Ballmounts
Ballmounts are available for any trailer hitch size, from chrome to camouflaged, from powder coated to stainless steel. Some are available with an adjustable platform and others with all three hitch balls already welded in place. However when selecting your ballmount, be sure to match the weight capacity and ball height with that of your trailer. For more information, a faq page on finding the correct ballmount is available for reference.
| Picture |
 Part
Number |
Drop |
Rise |
Length |
Gross Towing
Weight (in lbs.) |
Tongue
Weight (in lbs.) |
Ball
Shank Size |
Finish |
 |
2923 |
2" |
3/4" |
8-1/2" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
2736 |
2" |
3/4" |
12" |
5,000 |
500 |
1" |
Black Powder Coated |
 |
80232 |
2" |
3/4" |
16" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
40330 |
2" |
1" |
8-1/2" |
10,000 |
1,000 |
1-1/4" |
Double Black Powder Coated |
 |
V77010 |
2" |
1" |
9-1/2" |
8,000 |
800 |
1" |
Aluminum |
 |
CR-701 |
2" |
3/4" |
7-3/4" |
6,000 |
600 |
1" |
Stainless Steel |
 |
4280 |
2" |
1" |
8-1/2" |
12,000 |
1,200 |
1-1/4" |
Zinc Coated |
 |
CR-702 |
3" |
1-3/4" |
9-1/8" |
6,000 |
600 |
1" |
Stainless Steel |
 |
2753 |
4" |
2-3/4" |
8-1/2" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
80205 |
6" |
4-3/4" |
10" |
5,000 |
500 |
1" |
Chrome |
 |
2793 |
8" |
6-3/4" |
10" |
5,000 |
500 |
1" |
Black Powder Coated |
 |
BM-10 |
10" |
N/A |
10-1/2" |
5,000 |
500 |
1" |
Black Powder Coated |
 |
80228 |
4" |
2-3/4" |
11-1/4" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
80233 |
4" |
2-3/4" |
16" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
40384 |
8" |
7" |
10-7/8" |
6,000 |
600 |
1" |
Aluminum |
 |
3482AT |
2" |
3/4" |
8-7/8" |
6,000 |
600 |
1" |
Nickel with Chrome Plating |
 |
3483AT |
2" |
3/4" |
8-7/8" |
6,000 |
600 |
1" |
Nickel with Chrome Plating |
 |
3481AT |
2" |
3/4" |
8-7/8" |
6,000 |
600 |
1" |
Nickel with Chrome Plating |
 |
3479AT |
2" |
3/4" |
8-7/8" |
6,000 |
600 |
1" |
Nickel with Chrome Plating |
 |
3489AT |
2" |
3/4" |
10" |
6,000 |
600 |
1" |
Nickel with Chrome Plating |
 |
3490AT |
2" |
3/4" |
10-1/2" |
6,000 |
600 |
1" |
Nickel with Chrome Plating |
 |
D-28 |
6" |
4" |
12" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
80240 |
6" |
4-3/4" |
9-3/4" |
6,000 |
600 |
1" |
Black Powder Coated |
 |
40383 |
6" |
5" |
11-7/8" |
8,000 |
800 |
1" |
Aluminum |
 |
40382 |
4" |
3" |
10-5/8" |
8,000 |
800 |
1" |
Aluminum |
 |
40331 |
4" |
3" |
9-1/4" |
10,000 |
1,000 |
1-1/4" |
Double Black Powder Coated |
 |
40332 |
6" |
5" |
10-1/4" |
10,000 |
1,000 |
1-1/4" |
Double Black Powder Coated |
 |
4282 |
6" |
5" |
9-1/2" |
12,000 |
1,200 |
1-1/4" |
Zinc Coated |
 |
4281 |
4" |
3" |
8-1/2" |
12,000 |
1,200 |
1-1/4" |
Zinc Coated |
 |
4284 |
2" |
1" |
12" |
12,000 |
1,200 |
1-1/4" |
Zinc Coated |
|
4285 |
4" |
3" |
12" |
12,000 |
1,200 |
1-1/4" |
Zinc Coated |
 |
4283 |
8" |
7" |
9-1/2" |
12,000 |
1,200 |
1-1/4" |
Zinc Coated |
|
80205 |
6" |
4-3/4" |
10" |
5,000 |
500 |
1" |
Chrome |
|
80203 |
8" |
6-3/4" |
10" |
5,000 |
500 |
1" |
Chrome |
|
80207 |
2" |
3/4" |
8-1/2" |
6,000 |
600 |
1" |
Chrome |
|
80209 |
4" |
2-3/4" |
10" |
5,000 |
500 |
1" |
Chrome |
|
80210 |
2-1/2" |
1-1/2" |
10" |
5,000 |
500 |
1" |
Chrome |
1-7/8" (Drop) and 2" (Rise) Reversible Ball Mount
 |
Product Code: D-43
Product Price: $38.95
Product Weight: 11.00 pounds |
More Information and Pricing
- 1-7/8" (drop - 2") and 2" (rise - 3/4") Reversible ball mount
- Black painted
- Fits 2" x 2" receiver hitches
- Measures 11" from the center of the hitch pin hole to the center of the ball
- 600 lbs TW
- Towing capacity depends on the weight capacity of ball
- 3,500 lbs for 1-7/8" ball
- 6,000 lbs for 2" ball
Class III (2" x 2") ball mount accessories
1-7/8" (Rise) and 2" (Drop) Reversible Ball Mount
 |
Product Code: 80404
Product Price: $48.14
Product Weight: 11.00 pounds |
More Information and Pricing
- 1-7/8" (rise - 3/4") and 2" (drop - 2") Reversible ball mount
- Black painted
- Fits 2" x 2" receiver hitches
- 500 lbs TW
- Towing capacity depends on the weight capacity of the ball
Class III (2" x 2") ball mount accessories
2" (Drop) and 2-5/16" (Rise) Reversible Ball Mount
 |
Product Code: D-44
Product Price: $44.95
Product Weight: 13.00 pounds |
More Information and Pricing
- 2" (drop - 2") and 2-5/16" (rise - 3/4") Reversible ball mount
- Black painted
- Fits 2" x 2" receiver hitches
- 500 lbs TW
- Towing capacity depends on the weight capacity of the ball
Class III (2" x 2") ball mount accessories
Ball Mount 1" Rise or 2" Drop, 12,000 lbs
 |
Product Code: 4280
Product Price: $33.10
Product Weight: 16.00 pounds |
More Information and Pricing
Ultra-Heavy-Duty Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1-1/4" shank diameter
- Measures 8-1/2" in length from center of pin hole to center of ball hole
- Provides 1" rise or 2" drop from top of your hitch's receiver tube
- Rated for up to 12,000 lbs GTW and up to 1,200 lbs TW
- Platform 7/8" thick x 3" wide
Replacement Ceiling Garnish for Redline 2-Way Pop-Up Roof Vent - Black
 |
Product Code: 2756
Product Price: $5.25
Product Weight: 1.00 pounds |
More Information and Pricing
Features:
- Improves the appearance of your Redline 2-way pop-up roof vent in your trailer's interior
