Product Code: 80515 Product Price: $269.95 Product Weight: 27.00 pounds

More Information and Pricing

Atwood Power Jacks use a powerful 12 volt weather resistant DC motor with slip resistant clutch which is protected by a rugged polyethylene cover. The jack is permanently lubricated and features a detachable foot pad on a high strength, zinc plated and black powder coated tube. The deluxe model also features a bright, built-in light for illumination of the trailer tongue and tow vehicle after dark.

• Capacity: 2,500 lbs.
• Lift: 14"
• Bracket Height: 10-1/8"
• Retracted Height: 24-7/8"
• Rate of Travel: 10" per minute

 

Product Code: 80530 Product Price: $324.95 Product Weight: 39.00 pounds

More Information and Pricing

Atwood Power Jacks use a powerful 12 volt weather resistant DC motor with slip resistant clutch which is protected by a rugged polyethylene cover. The jack is permanently lubricated and features a detachable foot pad on a high strength, zinc plated and black powder coated tube. This model also features a bright, built-in light for illumination of the trailer tongue and tow vehicle after dark.

• Capacity: 3500 lbs.
• Lift: 14"
• Bracket Height: 10-1/8"
• Retracted Height: 24-7/8"
• Rate of Travel: 15" per minute

 

Product Code: 76854 Product Price: $104.95 Product Weight: 36.00 pounds

More Information and Pricing

CP Products Crossframe Mount Stabilizer Jacks

These stabilizer jacks mount across the frame of your trailer and adjust to fit frame widths of 64"-74". They provide support, relief from rocking and tilting as you move around inside your trailer and assist in fine-tune leveling. Self-store out of the way when not in use.

• For trailers with up to 17" clearance from ground to frame
• 20" leg length
• 8" crank stem
• Static load capacity: 2,000 lbs.
• Optional foot pads available (sold separately)

 

Product Code: EZ-JACK Product Price: $64.95 Product Weight: 11.00 pounds

More Information and Pricing

EZ Jack, EZ Level, Wheel Chock - 3-in-1 Accessory for Tandem Wheel Trailers and RVs

The EZ Jack is an easy-to-use, safe and reliable device for changing tires on tandem axle trailers. Simply place the wedge in front of the wheel that does not need to be changed. Pull the trailer forward (or backward) up onto the EZ Jack until the flat tire is up in the air. Flip the wedge over (rocker side down) to function as an excellent wheel chock.

• Capacity: 20,000 lbs.
• Functions as a jack, a wheel chock and a leveler
• Measures 6-1/8" wide x 19" long x 5-3/4" tall
• Made in the USA

 

Product Code: BAL-24SJ Product Price: $164.95 Product Weight: 38.00 pounds

More Information and Pricing

Leveling Scissor Jacks

• Capacity: 10,000 lbs.
• Each jack has a lifting capacity of 5,000 lbs.
• Extended Height: 23-3/4"
• Retracted Height: 4"
• 19-3/4" Lift
• Includes Handle

 

Product Code: 70135 Product Price: $145.95 Product Weight: 45.00 pounds

More Information and Pricing
Scissor Jacks stabilize and level your travel trailer or fifth wheel.

• Capacity: 13,000 lbs.
• Each jack has a lifting capacity of 6,500 lbs.
• Universal Design - Fits Most RVs
• Extended Height: 28"
• Retracted Height: 4-1/4"
• Black Powder Coat Finish
• Attaching hardware, instructions and easy-to-use swivel handle are all included

 

Product Code: 75333 Product Price: $349.95 Product Weight: 75.00 pounds

More Information and Pricing

The most widely accepted Fifth Wheel Landing Gear in today's market-place. Telescoping heavy-duty tubing (2-1/2", 6.4 cm housing), large footpads and sturdy mounting hardware mean greater trailer stability and reduced sway.

Atwood R.V. Landing Gear provides 36" of adjustment. The gear driven extension has 20" of travel and the inner drop tube adjusts an additional 16" for a total adjustment of 36". Plus the quick to ground feature, a double tube extension design, allows the inner tube to be dropped to the ground and pinnned in place to quickly extend or retract the legs on even or uneven terrain. A 3:1 gear box reduces the cranking effort needed to lower the legs the rest of the way.

• Capacity: 6,000 lbs.
• 20" Lift
• 16" Dropleg Travel
• Total Adjustment: 36"

 

Product Code: 273800 Product Price: $32.99 Product Weight: 12.00 pounds

More Information and Pricing

Atwood Topwind A-Frame Trailer Jack. For mounting on A-Frame Couplers with bolt-on or weld applications.

