Bike Rack Anti-Rattle

Product Code: 63201 Product Price: $29.95 Product Weight: 3.00 pounds

More Information and Pricing

Draw-Tite J-Pin locking anti-rattle device for 2" trailer hitch receivers

• Feel secure with theft-preventing lock and rattle free noise
• Ideal for bike carriers and hitch mounted cargo carriers
• Draw-Tite J-Pin compatible hitch required (See Below)
• Packaged complete with J-Pin, lock and 2 keys, wrench (Pictured Below), and Cap
• Works with hollow or solid shank ball mounts and hitch accessories

Draw-Tite's exclusive J-Pin ready receiver design allows for the most confident and secure hookup in today's towing market by compressing the hitch mounted accessory against the inner side wall of the hitch receiver tube. Once attached, the hitch and towing components seem virtually welded together.

Draw-Tite's J-Pin quickly and confidently secures ball mounts and other hitch mounted accessories, eliminating the sway and rattle caused by necessary part clearance issues.

J-Pin Installed	J-Pin Compatible Hitch

Similar to 7651; Replaces 8322

 

Product Code: F-315 Product Price: $13.95 Product Weight: 1.00 pounds

More Information and Pricing
Anti-Rattle Kit for 1-1/4" x 1-1/4" trailer hitches

• Note: The shank of the ball mount, cargo carrier, bike rack etc. must be hollow.
• The block with nut is placed inside the ball mount (or hitch accessory) and drawn to the side of the hitch tube when the pin is tightened. This pushes the ball mount or hitch accessory up against the side of the hitch tube, dramatically reducing movement and vibration.

 

Product Code: A30901LHP Product Price: $29.95 Product Weight: 1.00 pounds

More Information and Pricing

Anti-Rattle with Lock for Sportrack and Valley Bike Racks with Built-in Anti-Rattle System

• Works on 1-1/4" and 2" bike racks.

 

Product Code: A32022 Product Price: $49.95 Product Weight: 3.00 pounds

More Information and Pricing

Anti-Rattle and Cable Lock for Sportrack and Valley Bike Racks with Built-in Anti-Rattle System

• Works on 1-1/4" x 1-1/4" and 2" x 2" bike racks.
• Cable lock measures 37" long
• Cable lock and Anti-Rattle lock are keyed alike.

Installation: The cable lock is installed by first taking off the plastic end cap on the bar of the bike rack-either upright bar w/hooks (a30901/a30902) or arm of a dual arm carrier (a30403/a30404). Punch out the holes on the cap and then reinstall. Next slide the cable lock in though the end of the bar (as pictured below), starting with the end opposite the lock. Once the cable is a few inches into the bar of the bike rack, insert the black (or silver) pin through the 2 side holes. The bar is used to keep the cable from coming back out and also as an attachment point for the lock. The included clip is used to hold the pin in place.

 

Product Code: THSTL2 Product Price: $44.95 Product Weight: 2.00 pounds

More Information and Pricing

Thule Snug Tite Lock and Anti-Rattle Device

• Integrated dust cover keeps lock clean
• Thule One Key System compatible
• Can be keyed alike with other Thule One Key System locks. Keyed alike locking cylinders are available in packs of 2, 4, 6, 8 and 10. See related items below.
• Works on both 1-1/4" and 2" Thule hitch mounted racks.
• Fits Thule Parkway (#s TH956, TH957 and TH958), Revolver (# TH964), Ridgeline (# TH954), Roadway (#s TH914, TH912, TH915), and T2 (#s TH916, TH917) series of bike racks.
• Also fits Thule discontinued hitch mounted bike racks--Hitching Post Pro (#s TH934XT, TH935XT, TH936XT, TH937XT, TH951XT), Expressway (#s TH995XT, TH996XT) and Trailblazer (# TH998XT).

Replaces Thule # THSTL

 

Product Code: 63232 Product Price: $24.95 Product Weight: 2.00 pounds

More Information and Pricing

Features:

• Fits 2" x 2" trailer hitches
  • Pin diameter: 5/8"
  • Overall length: 6-1/8"
  • Inside width: 2-5/8"
• Acts as an anti-rattle device
• Requires ball mount or hitch accessory to have a hollow shank
• Wrench included

Trailer Hitch Lock and Anti-Rattle Device. Block with spring is placed inside the ball mount and drawn to the side of the hitch tube when the pin is tightened. This pushes the ball mount or hitch accessory up against the side of the hitch tube, dramatically reducing movement and vibration. A great alternative to the J-Pin and there is no need for a second hole.

