Fulton F2 A-Frame Coupler w Adjustable Jack - 2-5/16" Ball - 10,000 lbs

Video Transcript for Fulton A-Frame Trailer Coupler - Standard Coupler - F141325-44305 Review

Speaker 1: Today we're taking a look at the Fulton F2 A-Frame Coupler with the Adjustable Jack. Now the heavy-duty coupler fits A-Frame trailer tongues. It has the wedge latch mechanism for quick and easy hookup and disconnect. That's made from a durable steel construction with a gray prime finish so it can be painted to match your trailer. This is a weld-on installation. The opening here at the back of the coupler from inner edge to inner edge measures 10-1/2".

It is designed for a 2-5/16 hitch ball. As you can see, the F2 series jack simply bolts to that coupler with the included hardware. This jack is perfect for marine applications. It's virtually maintenance free. It features a sealed and lubricated one-piece gear box, which eliminates the need for manual lubrication, and it has an anodized finish on the inner and outer aluminum alloy tubes to prevent rust, even in the harshest conditions.The unit also has the sharkskin finish on the steel components and that provides maximum corrosion resistance.

It is environmentally friendly. It's a self-healing finish that's designed for use in salt water and other demanding environments. It's gone through a 1,200 hour salt spray testing. It has a 1,200 hour salt spray rating. Right here is a very easy and comfortable to use ergonomic side-wind handle.

It's made of strong plastic for durability and ease of use. You also don't have to worry about rust or corrosion with a durable plastic construction.Now, I do want to point out the coupler height is completely adjustable. You loosen up these two bolts, and you can actually move this whole bracket up or down. That way it'll fit pretty much any A-Frame style trailer out there on the market. It's a nice design.

It's easy to use. Again, maintenance free and rust and corrosion resistant. The adjustable height is great to fit your application. You'll notice that on the base of the jack, it does not come with the footplate or caster assembly. Those items are sold separately and available at etrialer.com.Once again, this is designed to accept a standard 2-5/16" hitch ball. The coupler itself has a capacity of 10,000 pounds. You'll notice right here, there's a small hole. That way you could pass through a coupler pin or a coupler lock. Those items are not included. You'll need to make sure that your pin has a usable pin length or a span of at least 1" and a diameter that doesn't exceed 1/4 of an inch. When it comes to the jack, we're looking at an overall height measurement in the fully retracted position from top to bottom of 24". That extends to 33" when fully extended. That gives us a lift or travel of 9 inches.The tubing width, that's this tube right here. That's 2-3/4". Then the bottom portion has an outer diameter of 3". There are specific footplates or caster assemblies made for this particular jack, the F2 jack. To see those options, you can look at this product's page at etrailer.com or look under the related content to see what's available. They are sold separately and we do carry them at etrailer.com. This unit also has a lift capacity of 2,000 pounds. It's really nice, smooth operation when raising and lowering. There's no kinking or binding. The product is covered with a limited lifetime warranty. That's going to do it for today's look at the Fulton F2 A-Frame Coupler with the adjustable trailer jack.