What Coupler Lock will Fit My Jayco Jayflight Trailer?

Question

Question:

Hello: I recently bought a hitch lock that indicated it would fit a Jayco Jayflight but the lock did not fit it was close. I have a 2022, Jayco Jayflight, 31. Can you help me find a hitch lock that will fit? Thanks for your help

asked by: Thomas R

0

Expert Reply:

For a lock that fits all three standard ball sizes, I recommend the Master Lock 1-7/8", 2", and 2-5/16" Trailer Coupler Lock # ML377KA.

expert reply by: Bob C

0

Answer 1

I'm not able to look up what style of coupler your 2008 Jayco 30 BHS has so to determine if the BlayLock Coupler lock part #BLTL-34 will fit will require you to verify that the coupler has a flat or rolled lip around the coupler that is not wider…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 4

Hello Jeremy, Yes, our etrailer jack #e55ZV will automatically stop and not over raise. If you check out the video that I attached you will see that Steven still has his finger pushing down the button after the jack stops. What kind of application…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since your 3,500 lb trailer axle leaf springs are flat and measure 26-1/8 inches the correct replacement would be the #e54SR which measures 25-1/8 inches.

view full answer...

Answer 7

Hey Scott, thanks for reaching out! The Timken Bearing Kit #TMK92VR you're looking at is for a 7K axle, and according to my research your 2021 Jayco Jay Flight SLX 195RB should be equipped with a 3.5K axle so we need to get you a different kit.…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What Coupler Lock will Fit My Jayco Jayflight Trailer?

Product Page this Question was Asked From

Continue Researching