and a circuit breaker. The Prodigy RF brake controller does not require that all of the loose wires on the adapter be installed. It only needs the regular light functions (which are provided by the 4-Way that you plugged into the adapter), the white ground wire, and the power wire. The white wire will ground to the vehicle frame. The blue wire will not be used since the...
    view full answer...

  • Ring Terminal Recommendation for Circuit Breaker 9506P
  • Sounds like you are looking for ring terminals to use with the circuit breaker part # 9506P. For that you would want the Ring Terminal # 44-5356A which has a 5/16 inner diameter and is designed for use with 10-12 gauge wires. The side of the breaker that has the copper looking post will be the side that runs to the battery and the other side will run to the accessory you will be powering.
    view full answer...

  • Using 30 Amp Circuit Breaker with a Ham Radio Powered by Car Battery
  • You can use 10-gauge wire # 10-1-1 and a 30 amp fuse, but a 30 amp in-line circuit breaker like # 38630 or # PK54530 will automatically reset if you experience a short or overload. With a fuse you would have to replace it. The 10-gauge wire is sold in 1 foot increments. There are 2 terminals on the circuit breaker. The copper-colored one labeled BAT connects to the battery and the one labeled AUX will go to your radio. You will need ring terminals like # 44-5356A. I have linked...
    view full answer...

  • Options to Power Lights in Trailer Without Being Connected to 7-Way on Truck
  • When it comes to running the lights in your trailer without having to hook to the 7-way on your truck, I recommend using some 10 gauge wire to add a car battery to your trailer for power. You'll just need a few supplies in addition to a battery; 10 gauge wire, # 10-2-1 (sold by the foot), 2 ring terminals like # 44-5356A, and a couple quick splice connectors, # 562. Just find a spot on the trailer for a battery, splice into the 12 volt circuit on your 7-way with one of the wires in part...
    view full answer...

  • Troubleshooting 7-Way Connector of 2006 Toyota Sequoia With No 12-Volt Feed at 7-Way
  • If your 7-way on your Sequoia was installed at the factory, the 12-volt circuit should be active. Check the fuse box under the hood for a blown or missing fuse. If there's no blown fuse, you trace the 12-volt circuit from the rear of the vehicle looking for a loose connection, but abandoning the original and installing your own circuit as described below might be the simplest course of action. If the 7-way was installed aftermarket, check the terminal for the 12-volt pin at the rear...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Video Edited:
Joshua S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.