- Installs inside your trailer
- Slides into vent - adjusts to fit the thickness of your roof
- Hides rough-cut installation hole
- Trims easily to fit thin roofs
Specs:
- Rough opening size: 11-1/8" long x 5-1/2" wide
- Overall dimensions: 14-1/8" long x 8-1/2" wide
- Leg length: 2"
- Rounded radius corner
- Color: black
- This piece has no pre-drilled mounting holes
2756 Redline 2-Way Pop-up Ventilator - Metal - 14-1/8" x 8-1/2"
Ball Mount 2-3/4" Rise or 4" Drop, 6,000 lbs
 |
Product Code: 2753
Product Price: $20.63
Product Weight: 8.00 pounds |
More Information and Pricing
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 8-1/8" long from center of pin hole to center of ball hole
- Distance from center of hitch pin hole to closest edge of ball platform is 4-1/2"
- Provides 2-3/4" rise or 4" drop from the top of your hitch's receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
Ball Mount 2-3/4" Rise or 4" Drop - Extra-Extra-Long, 6,000 lbs
 |
Product Code: 80233
Product Price: $29.95
Product Weight: 12.00 pounds |
More Information and Pricing
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 16" long from center of pin hole to center of ball hole
- Measures 10" long from center of pin hole to the closest part of the weld-on ball mount platform
- Provides 2-3/4" rise or 4" drop from the top of your hitch's receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
Class III (2" x 2") ball mount accessories
Ball Mount 2-3/4" Rise or 4" Drop - Extra-Long, 6,000 lbs
 |
Product Code: 80228
Product Price: $22.95
Product Weight: 10.00 pounds |
More Information and Pricing
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 11-1/4" long from center of pin hole to center of ball hole
- Provides 2-3/4" rise or 4" drop from the top of your hitch's receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
Class III (2" x 2") ball mount accessories
Ball Mount 3" Rise or 4" Drop, 12,000 lbs
 |
Product Code: 4281
Product Price: $37.95
Product Weight: 16.00 pounds |
More Information and Pricing
Ultra-Heavy-Duty Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1-1/4" shank diameter
- Measures 8-1/2" long from center of pin hole to center of ball hole
- Provides 3" rise or 4" drop from the top of your hitch's receiver tube
- Rated for up to 12,000 lbs GTW and up to 1,200 lbs TW
- Ball platform 7/8" thick x 3" wide
Ball Mount 3/4" Rise or 2" Drop, 6,000 lbs
 |
Product Code: 2923
Product Price: $17.78
Product Weight: 6.00 pounds |
More Information and Pricing
Trailer hitch ball mount features an angle cut, allowing it to slide easily into the receiver tube.
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 8-1/2" long from center of pin hole to center of ball hole
- Provides 3/4" rise or 2" drop from the top of your hitch's receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
Ball Mount 3/4" Rise or 2" Drop - Extra-Long, 5,000 lbs
 |
Product Code: 2736
Product Price: $21.90
Product Weight: 8.00 pounds |
More Information and Pricing
Draw-Tite Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Is 12" long from center of pin hole to center of ball hole
- Measures 7" from the center of the hitch pin hole to the ball platform
- Provides 3/4" rise or 2" drop from the top of your hitch receiver tube
- Rated for up to 5000 lbs GTW and up to 500 lbs TW
Class III (2" x 2") ball mount accessories
Ball Mount 4-3/4" Rise or 6" Drop, 6,000 lbs
 |
Product Code: 80240
Product Price: $26.95
Product Weight: 10.00 pounds |
More Information and Pricing
Ball mount features an angle cut, allowing it to slide easily into the receiver tube.
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 9-3/4" long from center of pin hole to center of ball hole
- Provides 4-3/4" rise or 6" drop from the top of your hitch's receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
Class III (2" x 2") ball mount accessories
Ball Mount 5" Rise or 6" Drop, 12,000 lbs
 |
Product Code: 4282
Product Price: $44.95
Product Weight: 19.00 pounds |
More Information and Pricing
Ultra-Heavy-Duty Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1-1/4" shank diameter
- Measures 9-1/2" long from center of pin hole to center of ball hole
- Provides 5" rise or 6" drop from the top of your hitch receiver tube
- Rated for up to 12,000 lbs GTW and up to 1,200 lbs TW
- Ball platform 7/8" thick x 3" wide
Ball Mount 6-3/4" Rise or 8" Drop, 5,000 lbs
 |
Product Code: 2793
Product Price: $26.95
Product Weight: 12.00 pounds |
More Information and Pricing
Draw-Tite Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 10" long from center of pin hole to center of ball hole
- Provides 6-3/4" rise or 8" drop from the top of your hitch receiver tube.
- Rated for up to 5000 lbs GTW and up to 500 lbs TW
Class III (2" x 2") ball mount accessories
Ball Mount 6-3/4" Rise or 8" Drop, 5,000 lbs
 |
Product Code: 80213
Product Price: $25.95
Product Weight: 11.00 pounds |
More Information and Pricing
Hidden Hitch Trailer Hitch Ball Mount
- Ball mount fits 2" x 2" receiver style hitches.
- Uses ball with 1" shank diameter.
- Ball mount is 10" long from center of pin hole to center of ball hole.
- Ball mount provides 6-3/4" rise or 8" drop from the top of your hitch's receiver tube.
- Rated for up to 5000 lb and up to 500 lb tongue weight.
