20x48 Cargo Carrier For 1-1/4" Trailer Hitch Receiver
 |
Product Code: 52017
Product Price: $159.95
Product Weight: 49.00 pounds |
More Information and Pricing
- Features:
-
- Rust resistant powder coat finish
- 20" x 48" large platform (inside the rails)
- Includes 5-1/2" side rails with rounded corners
- Provides multiple anchor points
- Hitch pin and clip sold separately
- Made in USA
- Specs:
- Weight Capacity: 300 lbs
- Capacity is limited by the tongue weight capacity of the hitch
- Measures 6-1/4" from the center of the pin hole to back of the basket
- Assembly bolts together in minutes
- Fits 1-1/4" x 1-1/4" Class I and Class II trailer hitches
- Overall Dimensions: 21-1/2" x 49-1/2"
Surco # 1201
Old Hidden Hitch # 52017
20x48 Cargo Carrier Fits 1-1/4" Trailer Hitch Receiver Hitch
 |
Product Code: 6500
Product Price: $148.95
Product Weight: 49.00 pounds |
More Information and Pricing
Hitch mounted cargo carrier. 20" x 48" platform. Fits 1-1/4" x 1-1/4" receivers. 300 lb. capacity.
- Features:
-
- Adjustable fore and aft for best fit
- Maximum distance measures 11-1/4" from the center of the pin hole to the edge of the cargo carrier
- Mesh floor for easy cleanup
- 3" Side rails to retain cargo
- Attachment holes for load securing devices
- Angled design for maximum ground clearance
- Black powder coat finish resists corrosion
- Can be used with the bike adapter bar (part #6505)
- Comes with pin and clip
- Specs:
-
- Angled shank raises platform 3"
- Platform can be adjusted from 5-1/4" to 11-1/4" away from the center of the hitch pin hole
- Adjustments can be made in 2" increments
- Capacity: 300 lbs
- 1-1/4" shank is solid
Adjustable Fore and Aft for Best Fit
The top picture shows a bottom view of the cargo carrier where the Receiver Arm is adjusted for a minimum distance between the bumper and the cargo carrier. The bottom picture shows the maximum distance. The maximum distance measures 11" from the center of the pin hole to the back edge of the cargo carrier.
|
Bike Adapter For Draw-Tite and Reese Cargo Carriers
 |
Product Code: 6505
Product Price: $58.95
Product Weight: 5.00 pounds |
More Information and Pricing
Bicycle Adapter attaches to cargo carrier using supplied hardware. Used to carry up to 4 bikes.
- Bike Adapter will ONLY work with Draw-Tite 6500 and 6501 trailer hitch mounted cargo carriers.
- When using on 1-1/4" carrier (# 6500), due to the length of the carrier (48"), only childrens bikes (20" tires or less) can be carried.
Cargo Carrier Light Kit For 52017 and 52018
 |
Product Code: 52014
Product Price: $41.21
Product Weight: 7.00 pounds |
More Information and Pricing
Cargo Carrier Light Kit for Surco Cargo Carriers
Great for making sure people see the cargo carrier sticking out behind your vehicle. May be required if cargo blocks the vehicle's taillights.
- No-Drill design clamps around the upright post on the rails of the carrier
- Fits Cargo Carriers 52017 and 52018
- Off-set Y-harness - one lead measures about 3'
- On vehicles where the 4-pole trailer connector is tucked under the vehicle, a 4-pole extension may be required to connect the two plugs. See 'related items' below.
Cargo Carrier Stretch Net
 |
Product Code: 7330
Product Price: $24.95
Product Weight: 1.50 pounds |
More Information and Pricing
Stretch net used to secure loads on Classic Innovations, Draw-Tite, Hidden Hitch, Reese, Rola, Tow Ready and Valley trailer hitch mounted cargo carriers.
- Dimensions: 30" x 48" (unstretched)
- Approximately 60" x 84" (stretched)
- Fits Classic Innovations Cargo Carriers: C221
- Fits Draw-Tite Cargo Carriers: 6500, 6501, 6502, 7507
- Fits Hidden Hitch and Surco Cargo Carriers: 52018 and 52017
- Fits Rola Cargo Carriers: 59500
- Fits Tow Ready Cargo Carriers: 63153, 63155
- Fits Valley Cargo Carriers: V90590, V91180, V90180, V90190
- Fits Sportrack Cargo Carriers: A30850
Draw-Tite Cargo Carrier Light Kit
 |
Product Code: 6504
Product Price: $37.95
Product Weight: 3.00 pounds |
More Information and Pricing
Optional light kit. Includes license plate repositioning bracket and 4-wire flat connector
- Light Kit for Draw-Tite Cargo Carriers: 6500, 6501, 6502
Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers
 |
Product Code: 20174
Product Price: $30.87
Product Weight: 3.00 pounds |
More Information and Pricing
Light kit for Draw-Tite and Rola Railed Cargo Carriers.
- Fits Draw-Tite #40101, Rola #59502 and 59507, and Tow Ready #63153 and #63155 trailer hitch mounted cargo carriers
- Off-set Y-harness - one lead measures about 3'
Light Kit Installation
Step 1
Mount rubber grommets on both sides of cargo carrier tray making sure grommets are seated securely.
Step 2
Press tail lamps into grommets until seated securely on both sides of carrier tray.
Step 3
Route plug with green wire under cargo carrier to the passenger side (right) and plug into cargo carrier tail lamp.
Route plug with yellow wire under cargo carrier to the driver side (left) and plug into cargo carrier tail lamp.
Step 4
With supplied cable ties, secure all wiring to the bottom of the cargo carrier.
Please note: With the off-set Y-harness, one wire lead (about 3' long) is run straight to a light, the other lead (about 6' long) is run along the back edge of the carrier before it curves up to the second light. On the 40101 and 59502 cargo carriers, the wires come up through the carriers' mesh floor to attach to the back of the lights. On the Tow Ready carriers 63153 and 63155, the tighter mesh floor is not large enough for the plug to pass through. Therefore run the wire leads under the platform to the lights, then up the front of the carrier and around to the back of the light. This also helps prevent the wires from getting pinched by the cargo. On vehicles where the 4-pole trailer connector is tucked under the vehicle, a 4-pole extension may be required to connect the two plugs. See 'related items.'
20x48 Cargo Carrier for 1-1/4" (Class II Only) Trailer Hitches
 |
Product Code: 63155
Product Price: $148.95
Product Weight: 45.00 pounds |
More Information and Pricing
- Features:
-
- Raised shank elevates carrier platform for better ground clearance
- Stylish design
- Black powder coat finish resists rust and corrosion
- Optional light kit available
- Capacity: 300 lbs.
- Specs:
-
- Fits 1-1/4" x 1-1/4" Class II trailer hitches
- Measures 11" from the center of the hitch pin hole to the carrier platform
- Bend in support arm raises platform 3" from the top of the 1-1/4" x 1-1/4" hitch opening
- Inside Dimensions: 20" (width) x 47-7/8" (length) x 5-1/2" (rails)
- Overall Dimensions: 21-1/2" (width) x 49-1/2" (length) x 5-1/2" (rails)
- Weight Capacity: 300 lbs
- 3 piece design requires assembly
- Pin and clip sold separately
LED Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers
 |
Product Code: 98174LED
Product Price: $49.95
Product Weight: 2.00 pounds |
More Information and Pricing
LED Light kit for Draw-Tite and Rola Railed Cargo Carriers.
- Fits Draw-Tite #40101, Rola #59502, and Tow Ready #63153 and #63155 trailer hitch mounted cargo carriers
- LED's are brighter than conventional lights
- Never replace a bulb again, 100% Maintenance Free
- Uses 12 LED with faceted mirror gleam reflector for superior look
Light Kit Installation
Step 1
Mount rubber grommets on both sides of cargo carrier tray making sure grommets are seated securely.
Step 2
Press tail lamps into grommets until seated securely on both sides of carrier tray.
Step 3
Route plug with green wire under cargo carrier to the passenger side (right) and plug into cargo carrier tail lamp.
Route plug with yellow wire under cargo carrier to the driver side (left) and plug into cargo carrier tail lamp.
Step 4
With supplied cable ties, secure all wiring to the bottom of the cargo carrier.
Please note: With the off-set Y-harness, one wire lead (about 3' long) is run straight to a light, the other lead (about 6' long) is run along the back edge of the carrier before it curves up to the second light. On the 40101 and 59502 cargo carriers, the wires come up through the carriers' mesh floor to attach to the back of the lights. On the Tow Ready carriers 63153 and 63155, the tighter mesh floor is not large enough for the plug to pass through. Therefore run the wire leads under the platform to the lights, then up the front of the carrier and around to the back of the light. This also helps prevent the wires from getting pinched by the cargo. On vehicles where the 4-pole trailer connector is tucked under the vehicle, a 4-pole extension may be required to connect the two plugs. See 'related items.
