800 - 1,500 lbs Tongue Weight

Product Code: 66131 Product Price: $349.95 Product Weight: 75.00 pounds

High Performance Weight Distribution System with a raised hitch ball platform with serrated washer tilt design by Draw-Tite, Hidden Hitch and Reese

• Designed for Tongue Weights Between 1,000 - 1,500 lbs.
• Maximum Towing Weight: 15,000 lbs.
• Raised Hitch Ball Platform Eliminates the Need for Raised Hitch Balls
• Spring Bars Include an Integrated Cam for Easy Set-up with the Reese Dual Cam Sway Control (26000, 26001 and 26002)
• Serrated Washers Make it Easier to Dial in the Set-up of the High Performance Weight Distribution Kit
• Serrated washers help control the tilt or angle of the weight distribution head. Other styles of weight distribution use harder to access washers.

Strait-Line Hitch 1500 is a combination of the Reese trunnion style weight distribution system (66131) and the Dual Cam High-Performance Sway Control (26002).

The Strait-Line Hitch was given this name as its pro-active design literally forces the trailer to stay in a straight line behind the tow vehicle. Sway is controlled by the Dual Cam High-Performance System. The stronger the sway force, the more the Dual Cam System works to stop it.

The Strait-Line Hitch combines weight distributing with the best proven pro-active sway control system available in a newly-designed, easy to install kit.

• 66131 - Designed for Tongue Weights Between 1,000-1,500 lbs. / Maximum Trailer Weight 15,000 lbs.
• Simple installation and adjustment
• Fully automatic and self-centering
• Hooking up spring bars automatically hooks up sway control
• Reduced Noise
• No U-bolts to conflict with bottle racks or other A-frame mounted items
• Specific attachment reference points provided
• Note: Weight Distributing Shank and Trailer Hitch Ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

Manufactured by Draw-Tite, Hidden Hitch and Reese

Product Code: 66158 Product Price: $374.95 Product Weight: 80.00 pounds

Reese SC Trunnion Weight Distribution Kit with Sway Control 1,500 lbs TW / 15,000 lbs GTW

Six points of friction control trailer sway. Four points of steel-on-steel friction are found in the weight distribution head, with the two most important points of friction located along the weight distribution spring bars. The tapered spring bars are attached to the trailer frame with a hanger system that provides a platform for the spring bar to rest on. These large platforms are composed of an automotive friction material (as found in car brakes) that creates 10 times the amount of friction force as compared with steel-on-steel friction. When installed properly, the spring bars are constantly exerting force down onto the platforms (this downward force is what distributes the weight). When the trailer comes out of a straight line for turns, the spring bars slide along the top of the large friction pad. Turns exert enough force to slide the spring bars over the friction pad; however, gusts of wind not.

This system is the same as the Pro Series SC; however it uses tapered spring bars. Tapered bars provide superior weight distribution performance over uneven roads and in various weather conditions while also putting less strain on the vehicle.

Features:

• 6 Points of friction to control trailer sway
  • 4 Steel-on-steel points in the weight distribution head
  • 2 Large friction pads hang from trailer frame
• Tapered bars provide superior weight distribution on uneven roads and in many different weather conditions
• Lift handle accessory included to reduce the amount of lifting required by the trailer jack when the weight distribution system is preloaded
• Automotive friction material provides consistent friction in all weather conditions
• Large friction pads make full contact with the spring bars, yielding a longer life and more consistent performance
• Serrated washers make it easy to dial in the setup of the weight distribution system
  • Serrated washers help to control the tilt or angle of the weight distribution head
• Raised hitch ball platform eliminates the need for hitch balls with raised shanks
• No-drill, clamp-on brackets can be installed within a wide range to accommodate gas bottles, batteries, tool boxes etc. on the trailer tongue

Specs:

• Designed for a tongue weight 800 lbs - 1,500 lbs
• Provides maximum towing weight: 15,000 lbs
• Features hangers with friction pads that clamp onto trailer frame without any drilling
  • Hangers can be adjusted from 28" to 30" back from the center of the ball along the trailer frame
  • Adjustments can vary by weight rating
• Works well on trailers with hydraulic (surge) brake actuators
• Made in the USA
• Limited lifetime warranty

Note: Weight distribution shank and trailer hitch ball are sold separately. Hitch ball requires 1-1/4" shank to maximize towing capacity.

66158 Reese SC Weight Distributing 1500 System with Built-In Dependent Friction Sway Control