Cushioned Trailer Hitch Ballmounts protect the towing vehicle driveline, hitch assembly and trailer contents by reducing the bangs and slams caused by starting, stopping and traveling over unpaved surfaces. Cushioned ballmounts act as a shock absorber and are also proven effective in reducing bounce and rhythmic vibrations.
Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle for 2" Hitches - 2 Tangs - 10,000 lbs
 |
Product Code: AMCC2
Product Price: $64.95
Product Weight: 13.00 pounds |
More Information and Pricing
Features:
- Functions as clevis hitch, pintle hitch or ball mount
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Constructed of powder coated steel with interior polyurethane cushion
- Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin (sold separately)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Back of receiver should be open - capped receivers may not be deep enough to accommodate shank length
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Ball hole/clevis pin hole diameter: 1"
- Distance between tangs: 2-1/2"
- Shank wall thickness: 1/4"
- Accepts most 3" lunette rings
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-C-C-2 Convert-A-Ball Cushioned Ball Mount / Clevis Hitch / Pintle Ring - Fits 2" Hitch - 10,000 lbs GTW
Convert-A-Ball Pintle Hook Combo with 3 Stainless Steel Balls - Bolt On - 10,000 lbs
 |
Product Code: PH1
Product Price: $189.95
Product Weight: 21.00 pounds |
More Information and Pricing
Features:
- Offers towing convenience and versatility
- Converts quickly and easily from pintle to standard ball mount - no tools needed
- Equipped with a double-engagement, rust-resistant locking system to secure lunette ring
- Bolts to standard pintle mounts, Convert-A-Ball cushioned mounts and reinforced bumpers on utility trucks
- Includes 3 interchangeable hitch balls, 1 pintle sleeve and mounting hardware
- Manufactured with stainless steel trailer hitch balls, shank and pintle sleeve on a black powder coated steel base
- Made in USA
Specs:
- Pintle hitch
- Works with lunette rings that have:
- Inner diameter: 3"
- Maximum outer diameter: 6-3/8"
- Maximum ring cross section: 1-5/8"
- Towing capacity: 25,000 lbs
- Tongue weight capacity: 5,000 lbs
- Ball hitch
- Ball shank diameter: 1"
- Ball sizes: 1-7/8", 2" and 2-5/16"
- Towing capacity for 2" and 2-5/16" hitch balls: 10,000 lbs
- Towing capacity for 1-7/8" hitch ball: 3,500 lbs
- Tongue weight capacity: 5,000 lbs
- 2-Year limited warranty
To use the unit as a pintle hitch, simply slip the stainless steel pintle sleeve over the 1" diameter hitch ball shank. Once in place, the sleeve accepts the lunette ring on the trailer, and the handle comes over and locks in place to create a strong, reliable pintle hitch with a towing capacity of 25,000 lbs. Backed up by the security of a double-locking system, this pintle hook combo offers safety, versatility and performance for those towing with a lunette ring.
To use the unit as a ball hitch, simply slip any size Convert-A-Ball stainless steel hitch ball onto the ball shank after the pintle sleeve has been removed. As a ball hitch, the PH1 maintains its strong performance, with a towing capacity up to 10,000 lbs.
Step by Step
To Install Pintle Sleeve:
First, remove manual safety pin. Next, pull out silver knob on lower, left-hand side of unit while lifting up on handle - this will disengage the pintle lock. Place the pintle sleeve over the ball shank. Now that both locks have been unlatched, you can rotate handle to a position directly above the pintle sleeve. Release silver knob, and handle's spring-loaded lock will snap down on sleeve, automatically engaging. Re-insert safety pin for extra security, and you're set to go.
To Remove Pintle Sleeve:
Remove safety pin, pull out silver knob and lift pintle handle while rotating it 90 degrees to the side. The handle will automatically snap into place in "self-parked" position. Last, remove sleeve and re-insert safety pin.
To Install Hitch Ball:
Remove the manual safety pin, move pintle handle to "self-park" position and double-check that it is fully engaged. Note: Do not try to latch the handle when using a ball coupler because this will interfere with and possibly damage the ball mount and coupler.