• 5,000 lbs. capacity
• 14" lift
• 11-1/4" bracket height
• 22" Retracted Height

Atwood #80391

 

Product Code: 273400 Product Price: $45.57 Product Weight: 11.00 pounds

More Information and Pricing
Atwood Sidewind A-Frame Trailer Jack. For mounting on A-Frame Couplers with bolt-on or weld-on applications.

• Capacity: 2000 lbs.
• 14" lift
• 7-3/4" bracket height
• 24-1/4" retracted height

Atwood # 87510
 

Product Code: 40004 Product Price: $39.95 Product Weight: 11.00 pounds

More Information and Pricing

Atwood Snap Ring Trailer Jacks swing either direction to a position parallel with the tongue. The spring loaded double-lock pin secures the jack in an up or down position.

• 2,000 lbs. capacity
• 10" lift
• 11-1/2" bracket height
• 15" retracted height
• Jack foot included
• Weld-on mounting bracket with snap ring is included

Replaces 270000

 

Product Code: 190510 Product Price: $94.95 Product Weight: 25.00 pounds

More Information and Pricing

The Dropleg Trailer Jack feature 2 1/2" square painted outer tubing and plated inner legs.

• static load: 8,000 lbs
• lift capacity: 7,000 lbs
• lift: 15"
• dropleg travel: 13-1/2"
• retracted height: 22.95"
• maximum extension: 40"
• Sidewind jack

Was # 286200

 

Product Code: 190500 Product Price: $94.95 Product Weight: 25.00 pounds

More Information and Pricing

The Dropleg Trailer Jack feature 2-1/2" square painted outer tubing and plated inner legs.

• 8,000lbs. static load
• 7,000lbs. lift capacity
• 15" lift
• 13-1/2" dropleg travel
• 20.75" retracted height
• Topwind jack

 

Product Code: 190704 Product Price: $99.95 Product Weight: 27.00 pounds

More Information and Pricing
Hammer Blow Dropleg Trailer Jack

• Prime Paint Outer Leg, Zinc Plated Inner Leg and Drop Tube
• Static Load: 7,000 lbs.
• Lift Capacity: 5,000 lbs.
• Lift: 15"
• Dropleg Travel: 13-1/2"
• Retracted Height: 22.66"
• Topwind
• Outer Tube Measures: 2.53"

 

Product Code: 271000 Product Price: $53.95 Product Weight: 11.00 pounds

More Information and Pricing

For industrial and agricultural applications. Pipe Mount Swivel Trailer Jacks are engineered for the most demanding situations giving superior side-load stability over snap ring jacks.

• 2,000 lbs. capacity
• 10" lift
• 11-1/2" bracket height
• 15" retracted height

Attaches with Weld-On Pipe Swivel Bracket (DL22670).

Atwood Pipe Mount Trailer Jack # 80459

 

Product Code: 6108SW Product Price: $84.95 Product Weight: 25.00 pounds

More Information and Pricing
Shelby Sidewind Dropleg Trailer Jack

• Flat black finish
• Static Load: 8,000 lbs.
• Lift Capacity: 7,000 lbs.
• Lift: 14-1/2"
• Dropleg Travel: 14-1/2"
• Overall dropleg height: 19"
• Retracted Height: 22"
• Maximum Extended Height: 51"
• Sidewind
• Easy grip handle
• Outer Tube Measures: 2-1/2"
• Made in the U.S.A.

 

Product Code: 6108TW Product Price: $84.95 Product Weight: 25.00 pounds

More Information and Pricing
Shelby Dropleg Trailer Jack

• Flat black finish
• Static Load: 8,000 lbs.
• Lift Capacity: 7,000 lbs.
• Lift: 14"
• Dropleg Travel: 14-1/2"
• Overall dropleg height: 19"
• Retracted Height: 26"
• Maximum Extended Height: 51"
• Topwind
• Easy grip handle
• Outer Tube Measures: 2-1/2"
• Made in the U.S.A.

 

Product Code: 5874A8 Product Price: $89.95 Product Weight: 25.00 pounds

More Information and Pricing

Shelby Trailer Jack with large 8" wheel

• 1,500 lbs. capacity
• Offset Swivel Design permits easier access to the nut and bolt on the bolt-thru swivel
• 6 degrees of camber allows the jack to remain centered underneath the trailer tongue, when the jack is fully extended
• Zinc plating and "Super Sealer" combine to produce a great performing finish that will resist corrosion far better than zinc only
• 10" Travel
• Bracket Height: 16-1/2"
• Bolt-on Hardware Included

 

Product Code: 77433 Product Price: $44.95 Product Weight: 9.00 pounds

More Information and Pricing

Lynx RV Leveling Kit with Nylon Bag

Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The leverls can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks.