Ball Mount 7" Rise or 8" Drop, 12,000 lbs
 |
Product Code: 4283
Product Price: $55.95
Product Weight: 21.25 pounds |
More Information and Pricing
Ultra-Heavy-Duty Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1-1/4" shank diameter
- Measures 9-1/2" long from center of pin hole to center of ball hole
- Provides 7" rise or 8" drop from top of your hitch receiver tube
- Rated for up to 12,000 lbs GTW and up to 1,200 lbs TW
- Ball platform 7/8" thick x 3" wide
Class III (2" x 2") ball mount accessories
Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 6,000 lbs
 |
Product Code: 80412
Product Price: $84.95
Product Weight: 15.00 pounds |
More Information and Pricing
Perfect for towing trailers of varying coupler heights. Adjustable to 12 different ball height positions. Shank can be used in the up or down position, as required for high or low ground clearance.
- Maximum rise: 8.375"
- Maximum drop: 9.625"
- Shank Dimensions: 2" x 2"
- Capacity: 6,000 lbs GTW and 600 lbs TW
- Conveniently adjusts using included 5/8" pins
- 12" From center of hitch pin hole to center of ball hole
- 7-1/2" from the center of hitch pin hole to the adjustable holes
- Ball platform thickness: 3/4"
- 1-1/2" From the center of 1 hole on the upright bar to the center of another hole
- 1" Diameter shank required for ball
Class III (2" x 2") ball mount accessories
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
 |
Product Code: 7390
Product Price: $119.95
Product Weight: 24.00 pounds |
More Information and Pricing
- Rated at 6,000 lbs GTW and up to 600 lbs TW
- Adjustable shank may be used in the rise or drop position
- 2" x 2" Square hollow shank
- Adjustable platform-mounts for left- or right-hand sway-control attachment
- Uses balls with 1" shank diameter
- Maximum rise: 3-3/4"
- Maximum drop: 5-1/4"
Class III (2" x 2") ball mount accessories
Ball Mount Class III 3/4" Rise or 2" Drop - Super Extra Long, 6,000 lbs
 |
Product Code: 80232
Product Price: $28.95
Product Weight: 4.00 pounds |
More Information and Pricing
Trailer hitch ball mount features an angle cut, allowing it to slide easily into the receiver tube.
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Measures 16" long from center of pin hole to center of ball hole
- Measures 11" from the center of the hitch pin hole to the closest edge of the ball platform piece
- Provides 3/4" rise or 2" drop from the top of your hitch receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
Class III (2" x 2") ball mount accessories
etrailer.com Ball Mount Kit - 3/4" Rise or 2" Drop - 6,000 lbs
 |
Product Code: 989899
Product Price: $56.30
Product Weight: 20.00 pounds |
More Information and Pricing
etrailer.com Ball Mount Kit
- Kit includes:
- (2) Ball mounts with 3/4" rise / 2" drop (# 2923)
- Capacity: 6,000 lbs GTW and 600 lbs TW
- (1) 1-7/8" x 1" x 2-1/8" trailer hitch ball (# 19260)
- (1) 2" x 1" x 2-1/8" Trailer hitch ball (# 19247)
- (1) Pin and clip (# PC3)
- (1) etrailer.com Ball Mount Bag (# ETBMB)
Forged Ball Mount 1" Rise or 2" Drop, 16,000 lbs
 |
Product Code: 40330
Product Price: $37.40
Product Weight: 17.00 pounds |
More Information and Pricing
- Constructed of solid, 1-piece, forged materials
- Has double powder coat finish
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1-1/4" shank diameter
- Is 8-1/2" long from center of pin hole to center of ball hole
- Provides 1" rise or 2" drop from the top of your hitch receiver tube
- Rated for up to 16,000 lbs GTW and up to 1,600 lbs TW
- Ball platform 1" thick x 3" wide
- Requires ball shank to be at least 2-1/4"
- Features angled, quick-load design
40330 Draw-Tite Solid Forged Ball Mount
Reese # 21330; Hidden Hitch # 80142
Forged Ball Mount 3" Rise or 4" Drop, 16,000 lbs
 |
Product Code: 40331
Product Price: $42.45
Product Weight: 18.00 pounds |
More Information and Pricing
- Constructed of solid, 1-piece, forged materials
- Double powder coat finish
- Fits 2" x 2" receiver, style hitches
- Uses ball with 1-1/4" shank diameter
- Is 9-1/4" long from center of pin hole to center of ball hole
- Provides 3" rise or 4" drop from the top of your hitch's receiver tube
- Rated for up to 16,000 lbs GTW and up to 1,600 lbs TW
- Ball platform is 1" thick x 3" wide
- Requires ball shank that is at least 2-1/4" long
- Features angled, quick-load design
40331 Draw-Tite Solid Forged Steel Ball Mount
Reese # 21331; Hidden Hitch # 80143
Forged Ball Mount 5" Rise or 6" Drop, 16,000 lbs
 |
Product Code: 40332
Product Price: $47.95
Product Weight: 21.00 pounds |
More Information and Pricing
- Constructed of solid, 1-piece, forged materials
- Double powder coat finish
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1-1/4" shank diameter
- Is 10-1/4" long from center of pin hole to center of ball hole
- Provides 5" rise or 6" drop from top of your hitch receiver tube
- Rated for up to 16,000 lbs GTW and up to 1,600 lbs TW
- Ball platform is 1" thick x 3" wide
- Requires ball shank that is at least 2-1/4" long
- Features angled, quick-load design
40332 Draw-Tite Solid Forged Ball Mount
Reese # 21332; Hidden Hitch # 80144
Stainless Steel Ball Mount 3/4" Rise or 2" Drop, 6,000 lbs
 |
Product Code: CR-701
Product Price: $39.95
Product Weight: 8.00 pounds |
More Information and Pricing
Stainless Steel Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Is 7-3/4" long from center of pin hole to center of ball hole
- Provides 3/4" rise or 2" drop from the top of your hitch receiver tube
- Rated for up to 6000 lbs GTW and up to 600 lbs TW
- Corrosion and rust resistant
Class III (2" x 2") ball mount accessories
Aluminum Ball Mount 1" Rise or 2" Drop, 8,000 lbs
 |
Product Code: V77010
Product Price: $39.95
Product Weight: 4.00 pounds |
More Information and Pricing
Valley Solid Aluminum Trailer Hitch Ball Mount
- Fits 2" x 2" receiver-style hitches
- Uses ball with 1" shank diameter
- Platform measures 1" thick
- Is 9-1/2" long from center of pin hole to center of ball hole
- Provides 1" rise or 2" drop from the top of your hitch receiver tube
- Rated for up to 8,000 lbs GTW and up to 800 lbs TW
- Corrosion and rust resistant
Replaces Draw-Tite #40381
Trailer Hitch Ball Mount 10" Drop, 5,000 lbs
 |
Product Code: BM10
Product Price: $54.95
Product Weight: 14.00 pounds |
More Information and Pricing
Trailer Hitch Ball Mount
- Fits 2" x 2" trailer hitches
- Uses ball with 1" shank diameter
- Is 10-1/2" long from center of pin hole to center of ball hole
- Provides 10" drop from the top of your hitch receiver tube
- Rated for up to 5000 lbs GTW and up to 500 lbs TW
Note: Use of any ball mount with a 10" drop reduces the trailer hitch capacity by 1/3. Your towing capacity is limited to 2/3 of your lowest rated towing component - be it the vehicle, hitch, ball mount, hitch ball etc. Do not use with hitch extenders. Do not use in reverse position.