After re-installing safety pin, choose appropriate ball size. Locate dimple on ball's side and push integrated pin completely through ball. Place ball on ball mount shank, line up pin with shank hole, and push pin back through. Coupler will completely cover ball during travel, ensuring that pin cannot work loose. To remove, simply reverse the process.
This Convert-A-Ball pintle hook combo is certified V-5 by the THMA and meets SAE standard J-847.
PH-1 Convert-A-Ball Pintle-Hitch, 3 Ball Combo - Stainless Steel - Bolt-On - 3,500 to 10,000 lbs GTW
Convert-A-Ball Cushioned, 6-Way, Multi-Hitch Ball Mount for 2" Hitches - 10,000 lbs
 |
Product Code: CAB-6W
Product Price: $99.95
Product Weight: 18.00 pounds |
More Information and Pricing
Features:
- Easily switch between towing applications - simply remove ball mount from hitch and rotate
- Versatile, 6-option design - 3 ball sizes, as well as 3 other towing methods
- 1-7/8" Diameter hitch ball
- 2" Diameter hitch ball
- 2-5/16" Diameter hitch ball
- Clevis, lunette ring or spade
- Cushioned to protect your vehicle's driveline and hitch assembly, as well as your trailer's contents
- Acts as a shock absorber
- Reduces bounce and rhythmic vibrations
- Slides easily into 2" square trailer hitch receiver and attaches with 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity:
- For 2-5/16" ball and 7/8" draw pin
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- For 2" and 1-7/8" balls
- Towing capacity: 3,500 lbs
- Tongue weight capacity: 350 lbs
- Distance from center of hitch pin hole to closest edge of:
- Clevis hook: 3-1/2"
- 2-5/16" Ball: 5-1/4"
- 2" Ball: 5-1/2"
- 1-7/8" Ball: 5-3/4"
- Draw pin diameter: 7/8"
- Distance from center of hitch pin hole to end of ball mount, beyond the balls: 7-3/4"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
6W Convert-A-Ball Cushioned, 6-Way Multi-Hitch Ball Mount
Cushioned Ball Mount for 2" Hitches - 3/4" Rise - 2" Drop - 10,000 lbs
 |
Product Code: AMSC2
Product Price: $59.95
Product Weight: 9.13 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Constructed of powder coated steel with interior polyurethane cushion
- Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin (sold separately)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Drop: 2"
- Rise: 3/4"
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 9-1/2"
- Distance from center of hitch pin hole to end of shank: 5"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-SC-2 Convert-A-Ball Cushioned Ball Mount for 2" Square Receiver - 3/4" Rise or 2" Drop - 10,000 lbs GTW - 2,000 lbs TW
Cushioned Ball Mount for 2" Hitches - 2-3/4" Rise - 4" Drop - 10,000 lbs
 |
Product Code: AMSC4
Product Price: $61.95
Product Weight: 11.88 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Constructed of powder coated steel with interior polyurethane cushion
- Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin (sold separately)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Drop: 4"
- Rise: 2-3/4"
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 10"
- Distance from center of hitch pin hole to end of shank: 4-1/4"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-SC-4 Convert-A-Ball Cushioned Ball Mount for 2" Square Receiver - 2-3/4" Rise or 4" Drop - 10,000 lbs GTW - 2,000 lbs TW
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
 |
Product Code: AMSC6
Product Price: $62.95
Product Weight: 13.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Constructed of powder coated steel with interior polyurethane cushion
- Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin (sold separately)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Drop: 6"
- Rise: 4-3/4"
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 10-1/4"
- Distance from center of hitch pin hole to end of shank: 4"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-SC-6 Convert-A-Ball Cushioned Ball Mount for 2" Square Receiver - 4-3/4" Rise or 6" Drop - 10,000 lbs GTW - 2,000 lbs TW
Cushioned Ball Mount for 2" Hitches - 6-3/4" Rise - 8" Drop - 10,000 lbs
 |
Product Code: AMSC8
Product Price: $64.95
Product Weight: 14.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Constructed of powder coated steel with interior polyurethane cushion
- Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin (sold separately)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Drop: 8"
- Rise: 6-3/4"
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 11-1/2"
- Distance from center of hitch pin hole to end of shank: 4"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-SC-8 Convert-A-Ball Cushioned Ball Mount for 2" Square Receiver - 6-3/4" Rise or 8" Drop - 10,000 lbs GTW - 2,000 lbs TW
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9" Drop - 5,000 lbs
 |
Product Code: CAB-UM
Product Price: $99.95
Product Weight: 24.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Adjusts easily: moving hitch ball height up or down is as simple as removing and reinserting the pin
- Slides easily into 2" square trailer hitch receiver and attaches with 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 5,000 lbs
- Tongue weight capacity: 500 lbs
- Maximum rise: 8-1/2"
- Maximum drop: 9-1/2"
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 11"
- Adjusts by 1-1/2" increments
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
UM Convert-A-Ball Dual Cushioned Adjustable Ball Mount - Max Rise 7", Max Drop 9"
Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs
 |
Product Code: CG
Product Price: $174.95
Product Weight: 42.00 pounds |
More Information and Pricing
Features:
- Replaces standard gooseneck coupler - slides into existing 4" inner diameter tube on trailer
- Cushioned with polyurethane for 360 degrees of protection - plus up-and-down cushioning
- Acts as a shock absorber - less wear and tear on your equipment
- Reduces bounce and rhythmic vibrations to give you a safer, smoother ride
- Limits movement to a maximum of 3/4"
- Equipped with fail-safe, positive-lock feature to increase hitch-coupling safety
- Includes a steel extension handle that allows you to slide the bar to lock or unlock coupler from outside of the truck - no more crawling up into the truck bed to disengage coupler
- Can be locked in transit or when parked - padlock sold separately
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Application: standard gooseneck trailers
- Fits 2-5/16" gooseneck hitch balls
- Towing capacity: 30,000 lbs
- Tongue weight capacity: 2,000 lbs
- Tube diameter: 4"
- Tube height: 22"
- Overall height: 25.94"
- 2-Year limited warranty
Cutaway views showing the polyurethane cushions.
Using the convenient extension handle, you can slide the bar to lock or unlock the coupler while standing outside of the truck bed.
This Convert-A-Ball gooseneck coupler is certified V-5 by the THMA and meets SAE standard J-684.
CG Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - 30,000 lbs GTW
Convert-A-Ball Cushioned Pintle Mounting Bar for 2" Hitches - 4 Holes - 10,000 lbs
 |
Product Code: AMPC1
Product Price: $56.95
Product Weight: 9.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Installs easily
- Mount your pintle hitch to bar using (4) Grade-5, 1/2" bolts (pintle and bolts sold separately)
- Slide shank into 2" square trailer hitch receiver and attach with standard 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Works best with open-ended trailer hitches
- If used with a capped hitch, receiver tube must be at least 2-3/8" deep
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball pintle mounting bar meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-PC-1 Convert-A-Ball Cushioned Pintle Mounting Bar - Fits 2" Square Receiver
Convert-A-Ball Cushioned, Adjustable Pintle Mounting Bar for 2" Hitches - 10 Holes - 10,000 lbs
 |
Product Code: AMPC3
Product Price: $94.95
Product Weight: 13.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Provides rise or drop, depending on where pintle hitch is mounted on plate, to level your trailer
- Installs easily
- Mount your pintle hitch to bar using (4) Grade-5, 1/2" bolts (pintle and bolts sold separately)
- Slide shank into 2" square hitch receiver and attach with standard 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Works best with open-ended trailer hitches
- If used with a capped hitch, receiver tube must be at least 2-3/8" deep
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Distance from center of ball hole to center of hitch pin hole: 9-1/4"
