RoadMaster High-Low Drop - 4" - 6,000 lbs GTW; 100 lbs TW
 |
Product Code: RM-070
Product Price: $54.95
Product Weight: 13.00 pounds |
More Information and Pricing
Features:
- Allows for proper positioning of tow bar
- Provides either drop or rise for adequate ground clearance
- Designed for use with tow bar only - do not use with any type of trailer
- Can be used in the rise or drop position
- Made in the USA
Specs:
- Drop/rise: 4"
- Receiver: 2" x 2"
- Tongue weight: 100 lbs
- Gross towing weight: 6,000 lbs
Most tow systems require some sort of hitch accessory to either raise or lower the tow bar to an appropriate level. The "Safe Zone" for a motor-home-mounted tow bar ranges from 3" above level to 4" below. Car-mounted models must be absolutely level. RoadMaster's High-Low Drops will provide you with the necessary drop; simply flip the accessory over to achieve desired rise.
070 RoadMaster 4" High-Low Drop
RoadMaster High-Low Drop - 6" - 6,000 lbs GTW; 100 lbs TW
 |
Product Code: RM-076
Product Price: $54.95
Product Weight: 15.00 pounds |
More Information and Pricing
Features:
- Allows for proper positioning of tow bar
- Provides either drop or rise for adequate ground clearance
- Designed for use with tow bar only - do not use with any type of trailer
- Can be used in the rise or drop position
- Made in the USA
Specs:
- Drop/rise: 6"
- Receiver: 2" x 2"
- Tongue weight: 100 lbs
- Gross towing weight: 6,000 lbs
Most tow systems require some sort of hitch accessory to either raise or lower the tow bar to an appropriate level. The "Safe Zone" for a motor-home-mounted tow bar ranges from 3" above level to 4" below. Car-mounted models must be absolutely level. RoadMaster's High-Low Drops will provide you with the necessary drop; simply flip the accessory over to achieve desired rise.
076 RoadMaster 6" High-Low Drop
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
 |
Product Code: HTAD
Product Price: $39.95
Product Weight: 7.00 pounds |
More Information and Pricing
This adapter allows you to use your current hitch accessories in either a 2" or a 1-1/4" receiver hitch.
Features:
- Convert any 1-1/4" (Class I and II) receiver to a 2" receiver (not to be used for towing or with snow plows)
- Has powder coated black finish
Specs:
- Capacity: 300 lbs tongue weight
- Note: Tongue weight capacity of hitch will be reduced by 50% with use of adapter
- Measures 7-1/4" from pin hole to pin hole
- Hitch accessory (bike rack, etc.) cannot be more than 3-3/8" long from the center of the hitch pin hole to the end of the shank (part that slides into the hitch)
- Requires hitch pins and clips (sold separately)
- Requires 5/8" pin for 2" receiver (PC3)
- Requires 1/2" pin for 1-1/4" receiver (PC2)
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
 |
Product Code: 80303
Product Price: $42.95
Product Weight: 7.00 pounds |
More Information and Pricing
This adapter allows you to use your current hitch accessories in either a 2" or an 1-1/4" receiver hitch. This adapter is not to be used for towing.
- Convert any class II 1-1/4" receiver to a 2" receiver
- will not fit class I 1-1/4" receiver
- Has black painted finish
- Measures 6" long from pin hole to pin hole
- Maximum Tongue Weight - 50 percent of the tongue weight shown on the rating sticker of your trailer hitch
- Note: shank of hitch accessory (bike rack, etc.) cannot be more than 2-3/4" long from the center of the hitch pin hole to the end of the shank (end that slides into the hitch)
- Requires hitch pins and clips, sold separately
- Requires 5/8" pin for 2" receiver (PC3)
- Requires 1/2" pin for 1-1/4" receiver (PC2)
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
 |
Product Code: HT02
Product Price: $39.95
Product Weight: 4.00 pounds |
More Information and Pricing
This adapter allows you to use your current hitch accessories in either a 2" or a 1-1/4" receiver hitch.
- Easily convert a 2" receiver to 1-1/4" (1/2" hitch pin included)
- Maximum Tongue Weight: 300 lbs
- Towing capacity: 3,000 lbs or the lowest-rated towing component
- Sleeve design does not reduce tongue weight capacity
- Measures 3" from center of pin hole to center of pin hole
- Powder coated black finish
- Conveniently includes 1/2" pin and clip to hold 1-1/4" accessories in place
- 5/8" Hitch pin and clip for 2" receiver are sold separately (PC3)
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver
 |
Product Code: 80300
Product Price: $57.95
Product Weight: 5.00 pounds |
More Information and Pricing
This adapter allows you to use your current hitch accessories in either a 2" or a 1-1/4" receiver hitch.
- Easily converts 2" receiver to 1-1/4"
- Hitch pins and clips sold separately
- Requires 5/8" pin for 2" receiver (PC3)
- Requires 1/2" pin for 1-1/4" receiver (PC2)
- Has black painted finish
- Measures 7" from pin hole to pin hole
- Has Maximum Trailer Weight that is the lower of the following
- 50 Percent of the towing capacity shown on the rating sticker of your trailer hitch
- Vehicle towing capacity, per your owner's manual
- 3,500 lbs
- Has Maximum Tongue Weight that is the lower of the following
- 50 Percent of the tongue weight shown on the rating sticker of your trailer hitch
- 300 lbs
Hitch Adapter, 1-1/4" to 2" - 10" Long
 |
Product Code: 80304
Product Price: $47.95
Product Weight: 8.00 pounds |
More Information and Pricing
This adapter allows you to use your current hitch accessories in either a 2" or an 1-1/4" receiver hitch. This adapter is not to be used for towing.