Class III (2" x 2") ball mount accessories
Two-Balls-and-Sticks Hitch Aligner
 |
Product Code: 53410
Product Price: $19.95
Product Weight: 2.00 pounds |
More Information and Pricing
A fast, safe and reliable hitching aid for all types of trailers, including fifth wheels and goosenecks.
- Quickly line up your trailer without assistance
- Strong, heavy-duty magnets on the bottom of rods attach both the trailer and hitch
- Yellow balls are easy to see
- Rods telescope up to 42-1/4"
- Both rods collapse down to 13-1/2" for easy storage
- Chrome finish resists rust and corrosion
Reese # 70129 Solo Hitch; Tow Ready # 63300
Aluminum Ball Mount 3" Rise or 4" Drop, 8,000 lbs
 |
Product Code: 40382
Product Price: $57.95
Product Weight: 5.00 pounds |
More Information and Pricing
Draw-Tite Solid Aluminum Trailer Hitch Ball Mount
- Fits 2" x 2" receiver style hitches
- Uses ball with 1" shank diameter
- Platform measures 1" thick
- Is 10-5/8" long from center of pin hole to center of ball hole
- Provides 3" rise or 4" drop from the top of your hitch receiver tube
- Rated for up to 8,000 lbs GTW and up to 800 lbs TW
- Made of aluminum - resists rust and corrosion
Aluminum Ball Mount 5" Rise or 6" Drop, 8,000 lbs.
 |
Product Code: 40383
Product Price: $74.95
Product Weight: 7.00 pounds |
More Information and Pricing
Draw-Tite Solid Aluminum Trailer Hitch Ball Mount
- Fits 2" x 2" receiver style hitches
- Uses ball with 1" shank diameter
- Platfrom measures 1" thick
- Is 11-7/8" long from center of pin hole to center of ball hole
- Provides 5" rise or 6" drop from the top of your hitch receiver tube
- Rated for up to 8,000 lbs GTW and up to 800 lbs TW
- Made of aluminum - resists rust and corrosion
Class III (2" x 2") Ball mount Accessories
Aluminum Ball Mount 7" Rise or 8" Drop, 6,000 lbs.
 |
Product Code: 40384
Product Price: $66.04
Product Weight: 8.00 pounds |
More Information and Pricing
Draw-Tite Solid Aluminum Trailer Hitch Ball Mount
- Fits 2" x 2" receiver style hitches
- Uses ball with 1" shank diameter
- Platfrom measures 1" thick
- Is 10-7/8" long from center of pin hole to center of ball hole
- Provides 7" rise or 8" drop from the top of your hitch receiver tube
- Rated for up to 6,000 lbs GTW and up to 600 lbs TW
- Made of aluminum - resists rust and corrosion
Ball Mount 9-3/4" Rise or 11" Drop, 3,500 - 5,000 lbs.
 |
Product Code: 80248
Product Price: $37.95
Product Weight: 13.00 pounds |
More Information and Pricing
Hidden Hitch Trailer Hitch Ball Mount
- Fits 2" x 2" trailer hitches
- Uses ball with 1" shank diameter
- Is 9" long from center of pin hole to center of ball hole
- Provides 9-3/4" rise or 11" drop from the top of your hitch receiver tube opening
- Measures 3-3/4" from the center of the hitch pin hole to the brace on the back
- Rated for up to 3,500 lbs GTW and 350 lbs TW when used in the "Rise" position
- Rated for up to 5,000 lbs GTW and up to 500 lbs TW when used in the "Drop" position
Class III (2" x 2") ball mount accessories
60248 Class III Trailer Hitch Ball Mount
Solid Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTBM4200
Product Price: $54.95
Product Weight: 4.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1"
- Ball platform thickness: 1"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 1" from the top of the hitch receiver opening
- Drop: 2" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-1/4"
- 1-Year limited warranty
DT-BM4200 Diversi-Tech 2" Drop, 1" Rise Hitch - Solid Billet Aluminum
Solid Aluminum Ball Mount - 4" Drop, 3" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTBM4400
Product Price: $64.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1"
- Ball platform measures 1" thick
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 3" from the top of the hitch receiver opening
- Drop: 4" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
DT-BM4400 Diversi-Tech 4" Drop, 3" Rise Hitch - Solid Billet Aluminum
Solid Aluminum Ball Mount - 6" Drop, 5" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTBM4600
Product Price: $69.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 5" from the top of the hitch receiver opening
- Drop: 6" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-3/4"
- 1-Year limited warranty
DT-BM4600 Diversi-Tech 6" Drop, 5" Rise Hitch - Solid Billet Aluminum
Solid Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTBM5200
Product Price: $59.95
Product Weight: 4.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1-1/4"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 1" from the top of the hitch receiver opening
- Drop: 2" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-1/4"
- 1-Year limited warranty
DT-BM5200 Diversi-Tech 2" Drop, 1" Rise Hitch - Solid Billet Aluminum
Solid Aluminum Ball Mount - 4" Drop, 3" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTBM5400
Product Price: $69.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1-1/4"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 3" from the top of the hitch receiver opening
- Drop: 4" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
DT-BM5400 Diversi-Tech 4" Drop, 3" Rise Hitch - Solid Billet Aluminum
Solid Aluminum Ball Mount - 6" Drop, 5" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTBM5600
Product Price: $74.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1-1/4"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 5" from the top of the hitch receiver opening
- Drop: 6" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-3/4"
- 1-Year limited warranty
DT-BM5600 Diversi-Tech 6" Drop, 5" Rise Hitch - Solid Billet Aluminum
Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTLBM9200
Product Price: $79.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Convenient, self-locking system locks ball mount to receiver tube
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (2 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1-1/4"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 2" from the top of the hitch receiver opening
- Drop: 1" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-1/4"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
DT-LBM9200 Diversi-Tech Self-Locking Series 2" Drop, 1" Rise Hitch - Solid Billet Aluminum
Self-Locking, Aluminum Ball Mount - 4" Drop, 3" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTLBM9400
Product Price: $84.95
Product Weight: 5.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Convenient, self-locking system locks ball mount to receiver tube
