CargoBuckle Cam Buckle Tie-Down Straps w/ S-Hooks - 1" x 6' - 267 lbs - Qty 4

See what our Experts say about this CargoBuckle ATV-UTV Tie Downs

• Do You Have a Utility Trailer that is Smaller than the K2 Mighty Multi Trailer # K2MMT4X6
  I have a solution for you. Unfortunately, we do not currently carry a utility trailer that is smaller than the Detail K2 Mighty Multi Utility Trailer # K2MMT4X6 with the dimensions of 72inch long x 48inch wide x 7 1/2 tall. However, if you are looking for the next smallest option, it would be the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR. The Flint Hill Goods carrier has inside dimensions of 48" long x 28" wide x 5" deep tall. In addition, the Flint...
  view full answer...
• Trailer Hitch, Wiring and Ball Mount for 2017 Ford Mustang
  There is a potential way for you to haul an electric wheelchair with a 2017 Ford Mustang, although there is not an adapter that is going to work. The reason for that is there is just one 1-1/4 inch to 2 inch adapter with rise that works with a Class I hitch, and that adapter, the Brophy # HT5R, has a 5 inch rise, which doesn't meet your needs. Additionally, the use of any adapter will reduce the weight capacity of your hitch by 50 percent, and since there are only Class I hitches with a...
  view full answer...
  
• Trailer Hitch and Cargo Carrier Recommendation for a 2013 Nissan Juke
  We do have trailer hitches and hitch mount cargo carriers that are compatible with your 2013 Nissan Juke. If you have the AWD model I recommend the Draw-Tite # 24867 but if you have the FWD model than I recommend the Draw-Tite # 24892. I like the Draw-Tite over the Curt for your application because Curt requires the stabilizer strap # 18050 be used with a cargo carrier. Although it doesn't hurt anything (and can be beneficial) it isn't required by Draw-Tite. Then for a cargo carrier I...
  view full answer...
  
• Will the Thule Xporter Pro Shift Rack System Work with My Folding Tonneau Cover on My 2021 Tundra?
  I have a solution for you. In order for the Xporter Pro Shift # TH54RR to work on your 2021 Toyota Tundra is if you pair the Pro Shift with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH24RV. This is how you will be able to mount the Xporter with the tonneau cover you have pictured. Since the TracRac SR base rails install into your truck's stake pockets, you will be able to use the Xporter Pro Shift without interfering with the bed rails. Also, it is important to...
  view full answer...
  
• Recommended Frame Mounted Trailer Hitch And Cargo Carrier For Lance 2375 Travel Trailer
  Using a bike carrier to carry a generator would certainly void the warranty of the carrier and may create an unsafe situation. I recommend installing a frame mounted trailer hitch like part # 13703 on your Lance 2375. This hitch will work with C-channel, I-beam, or box frames from 22 to 72 inches wide. The trailer hitch has a tongue weight capacity of 350-lbs. Per Curt, any non-trailer loads applied to this product must be supported by auxiliary stabilizing straps like part # 18050. For...
  view full answer...
• Rhino-Rack Rooftop Cargo Tray for Installation on Yakima Round Bar Rack System
  The two sizes of Rhino-Rack Pioneer rooftop cargo trays, parts # RR42114BF (48 x 38) and # RR42115BF (58 x 47), will fit on round Yakima roof rack crossbars. These Rhino-Rack brand rooftop tray-style carriers are shown on the linked page. Both work on round bars thanks to included universal-fit hardware. You will need cargo tie downs to secure your cargo to the tray. We offer all sort of tie down straps to keep your cargo safely secured to the tray. I linked our page for cam-buckle strap...
  view full answer...
• Waterproof Cargo Bag For Smaller Cargo Carrier
  I would recommend the Rhino-Rack Rooftop Cargo Bag Part # # RRLB200. Although it is listed as a rooftop bag, it provides the dimensions, size, and tech you are needing to accommodate your carrier. It has dimensions that are just a little wider and longer than your carrier, but not too much to have overhang of the bag. It is 55"x19.5"x11.5" in dimension. It is waterproof, not just water resistant, this will help protect your valuables and cargo from the elements during trips. I suggest...
  view full answer...
• Curt Class III and Class IV Hitch Comparison for 2018 Ford Transit T350 Passenger Van
  You are correct that we offer both Class III and Class IV 2-inch hitches for your 2018 Ford Transit T350 passenger van. If trailer towing were your intended application then the Class IV hitch # C14012 would definitely be my top recommendation since it can tow 2000-lbs more weight than the Class III model # C13193. But since your intended use is with a hitch-mount cargo carrier like # C18151 I recommend instead that you go with their Class III hitch # C13193 since it has a higher tongue...
  view full answer...
  