• (10) Levelers with nylon bag
• Each level block measures 8-1/2" x 8-1/2" x 1-1/2" (thick)
• Each provides 1" of lift
• Made in the U.S.A.

 

Product Code: 70359 Product Price: $21.95 Product Weight: 3.00 pounds

More Information and Pricing

Lynx RV Leveling Kit

Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The leverls can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks.

• (4) Levelers
• Each level block measures 8-1/2" x 8-1/2" x 1-1/2" (thick)
• Each provides 1" of lift
• Made in the U.S.A.

 

Product Code: 74947 Product Price: $14.95 Product Weight: 1.00 pounds

More Information and Pricing

Lynx Stop 'N Chock

The only self-positioning guide. No you'll hit the top of the stack evey time. The perfect accessory for your original Lynx Levelers. Just place the Stop 'N Chock on a stack of Lynx Levelers, butt the stack up the wheels, slowly idle your RV to the top of the stack until you Stop...'n Chock.

• Easy to clean
• Strong and durable
• Safe and easy to use
• Dimensions: 8-1/2" x 8-1/2" x 6"
• Made in the U.S.A.

 

Product Code: 77545 Product Price: $29.95 Product Weight: 2.00 pounds

More Information and Pricing

Lynx Stop 'N Chock

The only self-positioning guide. Now you will hit the top of the stack evey time. The perfect accessory for your original Lynx Levelers. Just place the Stop 'N Chock on a stack of Lynx Levelers, butt the stack up the wheels, slowly idle your RV to the top of the stack until you Stop...'n Chock.

• Includes (2) Stop N Chocks
• Easy to clean
• Strong and durable
• Safe and easy to use
• Dimensions: 8-1/2" x 8-1/2" x 6"

 

Product Code: 86306 Product Price: $18.95 Product Weight: 3.00 pounds

More Information and Pricing

Lynx Leveler Caps

The cap is designed to provide a flat surface to accommodate the many styles of stabilizing pads found on the market today, and can also be used to provide a flat surface while using the Levelers under the wheels. The unique interlocking desing of LynxCap means it will not increase the stack height and ensure a secure fit on your original Lynx Levelers.

• Includes (4) Caps

 

Product Code: DL22300 Product Price: $34.95 Product Weight: 17.20 pounds

More Information and Pricing

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 800 lbs.

When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy-to-install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy-duty D-L tongue jacks reduce physical effort required to maneuver a loaded trailer into hitching position or removing the trailer from a vehicle. All models are made from heavy-gauge steel for strength and durability.

• Capacity: 800 lbs.
• Bolt on mounting
• 10" lift
• Enclosed outer tube retards sand and dirt from contacting miter gears and heavy-duty Acme screw
• Fits channel tongues up to 3" wide x 5" tall
• All mounting hardware included
• 2.5" diameter mounting hole in swivel bracket fits most other brands of mounting hardware
• Floating miter gears allow for proper clearance and easier operation
• Maximum maneuverability from offset swivel caster assembly
• Zinc plated TUFFPLATE finish for longer life
  • Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
• Ergonomic hand grip with textured surface
• 1 year limited warranty

22300 Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 800 lbs. by Dutton-Lainson Model 3400

 

Product Code: DL22685 Product Price: $49.95 Product Weight: 13.00 pounds

More Information and Pricing

Industrial Jack, Side Wind 2,000 lb

• Capacity: 2,000 lbs.
• 10" travel
• 18" overall height
• 11-1/2" bracket height
• Includes weld-on mounting tube, and detent pin
• 3 year limited warranty
• Made in the USA

22685 Industrial Jack, Side Wind by Dutton-Lainson Model 6620

 

Product Code: DL22686 Product Price: $49.95 Product Weight: 14.00 pounds

More Information and Pricing

Industrial Jack, Side Wind 2,000 lb

• Capacity: 2,000 lbs.
• 10" travel
• 18" overall height
• 11-1/2" bracket height
• Includes weld-on bracket, and snap ring
• 3 year limited warranty
• Made in the USA

22686 Industrial Jack, Side Wind by Dutton-Lainson Model 6621

 

Product Code: DL22688 Product Price: $59.95 Product Weight: 17.00 pounds

More Information and Pricing

Industrial Jack, Side Wind 2,000 lb

• Capacity: 2,000 lbs.
• 15" travel
• 27" overall height
• 15" bracket height
• Includes weld-on mounting tube, and detent pin
• 3 year limited warranty
• Made in the USA

22688 Industrial Jack, Side Wind by Dutton-Lainson Model 6623

 

Product Code: DL22689 Product Price: $59.95 Product Weight: 18.00 pounds

More Information and Pricing

Industrial Jack, Side Wind 2,000 lb

• Capacity: 2,000 lbs.
• 15" travel
• 27" overall height
• 15" bracket height
• Includes weld-on bracket, and snap ring
• 3 year limited warranty
• Made in the USA