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (2 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1-1/4"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 3" from the top of the hitch receiver opening
- Drop: 4" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
DT-LBM9400 Diversi-Tech Self-Locking Series 4" Drop, 3" Rise Hitch - Solid Billet Aluminum
Self-Locking, Aluminum Ball Mount - 6" Drop, 5" Rise - Anti-Rattle Tensioned - 14,000 lbs
 |
Product Code: DTLBM9600
Product Price: $89.95
Product Weight: 6.00 pounds |
More Information and Pricing
Features:
- Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
- Convenient, self-locking system locks ball mount to receiver tube
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (2 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball hole diameter: 1-1/4"
- Towing capacity: 14,000 lbs
- Tongue weight capacity: 2,000 lbs
- Rise: 5" from the top of the hitch receiver opening
- Drop: 6" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to center of ball: 8-3/4"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
DT-LBM9600 Diversi-Tech Self-Locking Series 6" Drop, 5" Rise Hitch - Solid Billet Aluminum
Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 4" Drop, 5" Rise - 10K
 |
Product Code: DTALBM6400
Product Price: $229.95
Product Weight: 17.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 1-7/8" and 2"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 5" from the top of the hitch receiver opening
- Maximum drop: 4" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
The built-in anti-rattle balls prevent the shank from rattling when the ball mount isn't hooked up to a trailer, preventing movement that could cause noise and wear.
DT-ALBM6400 Diversi-Tech Self-Locking Series 4" Drop, 5" Rise Adjustable Hitch - Solid Billet Aluminum
Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 10" Drop, 11" Rise - 10K
 |
Product Code: DTALBM7000
Product Price: $274.95
Product Weight: 20.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 11" from the top of the hitch receiver opening
- Maximum drop: 10" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
The built-in anti-rattle balls prevent the shank from rattling when the ball mount isn't hooked up to a trailer, preventing movement that could cause noise and wear.
DT-ALBM7000 Diversi-Tech Self-Locking Series 10" Drop, 11" Rise Adjustable Hitch - Solid Billet Aluminum
Solid-Tow Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 4" Drop, 5" Rise - 10K
 |
Product Code: DTSTBM6400
Product Price: $199.95
Product Weight: 17.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Self-tensioning, anti-rattle Solid-Tow system tightens ball mount inside receiver tube and secures ball platform to ball mount
- Stops rattle and clunk
- Uses internal, stainless steel bolts for long life
- Adjusts with Allen wrench (included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 5" from the top of the hitch receiver opening
- Maximum drop: 4" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This Diversi-Tech Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver. The balls and the adjustable ball platform tighten also, eliminating movement. You'll enjoy the quiet, rattle-free towing experience.
A bolt in the side of the ball platform tightens it to the mount. When you loosen the bolt with the hex tool, you can slide the platform up or down to change the ball height. Or, you can slide the platform off and reverse it to use the other ball.
A bolt in the end of the platform tightens the ball set in place. When the bolt is removed, you can take out the ball set. Then you can easily replace the balls.
DT-STBM6400 Diversi-Tech Solid-Tow Series 4" Drop, 5" Rise Adjustable Hitch - Solid Billet Aluminum
Solid-Tow Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 6" Drop, 7" Rise - 10K
 |
Product Code: DTSTBM6600
Product Price: $204.95
Product Weight: 18.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Self-tensioning, anti-rattle Solid-Tow system tightens ball mount inside receiver tube and secures ball platform to ball mount
- Stops rattle and clunk
- Uses internal, stainless steel bolts for long life
- Adjusts with Allen wrench (included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 7" from the top of the hitch receiver opening
- Maximum drop: 6" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This Diversi-Tech Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver. The balls and the adjustable ball platform tighten also, eliminating movement. You'll enjoy the quiet, rattle-free towing experience.
A bolt in the side of the ball platform tightens it to the mount. When you loosen the bolt with the hex tool, you can slide the platform up or down to change the ball height. Or, you can slide the platform off and reverse it to use the other ball.
A bolt in the end of the platform tightens the ball set in place. When the bolt is removed, you can take out the ball set. Then you can easily replace the balls.
DT-STBM6600 Diversi-Tech Solid-Tow Series 6" Drop, 7" Rise Adjustable Hitch - Solid Billet Aluminum
Solid-Tow Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 8" Drop, 9" Rise - 10K
 |
Product Code: DTSTBM6800
Product Price: $214.95
Product Weight: 19.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Self-tensioning, anti-rattle Solid-Tow system tightens ball mount inside receiver tube and secures ball platform to ball mount
- Stops rattle and clunk
- Uses internal, stainless steel bolts for long life
- Adjusts with Allen wrench (included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 9" from the top of the hitch receiver opening
- Overall length when adjusted to max is 11"
- Maximum drop: 8" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This Diversi-Tech Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver. The balls and the adjustable ball platform tighten also, eliminating movement. You'll enjoy the quiet, rattle-free towing experience.
A bolt in the side of the ball platform tightens it to the mount. When you loosen the bolt with the hex tool, you can slide the platform up or down to change the ball height. Or, you can slide the platform off and reverse it to use the other ball.
A bolt in the end of the platform tightens the ball set in place. When the bolt is removed, you can take out the ball set. Then you can easily replace the balls.