NOTE: This lock will not work with some factory 2" trailer hitches.

Tow Ready # 63232

Replaces Valley # 76820

 

Product Code: 93347 Product Price: $7.95 Product Weight: 1.00 pounds

More Information and Pricing

No-Rattle Trailer Hitch Wedge by Boone Outdoor Hardware

Don't be fooled by its size. This little wonder has a big job. The Hitch Wedge performs double duty by holding your hitch gear tightly and providing extra security for the hitch pin. Hitch racks will stand stone cold solid with the Hitch Wedge. Install it and forget about it.

• Serves as hitch gear stabilizer
• Wedges itself between the receiver and hitch gear to take up play and eliminate irritating rattle
• Holds hitch pin tight
• Is easier to use and less expensive than other stabilizers
• Doubles as anti-theft device
• Carbon steel construction
• For 1-1/4" x 1-1/4" and 2" x 2" trailer hitches

Note: Will not work with trailer hitch locks that sit flush against the outside of the hitch receiver. Will not work on Ford Edge vehicles with a factory installed 1-1/4" trailer hitch.

93347 2" and 1-1/4" No-Rattle Hitch Wedge by Boone Outdoor Hardware

 

Product Code: 63145-1 Product Price: $10.55 Product Weight: 1.00 pounds

More Information and Pricing

• Fits 2" x 2" trailer hitches
• Fits 5/8" diameter hole
• Acts as an anti-rattle device
• Requires hitch accessory to have a hollow shank
  • Not recommended for use when towing a trailer

Trailer Hitch Pin and Anti-Rattle Device. Block with spring is placed inside the hitch accessory (bike rack or cargo carrier) and drawn to the side of the hitch tube when the pin is tightened. This pushes the hitch accessory up against the side of the hitch tube, dramatically reducing movement and vibration.

 

Product Code: S64027 Product Price: $24.95 Product Weight: 1.00 pounds

More Information and Pricing

5/8" Locking Anti-Wobble, Threaded Hitch Pin for 2" Receiver

Using anti-wobble technology, the threaded pin pulls the Swagman hitch rack shank to one side of the hitch receiver, preventing movement during travel. Tubular high-security keys allow easy access with only a quarter turn to unlock. It is also triple chrome-plated for maximum rust protection.

Features:

• Secures 2" Swagman rack with anti-wobble shank inside a receiver tube
• Anti-wobble technology pulls the receiver bar tight to one side of the hitch and helps eliminate rattling
• Helps protect racks from theft
• Tubular high-security keys allow easy access with only a quarter turn to unlock
• Triple chrome-plated for maximum rust protection

Specs:

• 5/8" diameter locking hitch pin for 2" trailer hitches
  • Inside width: 3-7/16"
• 2 keys included

64027 Swagman 5/8" Locking Anti-Wobble, Threaded Hitch Pin for 2" Receiver

 

Product Code: SR25219 Product Price: $33.29 Product Weight: 1.00 pounds

More Information and Pricing

Features:

• Eliminates the "clanking" noise associated with hitch accessories
  • Small, anti-rattle nut insert fits inside the ball mount, bike rack or cargo carrier
  • Stainless steel threaded pin pulls the nut securely to the side of the receiver tube, reducing excess space between tube and ball mount
• Protects the vehicle's powertrain by preventing the jerking motion that happens when starting and stopping while towing
• Includes brass lock with rubber dust cover to block out debris

Specs:

• Pin diameter: 5/8"
• Inside width of lock: 3-1/2"
• Compatibility: fits 2" ball mounts, bike racks and cargo carriers with a hollow shank
• Number of keys included: 2
• Limited lifetime warranty

This hitch pin's unique design improves the towing experience by protecting the vehicle's powertrain and safely minimizing that annoying "clanking" sound. Engineered to fit 2" ball mounts, it features an anti-rattle nut enclosure that slides inside the ball mount. A 5/8" stainless steel threaded pin clinches the nut securely to the side of the receiver tube, reducing "wiggle room" between the tube and the ball mount. To prevent theft, the hitch pin includes a brass lock with a rubber dust cover to block out debris.

The insert piece fitted with a nut slides inside the ball mount or any other hitch accessory with a hollow shank. The pin clinches the nut securely to the side of the receiver tube to reduce excess slack between the tube and the ball mount.

25219 Softride Locking, Anti-Rattle Hitch Pin

 

We have also put together some detailed bike rack information that gives an overview and explains the different types of bike racks and accessories that are available. Bike rack videos, reviews, and information articles