22689 Industrial Jack, Side Wind by Dutton-Lainson Model 6624

 

Product Code: DL22679 Product Price: $39.95 Product Weight: 13.00 pounds

More Information and Pricing

Industrial Jack, Top Wind 2,000 lb

• Capacity: 2,000 lbs.
• 10 " travel
• 15-1/2" overall height
• 11-1/4" bracket height
• Includes weld-on mounting tube, and detent pin
• 3 year limited warranty
• Made in the USA

22679 Industrial Jack, Top Wind by Dutton-Lainson Model 6630

 

Product Code: DL22680 Product Price: $39.95 Product Weight: 13.00 pounds

More Information and Pricing

Industrial Jack, Top Wind 2,000 lb

• Capacity: 2,000 lbs.
• Includes weld-on bracket, and snap ring
• 10" travel
• 11-3/16" bracket height when fully retracted
  • 21-3/16" when fully extended
• Overall height when retracted is 15-1/2"
• 3 year limited warranty
• Made in the USA

22680 Industrial Jack, Top Wind by Dutton-Lainson Model 6631

 

Product Code: DL22682 Product Price: $49.95 Product Weight: 16.00 pounds

More Information and Pricing

Industrial Jack, Top Wind 2,000 lb

• Capacity: 2,000 lbs.
• 15" travel
• 15-1/2" overall height
• 11-1/4" bracket height
• Includes weld-on mounting tube, and detent pin
• 3 year limited warranty
• Made in the USA

22682 Industrial Jack, Top Wind by Dutton-Lainson Model 6633

 

Product Code: DL22683 Product Price: $48.95 Product Weight: 16.00 pounds

More Information and Pricing

Industrial Jack, Top Wind 2,000 lb

• Capacity: 2,000 lbs
• 15" travel
• 15-1/2" overall height
• 11-1/4" bracket height
• Includes weld-on bracket, and snap ring
• 3 year limited warranty
• Made in the USA

22683 Industrial Jack, Top Wind by Dutton-Lainson Model 6634

 

Product Code: DL22781 Product Price: $39.95 Product Weight: 13.00 pounds

More Information and Pricing

2,000 lb A-frame Trailer Jack

• 2,000 lb. A-frame jack
• 20-1/2" retracted height
• Bracket height is 8" from the bottom
• 14" travel
• Can be welded or bolted to standard A-frame couplers
• Powder coated black finish
• Removable wheel or foot sold separately
• 3 year limited warranty
• Made in the USA

22781 2,000 lb A-frame Jack by Dutton-Lainson Model 6670

 

Product Code: DL22772 Product Price: $39.95 Product Weight: 17.00 pounds

More Information and Pricing

5,000 lb A-Frame Jack

• 5,000 lb A-frame jack
• Can be welded or bolted to standard A-frame couplers
• Powder coated black finish
• Bracket height: 11"
• Lift: 15"
• Retracted height: 21"
• Removable wheel or foot sold separately
• 3 year limited warranty
• Made in the USA

22772 5,000 lb A-Frame Jack by Dutton-Lainson Model 6671

 

Product Code: DL22560 Product Price: $64.95 Product Weight: 22.00 pounds

More Information and Pricing

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1,000 lbs.

When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy-to-install, smooth-operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy duty D-L tongue jacks reduce physical effort required to maneuver a loaded trailer into hitching position or remove the trailer from a vehicle. All models are made from heavy-gauge steel for strength and durability.

• Capacity: 1,000 lbs.
• Bolt on mounting
• 12" lift
• Enclosed outer tube retards sand and dirt from contacting miter gears and heavy duty Acme screw
• Fits square tongues up to 3" x 5"
• All mounting hardware included
• 2-1/2" diameter mounting hole in swivel bracket fits most other brands of mounting hardware
• Floating miter gears allow for proper clearance and easier operation
• Maximum maneuverability from offset swivel caster assembly
• Zinc plated TUFFPLATE finish for longer life
  • Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
• Ergonomic hand grip with textured surface
• 3 year limited warranty
• Made in the USA

22560 Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1,000 lbs. by Dutton-Lainson Model 6709

 

Product Code: DL22580 Product Price: $89.95 Product Weight: 23.00 pounds

More Information and Pricing

Trailer Jack, Sidewind Swivel Jack with 6" Dual Wheel - 1,500 lbs.

When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy to install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy duty D-L tongue jacks reduce physical effort required to maneuver a loaded trailer into hitching position or removing the trailer from a vehicle. All models are made from heavy gauge steel for strength and durability.