DT-STBM6800 Diversi-Tech Solid-Tow Series 8" Drop, 9" Rise Adjustable Hitch - Solid Billet Aluminum
Solid-Tow Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 10" Drop, 11" Rise - 10K
 |
Product Code: DTSTBM7000
Product Price: $244.95
Product Weight: 20.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Self-tensioning, anti-rattle Solid-Tow system tightens ball mount inside receiver tube and secures ball platform to ball mount
- Stops rattle and clunk
- Uses internal, stainless steel bolts for long life
- Adjusts with Allen wrench (included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 11" from the top of the hitch receiver opening
- Maximum drop: 10" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Overall length is max position is 13"
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This Diversi-Tech Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver. The balls and the adjustable ball platform tighten also, eliminating movement. You'll enjoy the quiet, rattle-free towing experience.
A bolt in the side of the ball platform tightens it to the mount. When you loosen the bolt with the hex tool, you can slide the platform up or down to change the ball height. Or, you can slide the platform off and reverse it to use the other ball.
A bolt in the end of the platform tightens the ball set in place. When the bolt is removed, you can take out the ball set. Then you can easily replace the balls.
DT-STBM7000 Diversi-Tech Solid-Tow Series 10" Drop, 11" Rise Adjustable Hitch - Solid Billet Aluminum
Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 4" Drop, 5" Rise - 10K
 |
Product Code: DTALBM6425
Product Price: $254.95
Product Weight: 18.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- 2-1/2" Shank fits 2-1/2" receivers
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2-1/2" x 2-1/2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 5" from the top of the hitch receiver opening
- Maximum drop: 4" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
DT-ALBM6425 Diversi-Tech Self-Locking Series 4" Drop, 5" Rise Adjustable Hitch - Solid Billet Aluminum
Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 6" Drop, 7" Rise - 10K
 |
Product Code: DTALBM6625
Product Price: $264.95
Product Weight: 19.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- 2-1/2" Shank fits 2-1/2" receivers
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2-1/2" x 2-1/2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 7" from the top of the hitch receiver opening
- Maximum drop: 6" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
DT-ALBM6625 Diversi-Tech Self-Locking Series 6" Drop, 7" Rise Adjustable Hitch - Solid Billet Aluminum
Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 8" Drop, 9" Rise - 10K
 |
Product Code: DTALBM6825
Product Price: $279.95
Product Weight: 20.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- 2-1/2" Shank fits 2-1/2" receivers
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2-1/2" x 2-1/2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 9" from the top of the hitch receiver opening
- Maximum drop: 8" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
DT-ALBM6825 Diversi-Tech Self-Locking Series 8" Drop, 9" Rise Adjustable Hitch - Solid Billet Aluminum
Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 10" Drop, 11" Rise - 10K
 |
Product Code: DTALBM7025
Product Price: $299.95
Product Weight: 21.00 pounds |
More Information and Pricing
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- 2-1/2" Shank fits 2-1/2" receivers
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2-1/2" x 2-1/2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 1,500 lbs
- Maximum rise: 11" from the top of the hitch receiver opening
- Maximum drop: 10" from the top of the hitch receiver opening
- Height adjustment: 1" increments
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
DT-ALBM7025 Diversi-Tech Self-Locking Series 10" Drop, 11" Rise Adjustable Hitch - Solid Billet Aluminum
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
 |
Product Code: D210
Product Price: $59.95
Product Weight: 13.00 pounds |
More Information and Pricing
Features:
- Allows you to carry hitch accessories while towing
- Comes with pin and clip
Specs:
- Suitable for 2" x 2" receiver hitch
- Trailer hitch ball with 1" shank diameter is required
- Ball mount
- Length: 12-1/2" from center of hitch pin hole to center of ball hole
- Drop: 2-1/4" from top of vehicle's 2" hitch opening to top of ball platform
- 2" Receiver
- 7-1/2" extension from center of hitch pin hole to center of receiver's hitch pin hole
- Rise: 6"
- Towing capacity: 7,500 lbs
- Tongue weight capacity: 750 lbs
- Receiver capacity: 350 lbs
NOTE: Receiver portion for use with accessories; not for use with towing.
D-210 Curt Multi-Purpose Ball Mount
Curt Ball Mount with Sway Control Bracket, 3/4" Rise or 2" Drop
 |
Product Code: D320
Product Price: $31.07
Product Weight: 8.00 pounds |
More Information and Pricing
Features:
- Provides either 3/4" rise or 2" drop
- Has built-in bracket for easy installation of Sway Control Kit (sold separately)
Specs:
- Fits 2" x 2" receiver hitch
- Requires ball with 1" shank diameter
- 8-1/4" from center of hitch pin hole to center of ball hole
- 3/4" rise from top of receiver opening to top of ball platform
- 2" drop from top of receiver opening to top of ball platform
- Towing capacity: 6,000 lbs
- Tongue weight capacity: 600 lbs
D-320 Curt Ball Mount Sway Control
QuietRide Ball Mount w/Lock, 3/4" Rise, 2" Drop, 1" Ball Hole, 10,000 lbs
 |
Product Code: SR25733
Product Price: $58.49
Product Weight: 9.00 pounds |
More Information and Pricing
Features:
- Threaded, stainless steel hitch pin tightens securely to a nut fixed to the inside of the ball mount's inner wall
- Pulls the ball mount to the side of the receiver tube
- Eliminates excess horizontal space that leads to rattling
- "Gold wedge" cuts down on additional vertical space between the ball mount and the receiver tube
- Muffles common "clanking" sound
- Protects the vehicle's powertrain
- Sturdy brass lock includes dust cover to shield it from road debris
- Rugged, powder coated steel construction thwarts rust and corrosion
Specs:
- 2" x 2" hitch receiver
- 3/4" rise from the top of the receiver tube opening
- 2" drop from the top of the receiver tube opening
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- 1" ball hole diameter
- 10" from center of hitch pin hole to center of ball hole
- Inside width of lock: 3"
- 7/8" wrench or socket is needed to tighten hitch pin
- Limited lifetime warranty
This ball mount offers two distinguishing features that provide a smooth towing experience. First, a threaded, stainless steel hitch pin weaves securely through a threaded hole in the ball mount. This innovation pulls the ball mount to the receiver tube and eliminates the horizontal (left to right) gap that leads to rattling. Second, as the ball mount is pulled to the side, the floating "gold wedge" is pushed to the top of the receiver tube and is wedged in place. This prevents the ball mount from moving vertically (up and down) in the receiver tube, eliminating slack in all directions. The annoying "clanking" is now gone and the drivetrain is better protected.
