Vehicle Style: 6-1/2 Foot Bed with OEM Prep Pkg Change
Fifth Wheel Hitch: C55DR
Price: $1,154.95
Installation Rails: C29BR
Price: $465.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C29BR
Below Bed Rails
0.5 Hour Estimated Installation Time
More Information >Fifth Wheel Hitch: C55DR
Price: $1,154.95
Installation Rails: C16022
Price: $450.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16022
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 4 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch: C16541
Price: $1,236.55
Installation Rails: C29BR
Price: $465.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C29BR
Below Bed Rails
0.5 Hour Estimated Installation Time
More Information >Fifth Wheel Hitch: C16541
Price: $1,236.55
Installation Rails: C16022
Price: $450.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16022
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 4 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
The OEM prep package consists of 4 "pucks" in the bed of the truck that will…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I…
view full answer...The Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16046 will work well with the Roto-Flex pin box. The combination will be a good match for you and this hitch with the specific connection to the factory prep package pucks will make…
view full answer...Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail…
view full answer...Filter Products (10)