• Capacity: 1,500 lbs.
• Bolt on mounting
• 12" lift
• Enclosed outer tube retards sand and dirt from contacting miter gears and heavy duty Acme screw
• Fits square tongues up to 3" x 5"
• All mounting hardware included
• 2-1/2" diameter mounting hole in swivel bracket fits most other brands of mounting hardware
• Floating miter gears allow for proper clearance and easier operation
• Maximum maneuverability from offset swivel caster assembly
• Zinc plated TUFFPLATE finish for longer life
  • Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
• Ergonomic hand grip with textured surface
• 3 year limited warranty
• Made in the USA

22580 Trailer Jack, Sidewind Swivel Jack with 6" Dual Wheel - 1,500 lbs by Dutton-Lainson Model 6800

 

Product Code: DL22800 Product Price: $69.95 Product Weight: 21.00 pounds

More Information and Pricing

Trailer Jack, Sidewind Swivel Jack with 8" Wheel - 1,500 lbs.

When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy to install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy duty D-L tongue jacks reduce physical effort required to maneuver a loaded trailer into hitching position or removing the trailer from a vehicle. All models are made from heavy gauge steel for strength and durability.

• Capacity: 1,500 lbs.
• Bolt on mounting
• 10" lift
• Enclosed outer tube retards sand and dirt from contacting miter gears and heavy duty Acme screw
• Fits square tongues up to 3" x 5"
• All mounting hardware included
• 2-1/2" diameter mounting hole in swivel bracket fits most other brands of mounting hardware
• Floating miter gears allow for proper clearance and easier operation
• Maximum maneuverability from offset swivel caster assembly
• Zinc plated TUFFPLATE finish for longer life
  • Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
• Ergonomic hand grip with textured surface
• 3 year limited warranty
• Made in the USA

22800 Trailer Jack, Sidewind Swivel Jack with 8" Wheel - 1,500 lbs. by Dutton-Lainson Model 6850

 

Product Code: DL22320 Product Price: $69.95 Product Weight: 21.00 pounds

More Information and Pricing

Square Tube Industrial Jack, Side Wind - 2,500 lb

• Square tube
• Capacity: 2,500 lbs
• 15" travel
• 23-1/2" overall height
• 10-1/4 " bracket height from top mounting hole to ground when retracted
• Bolt-on drop leg jack, side wind
• Hardware included
• Zinc plated finish
• Imported then tested to D-L standards
• 1 year limited warranty

22320 Square Tube Industrial Jack, Side Wind - 2,500 lb by Dutton-Lainson Model 7201

 

Product Code: F1413020134 Product Price: $114.95 Product Weight: 17.00 pounds

More Information and Pricing

Features:

• Adjustable mount and swivel system for easy lifting and transport
  • Can be adjusted to any height for mounting
  • Swivels into position simply with the integrated, easy-to-grip pull pin
• Maintenance-free construction
  • Sealed and lubricated, one-piece gearbox eliminates the need for manual lubrication
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
• Twin-track wheels roll independently for easy maneuverability
• Wide wheel base allows for increased stability
• Sidewind handle is made of strong plastic for durability and ease of use
• Optional wheel wedge eliminates the need for a chock
• Bolt-on installation

Specs:

• Application: fits up to 3" x 4" tongues
• Lift height: 10"
• Bracket range of adjustability: 8"
• Wheel diameter: 7"
• Pull pin diameter: 9/16"
• Capacity: 1,600 lbs
• Lifetime limited warranty

Please note: Wheel stop does not come standard.

1413020134 Fulton F2 Marine and Recreational Jack for 3" x 3" and 3" x 4" Frames, Sidewind, Twin Track, 1,600 lbs

 

Product Code: F1413060334 Product Price: $94.95 Product Weight: 17.00 pounds

More Information and Pricing

Features:

• Adjustable mount and swivel system for easy lifting and transport
  • Can be adjusted to any height for mounting
  • Swivels into position simply with the integrated, easy-to-grip pull pin
• Maintenance-free construction
  • Sealed and lubricated, one-piece gearbox eliminates the need for manual lubrication
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
• Twin-track wheels roll independently for easy maneuverability
• Wide wheel base allows for increased stability
• Sidewind handle is made of strong plastic for durability and ease of use
• Optional wheel wedge eliminates the need for a chock
• Weld-on installation

Specs:

• Application: fits up to 3" x 5" tongues
• Lift height: 10"
• Bracket range of adjustability: 8"
• Wheel diameter: 7"
• Pull pin diameter: 9/16"
• Capacity: 1,600 lbs
• Lifetime limited warranty

Please note: Wheel stop does not come standard.

1413060334 Fulton F2 Marine and Recreational Jack for 3" x 5" Frames, Sidewind, Twin Track, 1,600 lbs

 

Product Code: F1413040134 Product Price: $114.95 Product Weight: 16.00 pounds

More Information and Pricing

Features:

• Adjustable mount and swivel system for easy lifting and transport
  • Can be adjusted to any height for mounting
  • Swivels into position simply with the integrated, easy-to-grip pull pin
• Maintenance-free construction
  • Sealed and lubricated, one-piece gearbox eliminates the need for manual lubrication
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
• Wide wheel base allows for increased stability
• Sidewind handle is made of strong plastic for durability and ease of use
• Optional wheel wedge eliminates the need for a chock
• Bolt-on installation

Specs:

• Application: fits 3" x 3" and 3" x 4" tongues
• Lift height: 10"
• Bracket range of adjustability: 8"
• Wheel diameter: 7"
• Pull pin diameter: 9/16"
• Capacity: 1,600 lbs
• Lifetime limited warranty

Please note: Wheel stop does not come standard.

1413040134 Fulton F2 Marine and Recreational Jack for 3" x 3" and 3" x 4" Frames, Sidewind, Wide Track, 1,600 lbs

 

Product Code: F1413050334 Product Price: $94.95 Product Weight: 16.00 pounds

More Information and Pricing

Features:

• Adjustable mount and swivel system for easy lifting and transport
  • Can be adjusted to any height for mounting
  • Swivels into position simply with the integrated, easy-to-grip pull pin
• Maintenance-free construction
  • Sealed and lubricated, one-piece gearbox eliminates the need for manual lubrication
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
• Wide wheel base allows for increased stability
• Sidewind handle is made of strong plastic for durability and ease of use
• Optional wheel wedge eliminates the need for a chock
• Weld-on installation

Specs:

• Application: fits 3" x 5" tongues
• Lift height: 10"
• Bracket range of adjustability: 8"
• Wheel diameter: 7"
• Pull pin diameter: 9/16"
• Capacity: 1,600 lbs
• Lifetime limited warranty

Please note: Wheel stop does not come standard.

1413050334 Fulton F2 Marine and Recreational Jack for 3" x 5" Frames, Sidewind, Wide Track, 1,600 lbs

 

Product Code: F092806100 Product Price: $34.95 Product Weight: 5.00 pounds

More Information and Pricing

Features:

• Adjustable mount and swivel system for easy lifting and transport of Fulton swing-up trailer jacks
• Weld-on installation
• Corrosion-resistant coating

Specs:

• Fits 3" x 5" tongues

0928061-00 Fulton Weld-On Mounting Bracket and Hardware for up to 3" x 5" Frames

 

Product Code: F092806300 Product Price: $34.95 Product Weight: 5.00 pounds

More Information and Pricing

Features:

• Adjustable mount and swivel system for easy lifting and transport of Fulton swing-up trailer jacks
• Bolt-on installation
• Corrosion-resistant coating

Specs:

• Fits 3" x 4" tongues

092806300 Fulton Bolt-On Mounting Bracket and Hardware for 3" x 4" Frames

 

Product Code: FRV20000103 Product Price: $28.95 Product Weight: 12.00 pounds

More Information and Pricing

Features:

• Utility jack attaches to A-frame trailer
• Sidewind handle
• Black paint finish

Specs:

• Bracket height:
  • 8" Retracted
  • 22" Extended
• Travel length: 14"
• Tubing: 2" diameter
• Lift capacity: 2,000 lbs
• Limited 3-year warranty

RV2000 Fulton A-Frame Utility Trailer Jack - Round, Sidewind, 2,000 lbs

 

Product Code: FEA20000103 Product Price: $19.95 Product Weight: 11.00 pounds

More Information and Pricing

Features:

• Utility jack attaches to A-frame trailer
• Topwind handle
• Black paint finish

Specs:

• Bracket height:
  • 8" Retracted
  • 22" Extended
• Travel length: 14"
• Tubing: 2" diameter
• Lift capacity: 2,000 lbs
• Limited 3-year warranty

EA2000 Fulton A-Frame Utility Trailer Jack - Round, Topwind, 2,000 lbs

 

Product Code: F1400600327 Product Price: $26.95 Product Weight: 12.00 pounds

More Information and Pricing

Features:

• Utility jack attaches to A-frame trailer
• Topwind handle
• Black paint finish

Specs:

• Bracket height:
  • 10.8" Retracted
  • 25.8" Extended
• Travel length: 15"
• Tubing: 2" diameter
• Lift capacity: 5,000 lbs
• Limited 3-year warranty

140060 Fulton A-Frame Utility Trailer Jack - Round, Topwind, 5,000 lbs

 

Product Code: F1400300327 Product Price: $34.95 Product Weight: 14.00 pounds

More Information and Pricing

Features:

• Convenient spring-loaded, pull pin swivel feature
• Bolt-on installation
• Topwind handle
• Includes bolt-on mounting hardware
• Black paint finish

Specs:

• Bracket height:
  • 11" Retracted
  • 21" Extended
• Travel length: 10"
• Tubing: 2" diameter
• Lift capacity: 2,000 lbs
• Limited 3-year warranty

140030 Fulton Bolt-On Retaining Ring Swivel Utility Trailer Jack - Round, Topwind, 2,000 lbs

 

Product Code: F1400200327 Product Price: $34.95 Product Weight: 14.00 pounds

More Information and Pricing

Features:

• Convenient spring-loaded, pull pin swivel feature
• Weld-on installation
• Topwind handle
• Includes weld-on mounting bracket
• Black paint finish

Specs:

• Bracket height:
  • 11" Retracted
  • 21" Extended
• Travel length: 10"
• Tubing: 2" diameter
• Lift capacity: 2,000 lbs
• Limited 3-year warranty

140020 Fulton Weld-On Retaining Ring Swivel Utility Trailer Jack - Round, Topwind, 2,000 lbs

 

Product Code: F1400400327 Product Price: $34.95 Product Weight: 14.00 pounds

More Information and Pricing

Features:

• Superior side-load stability for demanding jobs
• Weld-on installation
  • Includes weld-on mounting tube and retention pin
• Topwind handle
• Black paint finish

Specs:

• Bracket height:
  • 11" Retracted
  • 21" Extended
• Travel length: 10"
• Tubing: 2" diameter
• Lift capacity: 2,000 lbs
• Limited 3-year warranty

140040 Fulton Tubular Swivel Utility Trailer Jack - Round, Topwind, 10" Travel Length, 2,000 lbs

 

Product Code: F1400500327 Product Price: $39.95 Product Weight: 16.00 pounds

More Information and Pricing

Features:

• Superior side-load stability for demanding jobs
• Weld-on installation
  • Includes weld-on mounting tube and retention pin
• Topwind handle
• Black paint finish

Specs:

• Bracket height:
  • 14-1/2" Retracted
  • 29-1/2" Extended
• Travel length: 15"
• Tubing: 2" diameter
• Lift capacity: 2,000 lbs
• Limited 3-year warranty

140050 Fulton Tubular Swivel Utility Trailer Jack - Round, Topwind, 15" Travel Length, 2,000 lbs

 

Product Code: FSJL80300 Product Price: $23.95 Product Weight: 9.00 pounds

More Information and Pricing

Features:

• Drop-leg jack is great for quick load leveling and stabilizing
  • Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place
• Zinc plating offers corrosion resistance
• Steel construction is strong and durable
• Includes weld-on mounting channel

Specs:

• Drop-leg length: 20"
• Height adjustment range: 8" - 27"
• Outer tube dimensions: 1-1/2" wide x 8" long
• Capacity: 2,000 lbs

SJL80300 Fulton Assembly Drop Leg Stabilizer Jack, 8" to 27" Range

 

Product Code: FSJ10300 Product Price: $14.95 Product Weight: 5.00 pounds

More Information and Pricing

Features:

• Tube pairs with drop leg to create stabilizer jack
  • Fulton Square Drop Leg for Stabilizer Jack, 28-3/4" Long (# FSJ20324)
  • Fulton Square Drop Leg for Stabilizer Jack, 20" Long (# FSJ40324)
• Zinc plating offers corrosion resistance
• Steel construction is strong and durable
• Oil finish for weld-on installation

Specs:

• Dimensions: 2" wide x 13" long
• Capacity (when paired with drop leg): 3,000 lbs

SJ10300 Fulton 2" Wide Square Outer Tube for Stabilizer Jack, 13" Long

 

Product Code: FSJ20324 Product Price: $27.95 Product Weight: 7.00 pounds

More Information and Pricing

Features:

• Drop leg pairs with weld-on outer tube (sold separately) to create stabilizer jack
  • Fulton Weld-On Square Outer Tube for Stabilizer Jacks, 13" Long (# FSJ10300)
• Zinc plating offers corrosion resistance
• Steel construction is strong and durable

Specs:

• Length: 28-3/4"
• Height adjustment range: 25" to 37"
• Capacity (when paired with outer tube): 3,000 lbs

SJ20324 Fulton Square Drop Leg with Adjustment Holes for Stabilizer Jack, 28-3/4" Long

 

Product Code: FSJ40324 Product Price: $24.95 Product Weight: 5.00 pounds

More Information and Pricing

Features:

• Drop leg pairs with weld-on outer tube (sold separately) to create stabilizer jack
  • Fulton Weld-On Square Outer Tube for Stabilizer Jacks, 13" Long (# FSJ10300)
• Zinc plating offers corrosion resistance
• Steel construction is strong and durable

Specs:

• Length: 20"
• Height adjustment range: 18" to 28"
• Capacity (when paired with outer tube): 3,000 lbs

SJ40324 Fulton Square Drop Leg with Adjustment Holes for Stabilizer Jack, 20" Long

 

Product Code: F770203 Product Price: $29.95 Product Weight: 5.00 pounds

More Information and Pricing

Features:

• Jack folds up for storage during travel and pulls down for use
• Ratcheting style makes for easy raising and lowering
• Zinc plating with clear finish offers corrosion resistance
• Steel construction is strong and durable
• Optional handle makes operating the jack even easier - sold separately
• Made in the USA

Specs:

• Height adjustment range: 11-1/8" to 18-3/4"
• Capacity: 300 lbs

770203 Fulton Clear Zinc Stabilizer Jack, 11-1/8" to 18-3/4" Range

 

Product Code: F1410020303 Product Price: $28.95 Product Weight: 5.00 pounds

More Information and Pricing

Features:

• Jack folds up for storage during travel and pulls down for use
• Ratcheting style makes for easy raising and lowering
• Zinc plating with black-paint finish offers corrosion resistance
• Steel construction is strong and durable
• Optional handle makes operating the jack even easier - sold separately
• Made in the USA

Specs:

• Height adjustment range: 11-1/8" to 18-3/4"
• Capacity: 300 lbs

1410020303 Fulton Black-Painted Stabilizer Jack, 11-1/8" to 18-3/4" Range

 

Product Code: F780201 Product Price: $3.95 Product Weight: 1.00 pounds

More Information and Pricing

Features:

• Convenient handle is designed for ratcheting-style stabilizer mechanism
• Clear zinc finish offers corrosion resistance
• Made in the USA

780201 Fulton Clear Zinc Stabilizer Handle

 

Product Code: F7720101 Product Price: $54.95 Product Weight: 11.00 pounds

More Information and Pricing

Features:

• Jack folds up for storage during travel and pulls down for use
• Ratcheting style makes for easy raising and lowering
• Zinc plating with clear finish offers corrosion resistance
• Steel construction is strong and durable
• Complete set includes 2 jacks and 1 handle
• Made in the USA

Specs:

• Height adjustment range: 11-1/8" to 18-3/4"
• Capacity: 300 lbs (each)

77220101 Fulton Clear Zinc Pair of Stabilizer Jacks with Handle, 11-1/8" to 18-3/4" Range

 

Product Code: FSJ1-SJ2 Product Price: $39.95 Product Weight: 12.00 pounds

More Information and Pricing

Features:

• Drop-leg jack is great for quick load leveling and stabilizing
  • Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place
• Zinc plating offers corrosion resistance
• Steel construction is strong and durable
• Kit includes outer tube with oil finish and square drop leg with adjustment holes
• Weld-on installation

Specs:

• Drop-leg length: 28-3/4"
• Height adjustment range: 25" - 37"
• Outer tube dimensions: 2" wide x 13" long
• Capacity: 3,000 lbs

SJ1-SJ2 Fulton Drop Leg Stabilizer Jack Kit, 25" to 37" Range

 

Product Code: FSJ1-SJ4 Product Price: $36.95 Product Weight: 10.00 pounds

More Information and Pricing

Features:

• Drop-leg jack is great for quick load leveling and stabilizing
  • Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place
• Zinc plating offers corrosion resistance
• Steel construction is strong and durable
• Kit includes outer tube with oil finish and square drop leg with adjustment holes
• Weld-on installation

Specs:

• Drop-leg length: 20"
• Height adjustment range: 18" - 28"
• Outer tube dimensions: 2" wide x 13" long
• Capacity: 3,000 lbs

SJ1-SJ4 Fulton Drop Leg Stabilizer Jack Kit, 18" to 28" Range

 

Product Code: 22624 Product Price: $72.95 Product Weight: 15.00 pounds

More Information and Pricing

Suspension Pro Rigid-Top Mount Trailer Jack

• Capacity: 800 lbs
• Lift: 18-3/8"
• Maximum tongue height: 26"

 

Product Code: F0933306S00 Product Price: $10.99 Product Weight: 1.00 pounds

More Information and Pricing

Fulton Bevel Gear Kit

• Complete kit includes gears, roll pins, washers and a handle bushing
• Replacement parts fit Fulton marine and recreational jacks
  • Model numbers: TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15, XPF15L

0933306S00 Fulton Replacement Gear Kit