- Hole spacing on mount plate:
- Left to right: 3-3/8" apart
- Top to bottom: 1-3/4" apart
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball pintle mounting bar meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-PC-3 Convert-A-Ball Adjustable, Cushioned Pintle Mounting Bar - 10 Hole
Convert-A-Ball Cushioned, Adjustable Pintle Mounting Bar for 2" Hitches - 8 Holes - 10,000 lbs
 |
Product Code: AMPC2
Product Price: $76.95
Product Weight: 12.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Provides rise or drop, depending on where pintle hitch is mounted on plate, to level your trailer
- Installs easily
- Mount your pintle hitch to bar using (4) Grade-5, 1/2" bolts (pintle and bolts sold separately)
- Slide shank into 2" square trailer hitch receiver and attach with standard 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Works best with open-ended trailer hitches
- If used with a capped hitch, receiver tube must be at least 2-3/8" deep
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Distance from center of hitch pin hole to back of mount plate: 5"
- Hole spacing on mount plate:
- Left to right: 3-3/8" apart
- Top to bottom: 1-3/4" apart
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball pintle mounting bar meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-PC-2 Convert-A-Ball Adjustable, Cushioned Pintle Mounting Bar - 8 Hole
Swinger Hitch Cushioned, Swiveling Ball Mount for 2" Hitches - 0" Drop - 10,000 lbs
 |
Product Code: CAB-SH
Product Price: $99.95
Product Weight: 16.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Swivels right and left, eliminating the need for bull's-eye backups
- Built with no drop - 0" drop measured from the top of the receiver tube
- Not designed to be used in the rise position
- Slides easily into 2" square trailer hitch receiver and attaches with 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,000 lbs
- Drop: 0"
- Cannot be reversed - must be used in upright position
- Swivel distance: 6" right or left
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 12-1/2"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
SH-0D Convert-A-Ball Cushioned Swinger Hitch Rotating Ball Mount - Zero Drop - 10,000 lbs GTW - 1,000 lbs TW
Convert-A-Ball Cushioned Pintle Hook Combo w/ 3 Nickel-Plated Balls - 2" Hitches - 16,000 lbs
 |
Product Code: PH2
Product Price: $174.95
Product Weight: 26.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Offers towing convenience and versatility
- Converts quickly and easily from pintle to standard ball mount - no tools needed
- Equipped with a double-engagement, rust-resistant locking system to secure lunette ring
- Slides easily into 2" square trailer hitch receiver and attaches with 5/8" hitch pin (sold separately)
- Includes 3 interchangeable hitch balls, 1 pintle sleeve and mounting hardware
- Manufactured with nickel-plated steel balls, shank and pintle sleeve on a black powder coated steel base
- Shank is constructed with interior polyurethane cushioning
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Pintle hitch
- Works with lunette rings that have:
- Inner diameter: 3"
- Maximum outer diameter: 6-3/8"
- Maximum ring cross section: 1-5/8"
- Towing capacity: 16,000 lbs
- Tongue weight capacity: 800 lbs
- Ball hitch
- Ball shank diameter: 1"
- Ball sizes: 1-7/8", 2" and 2-5/16"
- Towing capacity for 2" and 2-5/16" hitch balls: 8,000 lbs
- Towing capacity for 1-7/8" hitch ball: 3,500 lbs
- Tongue weight capacity: 800 lbs
- 2-Year limited warranty
To use the unit as a pintle hitch, simply slip the nickel-plated steel pintle sleeve over the 1" diameter hitch ball shank. Once in place, the sleeve accepts the lunette ring on the trailer, and the handle comes over and locks in place to create a strong, reliable pintle hitch with a towing capacity of 16,000 lbs. Backed up by the security of a double-locking system, this pintle hook combo offers safety, versatility and performance for those towing with a lunette ring.
To use the unit as a ball hitch, simply slip any size Convert-A-Ball nickel-plated steel hitch ball onto the ball shank after the pintle sleeve has been removed. As a ball hitch, the PH2 maintains its strong performance, with a towing capacity up to 8,000 lbs.