- Convert any Class II 1-1/4" receiver to a 2" receiver
- will not fit Class I 1-1/4" receiver
- Black painted finish
- 10" long from pin hole to pin hole
- Maximum trailer weight is the lowest of the following
- 50% of the towing capacity shown on the rating sticker of your trailer hitch
- Vehicle towing capacity, per your owner's manual
- Maximum tongue weight is the lowest of the following
- 50% of the tongue weight shown on the rating sticker of your trailer hitch
Reese Titan Reducer Sleeve 2-1/2" to 2"
 |
Product Code: 58102
Product Price: $20.95
Product Weight: 4.00 pounds |
More Information and Pricing
- Adapts a 2-1/2" x 2-1/2" hitch receiver opening into a 2" x 2"
- Works with factory-installed and after-market trailer hitches with a 2-1/2" square receiver opening
- to use with 2011 Ford Super Duty pickups - modification may be required
- Allows you to use your 2" towing and hitch-mounted accessories
Bushing reduces Titan receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2")
Note: Ford OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM Ford 2-1/2 inch hitch, the corners of a ball mount, shank or reducer sleeve may need to be sanded down to slide into the hitch. Do not remove any more material than necessary. Simply removing the paint or powder-coat is often sufficient. Never use a grinder to knock-down the corners, which may remove too much material and will also heat the accessory and could compromise the product's structural integrity. This is especially the case with cast accessories like larger weight distribution shanks.
58102 Reese Titan Hitch Adapter
Valley Trailer Hitch Ball mount with 2" Receiver for Bike Racks or Cargo Carriers
 |
Product Code: V75090
Product Price: $54.95
Product Weight: 15.00 pounds |
More Information and Pricing
Valley Multi-Purpose Trailer Hitch Ball Mount
This ball mount is designed to tow and carry accessories such as bike racks or cargo carriers at the same time.
- Capacity: 5,000 lbs GTW / 500 lbs TW
- Do not exceed 500 lbs including the weight of the bike rack or cargo carrier
- Requirement: trailer hitch ball with a 1" shank diameter
- Ball mount
- Provides a 3-1/2" drop from the top of the 2" trailer hitch opening (on the vehicle) to the top of the ball platform
- Measures 12-1/2" from the center of the hitch pin hole to the center of the ball hole
- 2" Receiver opening
- Provides 7-1/2" extension from center of hitch pin hole to center of hitch pin hole
- Provides 6" rise
Adapter Sleeve with Hitch Lock for Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers
 |
Product Code: DTADP35
Product Price: $32.95
Product Weight: 4.00 pounds |
More Information and Pricing
Note: Some 2-1/2" receivers are too wide for the included lock. Draw-Tite and Reese brand Titan hitches with an 18,000 lb. towing capacity and 2010 or newer GM HD 2-1/2" receivers are too wide for this lock. The lock will not fit these receivers.
Features:
- Designed to let your Diversi-Tech DTLBM and DTALBM ball mounts fit into 2-1/2" receivers
- Includes two sets of hitch pin holes
- One set lines up with the locking pins of the Diversi-Tech ball mount
- One set lines up with the hitch pin holes in the 2-1/2" receiver
- Includes long span hitch lock
- Tube-style lock prevents theft, keeping the things that you attach to your hitch on your hitch
- Long span fits 2-1/2" receivers
- Chrome-plated steel construction ensures that your lock will look good for a long time
- Easy-to-use design requires only a quarter-turn of the key to lock or unlock
- Tube key lock cylinder provides better security than standard key mechanisms
- Harder to pick
- More difficult to duplicate keys
- Water-tight cap keeps water out of the lock to prevent corrosion
- High strength ball interlock design prevents false locking
- Includes 2 keys
- Made in the USA
Specs:
- Applications: 2" Diversi-Tech locking ball mounts to 2-1/2" hitch receivers
- Overall length: 5-3/4"
- Overall width: 2-1/2"
- Inside width: 2-1/8"
- 1-Year limited warranty
DT-ADP35 Diversi-Tech Reducer Sleeve with Lock for 2" x 2" Ball Mounts to 2-1/2" x 2-1/2" Hitch Receivers
Softride Hitch Adapter for 2" Receivers - 4" Rise
 |
Product Code: SR25748
Product Price: $53.99
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Powder coated steel construction and robotic welding
- Optional anti-rattle hitch bolt and lock offer reliable security (SR25056 sold separately)
Specs:
- Fit: 2" hitch accessories and 2" hitches
- Rise: 4" from the top of the hitch receiver tube to the top of the hitch adapter
- Distance from the center of the hitch pin hole to the back of the upright bar is: 5-1/2" or 8"
Note: Do not use for towing. Designed specifically for use with Softride bike racks. Cannot be used with cargo carriers.
This convenient adapter raises 2" hitch accessories 4" above a vehicle's receiver tube, eliminating the threat of low clearance. An anti-rattle hitch bolt (sold separately: #SR25056) locks it into a 2" receiver tube to guard against theft. Powder coated steel construction and robotic welding give this adapter a long-lasting quality.
25748 Softride Gooseneck Hi-Lo Hitch Adapter
2" Hitch Adapter for Rola or Highland 1-1/4" Bike Racks
 |
Product Code: 1370300
Product Price: $12.95
Product Weight: 3.00 pounds |
More Information and Pricing
Features:
- Converts a Highland and Rola 1-1/4" bike carrier into a 2" model
- Attaches in seconds with included hardware
Specs:
- Application: Highland and Rola bike racks with 1-1/4" shanks
- 1-Year limited warranty
1370300 2" Hitch Adapter for Rola Bike Racks