• Hitch and Cargo Carrier for 5th Wheel Hitch to Carry Generator
  In order to carry your generator on the back of your 5th wheel, you will need a hitch so you can attach a cargo carrier. Assuming the ramp on your Palomino will allow the hitch, you can easily add one, the Adjustable Width Trailer Hitch Receiver for RVs # 13703. You simply need to measure the frame to make sure it is between 22 and 77 inches wide outside-to-outside in order to install this hitch, which can then be bolted or welded on. The hitch has a 350 lb tongue weight capacity, which...
  view full answer...
• Will the Reese Solo Carrier # PS1040100 Fit a 35" long x 35" wide x 6' tall Refrigerator?
  I have a solution for you. Unfortunately, the 35-inch length/width of your refrigerator will not be able to fit on the 32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs # PS1040100. With that being said, a great solution for transporting your refrigerator is the Detail K2 Mighty Multi Utility Trailer - 6' Long - 1,295 lbs # K2MMT4X6. The K2 trailer has a bed dimension of 72" long x 48" wide x 7-1/2" tall and can hold up to 1,295 pounds. If you decide to go this route, you...
  view full answer...
• Comparing Draw-Tite Trailer Hitches for 2018 Ford Edge Titanium & Edge Tongue Weight Capacity
  Let's start simple, which is the difference between the Draw-Tite Trailer Hitch # 75234 (square tube) and Draw-Tite Trailer Hitch # 75214 (round tube) that fit your 2018 Ford Edge. The difference is mostly just in the aesthetics, with the square tube hitch having a concealed crosstube, and the round tube hitch having a visible crosstube. The square tube hitch also has a higher overall capacity of 4,500 lbs towing and 675 lbs tongue weight compared to 4,000/600 of the round tube, but since...
  view full answer...
  
• Where on Trailer Frame to Measure for Adjustable Width Trailer Hitch for RVs
  Thanks for all those measurements! There is a trailer hitch that will work great for your travel trailer, though the measurement you want to go with is from outside to outside, which you said was 70-1/2 inches. That means the correct hitch is the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This is a Class III hitch with a 2" receiver and 350 lb tongue weight capacity so you will be able to carry a good deal of cargo with it. For a cargo carrier on the rear...
  view full answer...
  
