Product Code: 3280 Product Price: $64.95 Product Weight: 13.00 pounds

Draw-Tite Pole Tongue Adapter

A Pole Tongue Adapter is used as a mounting platform for the hook-up brackets of a weight-distributing hitch system when a trailer has a pole or straight tongue rather than an A-frame tongue.

• Fits Tongue Widths from 1-5/8" to 5"
• Fits Tongue Heights from 3" to 6"
• Fits All Lift Units Regardless of Manufacturer
  • Will not work with Pro Series SC or Reese SC weight distribution systems

Product Code: 58306 Product Price: $44.95 Product Weight: 4.00 pounds

Weight Distribution Clamp On Chain Hanger Kit by Draw-Tite, Hidden Hitch and Reese

Chain hanger kit simply clamps around trailer frame and is only 2" wide. To tighten chains simply raise the trailer tongue and rear of vehicle with the trailer jack.

• No drilling required
• Includes two (2) brackets - one for each side of trailer tongue
• Includes hardware
• Fits 4", 5" and 6" tall trailer frames
• Width of trailer frame cannot exceed 2-1/4" wide
• Chain hanger brackets measure 2" wide

Note: From the center of the chain hangers to the center of the coupler ball should measure approximately 31"

Product Code: 58305 Product Price: $39.95 Product Weight: 5.00 pounds

Weight Distribution Bolt On Chain Hanger Kit by Draw-Tite, Hidden Hitch and Reese

Chain hanger kit bolts on to the side of trailer frame leaving more room for other equipment on top of the trailer tongue. To tighten chains simply raise the trailer tongue and rear of vehicle with the trailer jack.

• Drilling required
• Includes two (2) brackets - one for each side of trailer tongue
• Includes hardware to mount brackets on C-channel or tube trailer frames
  • Width of trailer frame cannot exceed 2-1/4" wide
• Chain hanger brackets measures 5" wide x 3-5/16" tall
• Mounting holes are 3" a part center to center

Note: From the center of the chain hangers to the center of the coupler ball should measure approximately 31"

Product Code: TR3360 Product Price: $99.95 Product Weight: 29.00 pounds

Weight Distribution Pole Tongue Adapter by Draw-Tite, Hidden Hitch and Reese

The adapter clamps around straight tongue trailers to provide an attachment point for weight distribution spring bars.

• Trailer frame must have a minimum width of 2" and cannot exceed 4"
• Trailer frame must have a minimum height of 3" and cannot exceed 7"
• Capacity: 14,000 lbs. GTW / 1,400 lbs. TW
• Can be used with Round, Trunnion, Pro Series SC, and Reese SC style weight distribution systems