The hitch pin includes a brass lock with a dust cover to protect it from road debris. With a maximum 10,000lbs gross towing weight, this ball mount accommodates any 2" hitch receiver and offers a 1" shank hole. It also sports a rugged, powder coated steel construction.
The image of the back side of the ball mount shows its hollow shank. On the inside is a threaded, square block that is welded into place. It works with the threaded hitch pin to pull the ball mount to the side of the hitch receiver opening. The gold wedge on the left can float to take up additional vertical space in the receiver tube.
25733 Softride QuietRide Steel Anti-Rattle Ball Mount and Lock
QuietRide Ball Mount w/Lock, 2-3/4" Rise, 4" Drop, 1" Ball Hole, 10,000 lbs
 |
Product Code: SR25734
Product Price: $62.99
Product Weight: 10.00 pounds |
More Information and Pricing
Features:
- Threaded, stainless steel hitch pin tightens securely to a nut fixed to the inside of ball mount's inner wall
- Pulls the ball mount to the side of the receiver tube
- Eliminates excess horizontal space that leads to rattling
- "Gold wedge" cuts down on additional vertical space between ball mount and receiver tube
- Muffles common "clanking" sound
- Protects the vehicle's powertrain
- Sturdy brass lock includes dust cover to shield it from road debris
- Rugged, powder coated steel construction thwarts rust and corrosion
Specs:
- 2" x 2" Hitch receiver
- 2-3/4" rise from the top of the receiver tube opening
- 4" drop from the top of the receiver tube opening
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- 1" ball hole diameter
- 10-1/2" from center of hitch pin hole to center of ball hole
- 7/8" wrench or socket is needed to tighten hitch pin
- Limited lifetime warranty
This ball mount offers two distinguishing features that provide a smooth towing experience. First, a threaded, stainless steel hitch pin weaves securely through a threaded hole in the ball mount. This innovation pulls the ball mount to the receiver tube and eliminates the horizontal (left-to-right) gap that leads to rattling. Second, as the ball mount is pulled to the side, the floating "gold wedge" is pushed to the top of the receiver tube and wedged in place. This prevents the ball mount from moving vertically (up and down) in the receiver tube, eliminating slack in all directions. The annoying "clanking" is now gone and the drivetrain is better protected.
The hitch pin includes a brass lock with a dust cover to protect it from road debris. With a maximum 10,000lbs gross towing weight, this ball mount accommodates any 2" hitch receiver and offers a 1" shank hole. It also sports a rugged, powder coated steel construction.
The image of the back side of the ball mount shows its hollow shank. On the inside is a threaded, square block that is welded into place. It works with the threaded hitch pin to pull the ball mount to the side of the hitch receiver opening. The gold wedge on the left can float to take up additional vertical space in the receiver tube.
25734 Softride QuietRide Steel Anti-Rattle Ball Mount and Lock
QuietRide Ball Mount w/Lock, 4-3/4" Rise, 6" Drop, 1" Ball Hole, 10,000 lbs
 |
Product Code: SR25735
Product Price: $67.49
Product Weight: 11.00 pounds |
More Information and Pricing
Features:
- Threaded, stainless steel hitch pin tightens securely to a nut fixed to the inside of ball mount's inner wall
- Pulls the ball mount to the side of the receiver tube
- Eliminates excess horizontal space that leads to rattling
- "Gold wedge" cuts down on additional vertical space between ball mount and receiver tube
- Muffles common "clanking" sound
- Protects the vehicle's powertrain
- Sturdy brass lock includes dust cover to shield it from road debris
- Rugged, powder coated steel construction thwarts rust and corrosion
Specs:
- 2" x 2" hitch receiver
- 4-3/4" rise from the top of the receiver tube opening
- 6" drop from the top of the receiver tube opening
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- 1" ball hole diameter
- 11-1/2" from center of hitch pin hole to center of ball hole
- 7/8" wrench or socket is needed to tighten hitch pin
- Limited lifetime warranty
This ball mount offers two distinguishing features that provide a smooth towing experience. First, a threaded, stainless steel hitch pin weaves securely through a threaded hole in the ball mount. This innovation pulls the ball mount to the receiver tube and eliminates the horizontal (left-to-right) gap that leads to rattling. Second, as the ball mount is pulled to the side, the floating "gold wedge" is pushed to the top of the receiver tube and wedged in place. This prevents the ball mount from moving vertically (up and down) in the receiver tube, eliminating slack in all directions. The annoying "clanking" is now gone and the drivetrain is better protected.
The hitch pin includes a brass lock with a dust cover to protect it from road debris. With a maximum 10,000lbs gross towing weight, this ball mount accommodates any 2" hitch receiver and offers a 1" shank hole. It also sports a rugged, powder coated steel construction.
The image of the back side of the ball mount shows its hollow shank. On the inside is a threaded, square block that is welded into place. It works with the threaded hitch pin to pull the ball mount to the side of the hitch receiver opening. The gold wedge on the left can float to take up additional vertical space in the receiver tube.
25735 Softride QuietRide Steel Anti-Rattle Ball Mount and Lock
QuietRide Aluminum Ball Mount w/Lock, 3/4" Rise, 2" Drop, 1-1/4" Hole, 10,000 lbs
 |
Product Code: SR26039
Product Price: $80.99
Product Weight: 6.00 pounds |
More Information and Pricing
Features:
- Threaded, stainless steel hitch pin weaves through a threaded hole in the solid aluminum ball mount
- Pulls the ball mount closer to the receiver tube
- Minimizes excess horizontal space that leads to rattling
- "Gold wedge" cuts down on additional vertical space between ball mount and receiver tube
- Muffles common "clanking" sound
- Protects the vehicle's powertrain
- Sturdy brass lock includes dust cover to shield it from road debris
- Single-piece, forged, heat-treated aluminum construction deflects rust and corrosion
Specs:
- 2" x 2" hitch receiver
- 2" drop from the top of the receiver tube opening
- 3/4" rise from the top of the receiver tube opening
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- 1-1/4" ball hole diameter
- Includes adapter sleeve to accommodate 1" ball shanks
- 8" from center of hitch pin hole to center of ball hole
- Ball mount weighs 5 lbs
- Ball platform is 1" thick
- 7/8" wrench or socket is needed to tighten hitch pin
- Limited lifetime warranty
This ball mount offers two distinguishing features that provide a smooth towing experience. First, a threaded, stainless steel hitch pin weaves securely through a threaded hole in the ball mount. This innovation pulls the ball mount to the receiver tube and eliminates the horizontal (left-to-right) gap that leads to rattling. Second, as the ball mount is pulled to the side, the floating "gold wedge" is pushed to the top of the receiver tube and wedged in place. This prevents the ball mount from moving vertically (up and down) in the receiver tube, eliminating slack in all directions. The annoying "clanking" is now gone and the drivetrain is better protected.
