Replacement Spring Bar for a Pro Series V-5 Hitch 113913 Weight Distribution System

Question

Question:

One pf my spring sway bars fell out it goes to a reeces weight dirt hitch 113913 pro series v-5 hitch

asked by: Sherburne T

0

Expert Reply:

The Pro Series V-5 Hitch 113913 is an older weight distribution system that is not available anymore and has limited replacement parts. It uses the Pro Series RB2 item # 58333 head and the only available replacement spring bar is the Replacement Round Spring Bar for Reese Weight Distribution System - 800 lbs TW item # RP58114.

expert reply by: Jerred H

0

Answer 1

If you're looking for the best and most tried and true electric trailer brake controller option on the market then it's hard to make a case against the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 with its easy to read display,…

view full answer...

Answer 2

The best trailer brake controller for a 2021 GMC Sierra 1500 is the Redarc Tow-Pro Elite Brake Controller part #RED63RR. This is a hidden controller so you don't have to worry about banging your knee on the controller when you get in/out like you…

view full answer...

Answer 3

We have not yet been able to confirm fitment of any towing mirrors for the 2022 Chevrolet Silverado 1500. However, the Longview Custom Towing Mirrors, #LO54FR are a confirmed fitment for the 2019 - 2021 year models and the 2022 is of the same…

view full answer...

Answer 4

To add a brake controller to your 2022 Chevy Silverado 3500 you are going to want the Redarc Tow-Pro Elite Brake Controller item #RED63RR. This brake controller has a unique installation method where you can mount the control knob on your dash or…

view full answer...

Answer 5

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 6

We do have the correct replacement for the Power Gear 524276, though it is a different part number than what you mentioned. Instead the correct replacement is the Replacement Gear Motor Assembly #LC368193.

view full answer...

Answer 7

The Pollak Connector PA66GF30 I believe is the same if not similar to the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket part #PK11893. If that is the case you can use the Mounting Bracket part #PK12711U and Curt No-Drill Bracket for…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Replacement Spring Bar for a Pro Series V-5 Hitch 113913 Weight Distribution System

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching