Recommending A No Drill Weight Distribution System for 1960s Airsteam Trailer

Question:

Well Hi, Im needing to tow a classic 1960s airstream, shes a beaut, to some shows but I will need a leveling system. Too much squat in the back. The tongue weight is around 700 lbs dry. I really dont want to drill or anything like that into this trailer. What do you have for me? I will need about a 4 inch d rop.

asked by: Barney F

Expert Reply:

When selecting a weight distribution system the primary issue that you first need to figure out is what the fully loaded and ready to tow tongue weight is of your rig. This would include any weight in the tow vehicle that is located behind the rear axle

The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW # EQ37100ET that you referenced in your question would be an ideal system for your 1960s Airstream. However, the Equal-i-zer model weight distribution and sway control has a maximum drop of 3" and may not work for your application.

I would recommend the Reese Steadi-Flex Weight Distribution System w/ Sway Control # RP66560. The Reese model has all the same options that the Equal-i-zer system. The Reese system offers optimum weight distribution and sway control for your tow vehicle and trailer. The Reese Steady- Flex, like the Equal-i-zer system, offers a no drill design. You will not have to drill in to the frame of your Airstream to install the system. The spring bars attach with clamp on brackets. However, the Reese Steady-Flex has a maximum drop of 4" and will function with your tow vehicle and trailer setup.

You will also need a trailer ball with a 1-1/4 diameter shank for the Reese system. I recommend # C40030.

I have attached an article that shows how to determine tongue weight and one on common questions on weight distribution and sway control.