Availability of Mirror Mount and USB-A/USB-C Adapter for Furrion Vision S+

Question

Question:

Re :Furrion Vision S+ 7inch Monitor - Is a mounting system available to attach the monitor to the vehicle 2024 F350 rear view mirror? - is a USB or USB C power cord available to use instead of the cigarette power cord?

asked by: Richard B

0

Expert Reply:

Hi Richard; the Furrion Vision S+ Wireless RV Backup System # FR57AD does not come with a mount for your 2024 F-350 mirror. You can use the suction cup and mount it near your rear view mirror but there is no specific mount for it.

The system actually includes two different cables. One is USB-C to 12V for the standard 12V socket. The other is USB-C to USB-A so you will be able to power it with a standard USB port in your F-350.

What kind of trailer will you be installing the camera on?

expert reply by: Robin H

0

Furrion Vision S+ Suction Cup Mount
(click to enlarge)

Richard

7/23/2025

Hi Robin; Thank you for the reply. The camera was installed by the factory on a 2025 Brinkley Z3100. Yes the USB C to USB A came with the camera but the tip of the USB A fallen off and I have not found a replacement so I decided to contact etrailer to see if a replacement is available; do you carry a USB A to USB C cable for this monitor? Thank you - Richard Bailey

Robin H.

7/23/2025

@Richard that's a little crazy that shouldn't happen. We don't have a replacement specifically for that monitor. Since it is new I'm betting if you tell Furrion what happened they will send you one. Realistically any USB-A to USB-C cable will work but if its under warranty I'd make sure to use theirs, especially if you're getting it replaced for free.

Greg

1/5/2026

@RobinH I have a Vision S 3 camera system and it didn't come with a USB power cable for the monitor. Where can I get one as my new truck doesn't have a cigarette lighter at all and the power cable that came with it won't stay connected to a USB A - cigarette lighter plug.

Richard

1/5/2026

@Greg I was unable to find a USB power cable and use the cigarette lighter adapter.

See All (5) Replies to Richard ∨

Answer 1

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…

view full answer...

Answer 2

Hey Scotty, so unfortunately Furrion recently discontinued the Vision S system and replaced it with the Vision S + which uses all new components and is not backwards compatible. What that means is that we don't have a replacement camera alone for…

view full answer...

Answer 3

While there isn't a more durable license plate bracket specifically designed to fit the Low Profile LED Combination RV Tail Light w/ Bracket #RVSTL11, this won't prevent you from putting a bracket like the #428-09 behind the light. While the…

view full answer...

Answer 4

Hey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps…

view full answer...

Answer 5

If there's ever an issue with the signal on a Furrion camera system is almost always comes down to lack of power. Plugging in your #FOS43TASF to the monitor cable is giving you a direct 12 volts to the camera whereas when installed on the trailer…

view full answer...

Answer 6

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

view full answer...

Answer 7

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Answer 8

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

view full answer...

Answer 9

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

view full answer...

Answer 10

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 11

Hey Mary! The 12V PWM Filter #VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ #FR57AD over the old Vision S. They use the same mount so this is…

view full answer...

Answer 12

There are adapters on the market that can go from a cigarette lighter style plug that the #C-FOS07TAPK-006 has to USB/USB-C ports but we don't currently offer any so the only solution I can provide is the #RM-9332. This is a replacement outlet…

view full answer...

Availability of Mirror Mount and USB-A/USB-C Adapter for Furrion Vision S+

Product Page this Question was Asked From

Continue Researching