To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Customers prefer these similar products
Heavy-duty 5th-wheel hitch has a 1-piece, wraparound jaw and easy-to-see lock indicator for maximum safety and security. Fully articulating head with large landing area and king pin target make hookup a snap.
Features:
Specs:
The one-piece jaw on this fifth-wheel hitch provides absolute security with its wraparound design. Increased jaw-to-king-pin contact results in not only a stronger connection, but less noisy rattling and stiff chucking as well.
The jaw is also always ready to receive, so you don't need to use the handle to open it before backing up toward your trailer. As long as the bail pin is removed from the latching handle, the jaw will accept the king pin as it enters the hitch.
Finally, the jaw is self-latching, so it will automatically secure your trailer's king pin when it moves into the jaw.
In addition to the tight jaw tolerance, a close connection between the head and the pivot bushings further reduces rattle and movement. And because the pivot bushings are independent from the head, they can be tightened to ensure a strong connection over time.
This M5 hitch features a built-in king pin indicator to ensure proper hookup. This indicator is located on the back of the head along with a V-shaped notch that are both visible from the cab of your truck. The V-notch is lined up with the jaw at the front of the hitch, and can be used as a guiding point to line the king pin up with the jaw as you back up your truck. The jaw also has an internal plate that keeps the king pin from entering if it is too high to enter safely. As a result, the king pin indicator will only change from red to green if the king pin is fully engaged in the jaw.
This hitch's handle is designed for smooth motion and effortless operation. It requires only 2 fingers to use and won't bind up as you pull. In addition, the handle is long, so it's easy to access from outside of your truck bed. And the ergonomic grip makes it comfortable to hold and pull from different angles.
Alternate Instructions
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Reese 10 Bolt Extended Length Outboard Base Rails for 5th Wheel Trailer Hitches.Now, these base rails will install in your truck bed and they provide necessary attaching points for a 5th wheel trailer hitch. The base rails included in this kit feature a standard 10 bolt design. Basically, each of these rails will attach to the underbed brackets with two carriage bolts at both ends, and then a single bolt is used in the center of each rail to further secure it to your truck bed. The result is you get a set of base rails that'll remain firmly in place, thanks to 10 points of contact.These rails are 48" long above-bed rails, make for a nice fast, simple installation when these are used with the Reese custom outboard brackets that we do sell separately on our website. Now, the outboard brackets are required for installation of these rails. They will not work with your standard 5th wheel installation brackets, and I do want to show you one of the outboard brackets that we sell.
They'll vary for each vehicle, so you got to get the one correct for your vehicle, but this is an outdoor bracket. Basically, this will mount to the outside of the frame rail, and you notice the bracket extends outward so it allows you to install these extended length base rails. The extended length base rails allow you to mount . allow your mounting further out from the truck frame, and this will avoid underbed components for easier access.This part includes everything shown here on the table: the grade-8 hardware with the necessary spacers are included to install it, it gives you a nice set of detailed instructions. These rails are compatible with Curt, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley Brands, and most standard 5th wheel hitches.
They're a sturdy steel construction. Has a nice black powder coat finish to them to help resist corrosion.A few specs on them: the dimensions is 48" long and the total height is 1-7/8" tall.But that should do it for the review on the Reese 10 Bolt Extended Length Outboard Base Rails for 5th Wheel Trailer Hitches.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.