Step by Step
To Install Pintle Sleeve:
First, remove manual safety pin. Next, pull out silver knob on lower, left-hand side of unit while lifting up on handle - this will disengage the pintle lock. Place the pintle sleeve over the ball shank. Now that both locks have been unlatched, you can rotate handle to a position directly above the pintle sleeve. Release silver knob, and handle's spring-loaded lock will snap down on sleeve, automatically engaging. Re-insert safety pin for extra security, and you're set to go.
To Remove Pintle Sleeve:
Remove safety pin, pull out silver knob and lift pintle handle while rotating it 90 degrees to the side. The handle will automatically snap into place in "self-parked" position. Last, remove sleeve and re-insert safety pin.
To Install Hitch Ball:
Remove the manual safety pin, move pintle handle to "self-park" position and double-check that it is fully engaged. Note: Do not try to latch the handle when using a ball coupler because this will interfere with and possibly damage the ball mount and coupler.
After re-installing safety pin, choose appropriate ball size. Locate dimple on ball's side and push integrated pin completely through ball. Place ball on ball mount shank, line up pin with shank hole, and push pin back through. Coupler will completely cover ball during travel, ensuring that pin cannot work loose. To remove, simply reverse the process.
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball pintle hook combo is certified V-5 by the THMA and meets SAE standard J-847.
PH-2 Convert-A-Ball Cushioned Pintle Hitch with 3 Ball Set - Nickel Plated
Replaces Model PH2 with Chrome Plated 3 Ball Set
Convert-A-Ball Pintle Hook Combo with 3 Nickel Plated Steel Balls - 10,000 lbs
 |
Product Code: PH4
Product Price: $219.90
Product Weight: 27.00 pounds |
More Information and Pricing
Features:
- Offers towing convenience and versatility
- Converts quickly and easily from pintle to standard ball mount - no tools needed
- Equipped with a double-engagement, rust-resistant locking system to secure lunette ring
- Installs easily onto cushioned weight-distributing shank (AMAC1; sold separately)
- Will not work with other weight-distribution shanks
- Includes 3 interchangeable hitch balls, 1 pintle sleeve and mounting hardware
- Manufactured with nickel-plated steel trailer hitch balls, shank and pintle sleeve on black powder coated steel base and mounting plate
- Made in USA
Specs:
- Fits Convert-A-Ball cushioned weight-distribution shank (AMAC1; sold separately)
- Will not fit other weight-distributing shanks
- Pintle hitch
- Works with lunette rings having:
- Inner diameter: 3"
- Maximum outer diameter: 6-3/8"
- Maximum ring cross section: 1-5/8"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,000 lbs
- Ball hitch
- Ball shank diameter: 1"
- Ball sizes: 1-7/8", 2" and 2-5/16"
- Towing capacity for 2" and 2-5/16" hitch balls: 10,000 lbs
- Towing capacity for 1-7/8" hitch ball: 3,500 lbs
- 2-Year limited warranty
To use the unit as a pintle hitch, simply slip the nickel-plated steel pintle sleeve over the 1" diameter hitch ball shank. Once in place, the sleeve accepts the lunette ring on the trailer, and the handle comes over and locks in place to create a strong, reliable pintle hitch with a towing capacity of up to 10,000 lbs. Backed up by the security of a double-locking system, this pintle hook combo offers safety, versatility and performance for those towing with a lunette ring.
To use the unit as a ball hitch, simply slip any size Convert-A-Ball nickel-plated steel hitch ball onto the ball shank after the pintle sleeve has been removed. As a ball hitch, the PH4 maintains its strong performance, with a towing capacity up to 10,000 lbs.
Step by Step
To Install Pintle Sleeve:
First, remove manual safety pin. Next, pull out silver knob on lower, left-hand side of unit while lifting up on handle - this will disengage the pintle lock. Place the pintle sleeve over the ball shank. Now that both locks have been unlatched, you can rotate handle to a position directly above the pintle sleeve. Release silver knob, and handle's spring-loaded lock will snap down on sleeve, automatically engaging. Re-insert safety pin for extra security, and you're set to go.
