Deka Battery Isolator Wiring From Main Battery

Question

Question:

The E connection, is this the new cable which you also can connect to the + side 15 of the ignition coil?

asked by: Peter V

0

Expert Reply:

The 'E' connection you are referring to on the Deka Battery Isolator # DW08771, is the connection made to any of your vehicle's high amperage remote turn on lead, or ignition wire. This connection will not go to your ignition coils positive number 15 terminal.

expert reply by: Bryce D

0

Battery Isolator Wiring Diagram
(click to enlarge)

Answer 1

You are correct when using the DEKA isolator part #DW08771 on a vehicle like yours you wouldn't use the E post.

view full answer...

Answer 2

For your battery isolator similar to #DW08771, you will have connection posts for each battery and for an alternator. The main battery will connect to position one and the alternator to the A post. The second battery will attach to the 2 via a…

view full answer...

Answer 3

The highest rated isolator that we offer is one like the Deka Battery Isolator, #DW08771, which has a capacity of 120 amps. From the information that I was able to gather on a 2014 Chevrolet Silverado it has an alternator with an amp rating greater…

view full answer...

Answer 4

You will need a battery isolator like the Deka #DW08770. This will install by running between your alternator and your truck's current battery. Then the second battery will run off the isolator as well. If you need a 120 amp isolator use…

view full answer...

Answer 5

When wiring up the Deka Battery Isolator #DW08771 the main/first battery will connect directly to position one on the isolator without the need for a circuit breaker. The second battery though should be attached to the second position on the isolator…

view full answer...

Answer 6

I've found a wiring diagram for the #DW08771 Battery Isolator. Terminal 1 would connect to the positive battery terminal of the main battery. The original wire from the alternator to the main battery would be removed from the battery and…

view full answer...

Answer 7

I've found a wiring diagram for the #DW08771 Battery Isolator. Terminal 1 would connect to the positive battery terminal of the main battery. The original wire from the alternator to the main battery would be removed from the battery and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Deka Battery Isolator Wiring From Main Battery

Product Page this Question was Asked From

Continue Researching