The hitch pin includes a brass lock with a dust cover to protect it from road debris. With a maximum 10,000lbs gross towing weight, this ball mount slides into any 2" hitch receiver and offers a 1-1/4" ball shank hole with a bushing for 1" ball shanks. It is constructed from a single piece of forged, heat-treated aluminum.
26039 Softride QuietRide Aluminum Anti-Rattle Ball Mount and Lock
QuietRide Aluminum Ball Mount w/Lock, 2-3/4" Rise, 4" Drop, 1-1/4" Hole, 10,000 lbs
 |
Product Code: SR26040
Product Price: $89.99
Product Weight: 7.00 pounds |
More Information and Pricing
Features:
- Threaded, stainless steel hitch pin weaves through a threaded hole in the solid aluminum ball mount
- Pulls the ball mount closer to the receiver tube
- Minimizes excess horizontal space that leads to rattling
- "Gold wedge" cuts down on additional vertical space between ball mount and receiver tube
- Muffles common "clanking" sound
- Protects the vehicle's powertrain
- Sturdy brass lock includes dust cover to shield it from road debris
- Single-piece, forged, heat-treated aluminum construction deflects rust and corrosion
Specs:
- 2" x 2" hitch receiver
- 4" drop from the top of the receiver tube opening
- 2-3/4" rise from the top of the receiver tube opening
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- 1-1/4" ball hole diameter
- Includes adapter sleeve to accommodate 1" ball shanks
- 8-3/4" from the center of hitch pin hole to the center of ball hole
- Ball mount weighs 6 lbs
- 7/8" wrench or socket is needed to tighten hitch pin
- Limited lifetime warranty
This ball mount offers two distinguishing features that provide a smooth towing experience. First, a threaded, stainless steel hitch pin weaves securely through a threaded hole in the ball mount. This innovation pulls the ball mount to the receiver tube and eliminates the horizontal (left-to-right) gap that leads to rattling. Second, as the ball mount is pulled to the side, the floating "gold wedge" is pushed to the top of the receiver tube and wedged in place. This prevents the ball mount from moving vertically (up and down) in the receiver tube, eliminating slack in all directions.
The hitch pin includes a brass lock with a dust cover to protect it from road debris. With a maximum 10,000lbs gross towing weight, this ball mount slides into any 2" hitch receiver and offers a 1-1/4" ball shank hole with a bushing for 1" ball shanks. It is constructed from a single piece of forged, heat-treated aluminum.
26040 Softride QuietRide Aluminum Anti-Rattle Ball Mount and Lock
QuietRide Aluminum Ball Mount w/Lock, 4-3/4" Rise, 6" Drop, 1-1/4" Hole, 10,000 lbs
 |
Product Code: SR26041
Product Price: $98.99
Product Weight: 8.00 pounds |
More Information and Pricing
Features:
- Threaded, stainless steel hitch pin weaves through a threaded hole in the solid aluminum ball mount
- Pulls the ball mount closer to the receiver tube
- Minimizes excess horizontal space that leads to rattling
- "Gold wedge" cuts down on additional vertical space between ball mount and receiver tube
- Muffles common "clanking" sound
- Protects the vehicle's powertrain
- Sturdy, brass lock includes dust cover to shield it from road debris
- Single-piece, forged, heat-treated aluminum construction deflects rust and corrosion
Specs:
- 2" x 2" hitch receiver
- 6" drop from the top of the receiver tube opening
- 4-3/4" rise from the top of the receiver tube opening
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- 1-1/4" ball hole diameter
- Includes aluminum adapter sleeve to accommodate 1" ball shanks
- 9-3/4" from center of hitch pin hole to center of ball hole
- Ball mount weighs 7 lbs
- 7/8" wrench or socket is needed to tighten hitch pin
- Limited lifetime warranty
This ball mount offers two distinguishing features that provide a smooth towing experience. First, a threaded, stainless steel hitch pin weaves securely through a threaded hole in the ball mount. This innovation pulls the ball mount to the receiver tube and eliminates the horizontal (left-to-right) gap that leads to rattling. Second, as the ball mount is pulled to the side, the floating "gold wedge" is pushed to the top of the receiver tube and wedged in place. This prevents the ball mount from moving vertically (up-and-down) in the receiver tube, eliminating slack in all directions.
The hitch pin includes a brass lock with a dust cover to protect it from road debris. With a maximum 10,000lbs gross towing weight, this ball mount slides into any 2" hitch receiver and offers a 1-1/4" ball shank hole with a bushing for 1" ball shanks. It is constructed from a single piece of forged, heat-treated aluminum.
26041 Softride QuietRide Aluminum Anti-Rattle Ball Mount and Lock
Curt Vertical 2" to Fixed Ball Mount - 9-1/8" Long, 2-1/4" Rise
 |
Product Code: C45003
Product Price: $56.95
Product Weight: 9.00 pounds |
More Information and Pricing
- 2" Opening to fixed vertical ball mount
- Length: 9-1/8"
- Rise: 2-1/4"
- Weight rating:
45003 Curt Ball Mount Adapter - 2" to Fixed Vertical Mount
Curt Vertical Receiver Adapter - 2" to 2", 4-1/4" Long, 2-7/16" Drop
 |
Product Code: C45013
Product Price: $38.95
Product Weight: 7.00 pounds |
More Information and Pricing
- 2" to 2" Vertical receiver adapter
- Length: 4-1/4"
- Drop: 2-7/16"
- Can only be used in the drop position
- Weight rating:
Note: Specifically designed for use with Curt stealth hitches only.
Due to pin hole locations, will not match up with other stealth hitches.
45013 Curt Vertical Receiver Adapter