• Will the CargoBuckle Tie-Downs # IMF12637 Fit With the Curt Cargo Carrier # C18110
  Yes, I went out to the warehouse and compared the CargoBuckle Cam Buckle Tie-Down Straps w/ S-Hooks # IMF12637 and the 20x48 Curt Cargo Carrier for 1-1/4" and 2" Hitches # C18110 and the Tie-Down straps will have more than enough room to fit the holes on the Curt cargo carrier.
  view full answer...
• Strap Recommendation for Securing Rear of Sea-Doo to Trailer
  What you are looking for is a transom strap. We have the BoatBuckle Kwik Lok # IMF17631 which is 2 feet when fully extended that would work well.
  view full answer...
• Can Thule Stacker Be Used With 3 Kayaks Weighing 40lbs Each?
  Thule The Stacker - Rooftop Multi-Kayak Carrier # TH830 actually would work well for you because the weight of your kayaks will be on the crossbars, not directly on the Stacker. The Stacker will only be taking a fraction of the weight when the kayaks are leaning against it. Just make your your roof and roof rack can handle the 120-130lbs you are adding. If you don't already have a roof rack setup then I would go with Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 and Legs # RRSX026 which...
  view full answer...
• RV Hitch Carrier for Transporting Honda 7000W Generator
  We offer lots of hitch-mount cargo carriers and for use with a larger generator like the Honda 7000W (which has wheels) I suggest a ramped carrier. The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR offers interior dimensions 48 long x 28 wide x 5 tall. It also has a 500-lb capacity and includes an anti-rattle device. For an anti-rattle hitch lock use part # 63232. You'll also need some type of tie-downs to secure the generator to the carrier. I suggest...
  view full answer...
• What Determines Cargo Weight Limit for Hitch Carrier Installed on RV Bumper Hitch
  The amount of actual cargo weight you can safely transport on a hitch cargo carrier installed in a bumper-mounted hitch is determined by the lowest-rated component. Those components consist of the RV's bumper, the hitch such as # UF35-946401 that is mounted on it, and the cargo carrier itself. The lowest-rated of the three items will determine overall capacity. If you have a 500-lb-rated cargo carrier like Curt # C18151 and install this in the 200-lb-rated Ultra-Fab RV Hitch # UF35-946401...
  view full answer...
• How Can I Transport My Mobility Scooter on My 2009 Kia Spectra?
  From the information I have on your mother's 2009 Kia Spectra, her vehicle has a maximum tongue weight rating of 200 pounds. With that maximum vehicle rating, even if there was a hitch receiver rated for over 200 pounds, you would still need to abide by that 200-pound maximum capacity of the vehicle. With that being said, unfortunately, the only hitch we carry for her vehicle is the Curt Hitch - 1-1/4" # C11679. In order to make sure that your mother's Spectra has a maximum weight capacity...
  view full answer...
• Considerations for Selecting Cargo Net and Tie-Down Straps for Use on Rola Rooftop Cargo Basket
  Yes, the cargo nets we offer such as Curt # C18201 are measured unstretched. This particular one measures 38 x 65. Keep in mind that the size of net you need depends as much on your cargo as on the basket. For example, if you're transporting flat items that remain within the enclosed volume of the basket a smaller net might provide the snug fit you want. If you were to have tall cartons placed in the basket you might need a larger net to accommodate their height. We have many nets to...
  view full answer...
• Can Cargo Carrier be Used Behind an RV
  There is a cargo carrier you can use on an RV but it is recommended it be one with a completely solid shank as opposed to one which folds and tilts; the reason for that is the amount of movement at the rear of an RV will be much greater than the back of a passenger vehicle and a solid shank will give your carrier the added stability to handle that much movement. The cargo carrier I recommend is the Curt Cargo Carrier # C18152 because like the etrailer.com Cargo Carrier it measures 60"...
  view full answer...
• Hitch Installation Support Jack for Stability
  To have a support, we normally use a second set of hands because that is the safest and easiest option. When another set of hands is not available, an option is to use the Ultra-Fab Slide-Out Supports for Motor Homes - 21" to 37" - Qty 2 # UF19-960002 to adjust the height of the hitch and support it. I recommend using straps like # IMF12637 to also secure the hitch to the supports if you use these supports.
  view full answer...
• Can the Curt Cargo Carrier # C18152 Mount Onto the Front of My Truck?
  Yes, the 24x60 Curt Cargo Carrier # C18152 can be mounted on the front of your truck if you have a front 2-inch hitch. To mount it to your hitch you can use Pin and Clip # PC3 or to protect your investment you can lock it to your hitch with Trailer Hitch Receiver Lock # e98880. You may also be interested in the Cam Buckle Tie-Down Straps # IMF12637 and Curt Stretchable Cargo Net # C18200 if you have gear you don't need to keep out of the elements. If you need a front hitch recommendation...
  view full answer...
• Is the Cargo Carrier # e98874 Compatible with a 2015 Subaru Forester and 2016 Nissan Frontier
  The 24x60 etrailer Cargo Carrier for 2" Hitches # e98874 should fit just fine on both your 2015 Subaru Forester and your 2016 Nissan Frontier as long as they both have 2 inch trailer hitch receivers. You can do some measuring just to make sure though. From the center of the hitch pin hole to the closest part of the rack when it is folded up is 9-1/2 inches. Typically this will be enough room but you can go measure it if you feel the need to. That same measurement with the carrier folded...
  view full answer...
• What is the Height of the # 59502 from the Top of the Shank to the Top of the Railing?
  From the top of the shank (the part that goes into the hitch receiver) to the top of the railing of the 22x59 Rola Cargo Carrier for 2" Hitches 59502, it is about 6-3/4 inches high. If the Rola Cargo Carrier is too high for you to open the doors on your 2021 Sprinter 2500 chassis, there are other cargo carriers that do not the added 2-inch rise of the Rola carrier. For a solution of a carrier that doesn't have rise in the shank and is RV approved, I recommend the 23x59 Stromberg Carlson...
  view full answer...
  

Do you have a question about this ATV-UTV Tie Down?