To Remove Pintle Sleeve:
Remove safety pin, pull out silver knob and lift pintle handle while rotating it 90 degrees to the side. The handle will automatically snap into place in "self-parked" position. Last, remove sleeve and re-insert safety pin.
To Install Hitch Ball:
Remove the manual safety pin, move pintle handle to "self-park" position and double-check that it is fully engaged. Note: Do not try to latch the handle when using a ball coupler because this will interfere with and possibly damage the ball mount and coupler.
After re-installing safety pin, choose appropriate ball size. Locate dimple on ball's side and push integrated pin completely through ball. Place ball on ball mount shank, line up pin with shank hole, and push pin back through. Coupler will completely cover ball during travel, ensuring that pin cannot work loose. To remove, simply reverse the process.
This Convert-A-Ball pintle hook combo is certified V-5 by the THMA and meets SAE standard J-847.
PH-1 and PA-1 Convert-A-Ball Pintle Hook for Adjustable Ball Mount with Nickel-Plated Steel Hitch Ball Set (for AMAC1)
Cushioned Class II Drawbar for 1-1/4" OEM Hitches - 3/4" Rise - 1" Drop - 3,500 lbs
 |
Product Code: AMC1
Product Price: $52.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Constructed of powder coated steel with interior polyurethane cushion
- Slides into Class II, OEM trailer hitch receiver and attaches with 1/2" hitch pin (sold separately)
- Made in USA
Specs:
- Fits 1-1/4" x 1-1/4" trailer hitch receivers (Class II OEM only)
- Towing capacity: 3,500 lbs
- Tongue weight capacity: 300 lbs
- Drop: 1"
- Rise: 3/4"
- Ball hole diameter: 3/4"
- Distance from center of ball hole to center of hitch pin hole: 7-1/8"
- Distance from center of hitch pin hole to end of shank: 2-3/4"
- 2-Year limited warranty
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball drawbar meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
A-M-C-1 Convert-A-Ball Cushioned Ball Mount for 1-1/4" x 1-1/4" Square Hitch Receiver - Class II OEM - 3,500 lbs GTW
Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
 |
Product Code: AMAC1
Product Price: $94.95
Product Weight: 16.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Allows for up-and-down adjustment of weight-distribution head (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Works with Reese, Draw-Tite and Valley weight-distribution systems - round bar or trunnion bar
- Compatible with the following Convert-A-Ball accessories (sold separately):
- Pintle hook combo with balls (PH4)
- Ball mount adapter (BA-1)
- Clevis pin adapter (CA-1)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Attaches with 5/8" hitch pin (sold separately)
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Vertical shank:
- 9-1/2" Long
- 2" Square
- 1/4" Thick walls
- 1-1/4" From center to center of holes
- Round-bar weight-distribution system
- Trunnion-bar weight-distribution system
- Measures 6-3/4" from center pin hole to hitch pin hole
- 2-Year limited warranty
Drop/Rise Ranges for AMAC1
This weight-distribution shank can be used to adjust the rise or drop of your weight-distribution head when leveling your trailer and tow vehicle. The actual drop or rise range will vary with the style of weight-distribution system used.
