How to Determine Correct Replacement Electric Brakes For 2006 Fleetwood Prowler AX6
Question:
replace complete brake system on 2006 prowler regal AX6 what size would I need
asked by: Ken
Expert Reply:
We can tell you how to choose the correct replacement electric brakes for your 2006 Fleetwood Prowler AX6, though don't have a way of knowing the exact brakes you need. According to my research there are numerous models of the Regal AX6 series, with numerous different weights.
So in order to determine the electric brake assemblies that will fit your trailer, you need to know your axle's weight capacity, your mounting flange bolt pattern and the inside diameter and depth of your drum. However, based on the weights I saw it is likely you will need 12" x 2" electric brakes, though you will want to measure to be sure.
If your drum does measure 12" diameter x 2" wide and your axles are rated for between 5,200 lbs and 7,000 lbs, the correct brakes are the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA.
These fit a 4-bolt mounting flange that has bolt holes which measure 2-7/8" apart on center like Mounting Flange # 4-35 and require Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
If you do have a different measurement for your drum, I have added a link to our entire selection of electric brakes for you to come back to, or you can let me know your axle capacity, flange, and drum size and I will be happy to find the right parts for you.

Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- ABS Fasteners
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed To Add Brakes To Single Axle Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
- Q&A: Is There an Exact Replacement For a Tie Down 46250 Brake Caliper or What Option is There
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommendation for Adding Electric Trailer Brakes to Trailer with 3,500 lb Axles & 5 on 5 Inch Hubs
- Q&A: 4 Hole Brake Mounting Flange Dimensions for 10 Inch Brake Assembly
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Adding Brakes to 2022 Sport Haven AUT612D
- Article: Brake Controller Installation: Starting from Scratch
- Article: Adding Electric Over Hydraulic Disc Brakes