20x36 Cargo Carrier for 1-1/4" Trailer Hitches - Designed for ATV's
 |
Product Code: TR65855
Product Price: $137.95
Product Weight: 35.00 pounds |
More Information and Pricing
Cargo Carrier for ATV's with 1-1/4" Square Receivers by Tow Ready
- Extend ATV carrying capacity
- Weight capacity: 50 lbs for ATV's and 150 lbs. for vehicles
- Overall Platform Dimensions: 36" long x 20-1/8" wide x 3" tall
- Inside Platform Dimensions: 35-3/4" long x 19-7/8" wide x 2-3/4" tall
- Fits 1-1/4" square trailer hitch receivers
- Fits behind most ATV's with a 1-1/4" hitch
- Shank raises up to provide excellent ground clearance
- Provides a 5" rise from the top of the hitch receiver opening
- Distance from the center of the hitch pin hole to the closest edge of the carrier is adjustable from 5-1/2" to 11"
- Optional side rails are available to offer more gear support and easier tie down
65855 Cargo Carrier for ATV's with 1-1/4" Square Receivers by Tow Ready
Rail Kit for 20x36 ATV Cargo Carriers
 |
Product Code: TR65856
Product Price: $85.95
Product Weight: 5.00 pounds |
More Information and Pricing
Rail Kit for ATV Cargo Carrier by Tow Ready
- More security for your luggage or camping gear
- Also provides additional tie down pionts
- Use with Tow Ready Cargo Carrier TR65852 or TR65855 (each sold separately)
Rail Kit installed on ATV Cargo Carrier # TR65852 also fits 1-1/4" models # TR65855
65856 Rail Kit for ATV Cargo Carrier by Tow Ready
Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier - Tilting
 |
Product Code: TH665C
Product Price: $476.95
Product Weight: 70.00 pounds |
More Information and Pricing
Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier
The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier is a rugged yet affordable hitch mounted cargo carrier with a great look and great price. The carrier simply slides into existing 1-1/4" (Class II only) or 2" receiver hitches and makes loading and unloading your gear easy and convenient as it's done at lower height. Having the carrier in the back of the vehicle is also more fuel efficient than a roof mounted carrier. With its tilt-down design, you can easily access the back of your vehicle in seconds. The carrier includes a lock to secure the items inside it. Included is a license plate light with holder and pre-wired taillights with a standard four-pin trailer connector ready to plug in and go. Carries up to 13 cu. ft. and 150 lbs. A plug/valve in the bottom of the cargo carrier makes clean up quick and easy.
Features:
- Mounts to existing trailer hitch
- Carrier can tilt down to give more access to the rear of the vehicle
- Lid locks in the open position for easy loading and unloading
- Includes pre-wired taillights with standard four-pole flat connector ready to plug in and go
- License plate holder with light is included
- Cargo can be locked inside of cargo box - lock included
- One Key Locking System in place for cargo box allows you to match locks with other Thule racks
- (1) Lock Cylinder required to lock gear in carrier
- Hitch lock (# THSTL2) sold separately
- Solid, ABS construction is built to withstand rough conditions associated with travel
- Plug/valve makes clean-up easy
- Lifetime limited warranty
- Made in the USA
Specs:
- Works with 1-1/4" (Class II only) and 2" trailer hitch receivers
- Cargo box dimensions: 50.5" x 25.5" x 24"
- Inside dimensions: 48-1/2" long x 23-1/3" high x 24-1/2" wide
- Holds 13 cubic feet
- Weight Capacity: 150 lbs
- Measures 7-1/2" from the center of the hitch pin hole to the back of the pivot point upright bar
Please Note: Due to the size of this item it ships via truck freight. Additional fees apply. From the drop down list above, please select if the item will be shipped to a residential or business address. Item ships to the contiguous 48 states only.
665C Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier
Replaces Thule #s TH665 and TH664
Rola Enclosed Cargo Carrier for 1-1/4" (Class II) Trailer Hitches
 |
Product Code: 59108
Product Price: $519.95
Product Weight: 88.00 pounds |
More Information and Pricing
Rola Enclosed Cargo Carrier for 1-1/4" Trailer Hitch Receivers
The multi-purpose storage container is removable to help carry or store your gear while the weather resistant durable design protects it. The carrier is 20 percent larger than comparable models.
Features:
- 150 lbs. capacity
- Tray can be used without the container
- Enclosed container holds 13-1/2 cubic feet of gear
- Light weight container weighs only 30 lbs.
- Container and cargo can be removed from the tray
- Container is secured to the tray with locking latches
- The lid of the container also locks with the same keys that secure the container to the tray
- Weather resistant
- Includes license plate mounting points
- Includes light kit
Specs:
- For use with Class II 1-1/4" x 1-1/4" trailer hitches
- Outer Dimensions of Tray and Pod
- 53" Length x 27" Width x 21-1/2" Tall
- Dimensions of Tray Only
- 53" Length x 27" Width x 5.4" Tall
- Outer Dimensions of the Pod Only
- 53" Length x 27" Width x 19" Tall
- Distance from center pin hole to edge of carrier: 10-3/4"
- Inner Dimensions of the Pod Only
- Bottom of Pod: 47" Length x 21" Width
- Pod is widest in the middle: 52" Length x 26-1/2" Width
- Pod Opening is 46" long and 20" wide
- Inside of Pod is about 17" tall
23x56 Railed Cargo Carrier for 1-1/4" (Class II) Trailer Hitches
 |
Product Code: 59507
Product Price: $211.95
Product Weight: 69.00 pounds |
More Information and Pricing
Rola Trailer Hitch Mounted Railed Cargo Carrier
- Features:
-
- Raised (2") shank elevates carrier platform for better ground clearance
- Attachment points for license plate relocation (if necessary)
- Stylish design
- Black powder coat finish resists rust and corrosion
- Optional light kit available
- Specs:
-
- Fits 1-1/4" x 1-1/4" (Class II only) trailer hitches
- Inside Dimensions: 22" x 55" x 4-3/4" (rails)
- Overall Dimensions: 24" x 61" x 5-1/4" (rails)
- Distance from center of hitch pin hole to back of carrier: 9"
- Pin and clip sold separately
- Capacity: 300 lbs.
Cargo carrier's 1-1/4" shank