When used with round-bar weight-distribution system:
Maximum drop: 3-3/8"
Maximum rise: 6-5/8"
Distance from center of hitch pin hole to center of ball hole: 11-1/2"
When used with trunnion-bar weight-distribution system:
Maximum drop: 2-5/8"
Maximum rise: 7-3/8"
Distance from center of hitch pin hole to center of ball hole: 10-7/8"
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball weight-distributing shank meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-A-C-1 Convert-A-Ball Cushioned Weight-Distributing, Drop/Rise Shank - 10,000 lbs GTW
Tow Ready Cushioned Ball Mount - 3/4" Rise or 2" Drop
 |
Product Code: TR80420
Product Price: $68.95
Product Weight: 8.50 pounds |
More Information and Pricing
Class IV Cushioned Ball Mount from Tow Ready
- Features 2 heavy-duty, polyurethane cushions in ball Mount shank
- Allows the pin hole to "float"
- Reduces slams and bangs associated with starting, stopping and rough roads
- Provides protection for the towing vehicle's driveline, hitch assembly and trailer contents
- Fits 2" x 2" trailer hitches
- Gives a 3/4" rise or 2" drop from top of your hitch's receiver tube opening
- Measures 9-3/8" from center of ball hole to center of hitch pin hole
- Capacity: 10,000 lbs GTW | 1,000 lbs TW
- Ball hole: 1" diameter
80420 Tow Ready Cushioned Ball Mount by Draw-tite, Hidden Hitch and Reese
Tow Ready Cushioned Ball Mount - 2-3/4" Rise or 4" Drop
 |
Product Code: TR80421
Product Price: $70.95
Product Weight: 10.00 pounds |
More Information and Pricing
Class IV Cushioned Ball Mount from Tow Ready
- Features two heavy duty polyurethane cushions in ball mount shank
- Allows the pin hole to "float"
- Reduces slams and bangs associated with starting, stopping and rough roads
- Provides protection for the towing vehicle's driveline, hitch assembly and trailer contents
- Fits 2" x 2" trailer hitches
- Gives a 2-3/4" rise or 4" drop from the top of your hitch's receiver tube opening
- Measures 9-7/8" from the center of the ball hole to the center of the hitch pin hole
- Capacity: 10,000 lbs GTW | 1,000 lbs TW
- Ball hole: 1" diameter
80421 Tow Ready Cushioned Ball Mount by Draw-tite, Hidden Hitch and Reese
Cushioned Ball Mount - 4-3/4" Rise or 6" Drop
 |
Product Code: TR80422
Product Price: $74.95
Product Weight: 11.00 pounds |
More Information and Pricing
Class IV Cushioned Ball Mount from Tow Ready
- Features 2 heavy-duty, polyurethane cushions in ball mount shank
- Allows the pin hole to "float"
- Reduces slams and bangs associated with starting, stopping and rough roads
- Provides protection for the towing vehicle's driveline, hitch assembly and trailer contents
- Fits 2" x 2" trailer hitches
- Gives a 4-3/4" rise or 6" drop from top of your hitch's receiver tube opening
- Measures 10-5/8" from center of the ball hole to center of hitch pin hole
- Capacity: 10,000 lbs GTW | 1,000 lbs TW
- Ball hole: 1" diameter
80422 Tow Ready Cushioned Ball Mount by Draw-tite, Hidden Hitch and Reese
Roll-A-Hitch Cushioned, Telescoping/Swiveling Ball Mount - 2" Drop - 10,000 lbs
 |
Product Code: CAB-LD2
Product Price: $214.95
Product Weight: 40.00 pounds |
More Information and Pricing
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Telescopes out an extra 7" to reach your coupler for easy, 1-person hookup
- Pull ball mount forward to lock in center position
- Push back into place to lock in towing position
- Swivels right and left, eliminating the need for bull's-eye backups
- Provides a 2" drop - measured from the top of the receiver tube
- Not designed to be used in rise position
- Slides easily into 2" square trailer hitch receiver and attaches with 5/8" hitch pin (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,000 lbs
- Drop: 2"
- Cannot be reversed - must be used in the drop position
- Swivel distance: 6" right or left
- Extension length: 7" straight out
- Ball hole diameter: 1"
- Distance from center of ball hole to center of hitch pin hole: 15" (21-1/2" extended)
- 2-Year limited warranty
The unique Roll-A-Hitch swivels six inches to the right or to the left and also extends an extra seven inches in length for easier trailer hookups.
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball ball mount meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
LD2 Convert-A-Ball Cushioned Roll-A-Hitch Telescoping and Swinging Ball Mount - 2" Drop - 10,000 lbs GTW - 1,000 lbs TW
Replaces Model LR-2, CAB-LR2
