1-1/4" Hitch Opening Bike Racks

Filter 1-1/4" hitch racks by...

Class I
1-1/4" Hitch Opening Racks

Product Code: A30901 Product Price: $134.95 Product Weight: 30.00 pounds

SportRack Folding Trailer Hitch Mounted 2 Bike Carrier

Features:

• Fits both 1-1/4" x 1-1/4" (Class II Only) and 2" x 2" trailer hitches
• Carries up to 2 Bikes
• Works with most alternative and larger tubed frame bikes
  • Will not work with recumbent bikes or bikes with an extra long wheel base
• Bike is secured at 3 points - both tires and the frame
• Powder coated to resist corrosion
• Rubberized hooks protect the finish on the bikes
  • Hooks are also offset making it easier to grab bikes of similar height
• Center pole tilts down to the side to allow easy access to the inside bike
• Bike rack arms fold up, taking up less space in the rear of the vehicle when not in use
• Shank is angled up for better ground clearance
• Includes anti-rattle device
• Includes bolt and lock washer to secure bike rack to hitch

Specs:

• Measures 12" from the center of the hitch pin hole to the closest wheel mount
• Wheel Mounts measure 2-1/2" wide by 14-1/2" long
• Measures 58" center of wheel mount to center of wheel mount (when the wheel mounts are at their widest point)
• Maximum weight capacity: 90 lbs.
• Normal hitch locks are not compatible with this bike rack due to the built-in anti-rattle device.
  • Use A30901LHP hitch lock, or A32022 hitch and cable lock as a keyed-alike option to secure the rack and bikes to the hitch.

Wheel mounts are adjustable to accept bikes with different lengths. Straps secure the wheels into the mounts.

The cushioned hook or cradle allows the carrier to secure many types of bike frames while protecting the bike's finish.

Shank is threaded for anti-rattle bolt.

Valley #V91130

Product Code: S64095 Product Price: $74.95 Product Weight: 20.00 pounds

Standard 2-Bike Rack Ball Hole Mount

The simple design on this original two-bike rack offers riders basic carrier functionality. Its solid steel construction provides lasting toughness. Kraton vinyl cushioning helps protect frames and offers additional gripping power. The top plate accommodates several different frame sizes, and turning knobs secure bikes to the arm. Keep your bikes safe by adding a couple of optional padlocks. This rack attaches to a flat surface with a 3/4" diameter hole, making it great for step bumpers or trailer hitch ballmounts.

Features:

• Carries up to 2 bikes
• Solid steel construction
• Kraton vinyl cushioning helps protect frames and offers additional gripping power
• Flexible top plate accommodates several different frame sizes
• Turning knobs with top plate secure bikes to the rack
• Bikes can be locked to the rack with 2 padlocks or with locking knobs (sold separately)

Specs:

• Holes for optional padlocks are 5/8" in diameter
• Attaches to a flat surface with a 3/4" diameter hole, making it great for step bumpers or trailer hitch ballmounts
  • If you have a 2" trailer hitch receiver, a bushing and hitch ball with a 3/4" shank are required

Each cradle contains grooved, kraton vinyl cushioning to offer additional gripping power and prevent bikes from sliding during transit.

64095 Swagman Original 2-Bike Rack

Replaces Tow Ready # 63132

Product Code: 63120 Product Price: $89.95 Product Weight: 28.00 pounds

Features:

• Carries up to 2 Bikes
  • Works with many alternative and larger tubed frame bikes
  • Women's framed bikes may require an adapter (see related items below)
• Heavy duty velcro straps secure bike to carrier
• Powder coated to resist corrosion
• Rubberized pads protect the finish on the bikes
• Bike rack tilts forward to allow access to the rear of the vehicle
• Shank rises for better ground clearance

Specs:

• Fits 1-1/4" x 1-1/4" trailer hitches
• Maximum weight on rack can NOT exceed 66 lbs.
• Measures 11-1/2" from the center of the hitch pin hole to the upright bar
• Shank has 2" rise

Product Code: 59403 Product Price: $179.95 Product Weight: 30.00 pounds

TripleX Folding 3 Bike Carrier for 1-1/4" (Class II) and 2" trailer hitch receivers

Features:

• Carries 3 Bikes
• Rack tilts down to access back of vehicle
• Arms also fold down when not in use
• Cradles include an anti-sway device to prevent bikes from rocking during transit
• Cradles accept bikes with frames up to 2-1/2" in diameter

Specs:

• Designed for Class II 1-1/4" x 1-1/4" and Class III and up 2" x 2" trailer hitches.
• Measurements:
  • 6" from the center of the hitch pin hole to the back of the upright bar when using in an 1-1/4" x 1-1/4" trailer hitch
  • 5-5/8" from the center of the hitch pin hole to the back of the upright bar when using in an 2" x 2" trailer hitch
• Limited 5-year warranty

The TripleX Bike Rack secures the bike in 3 places. The cradle that grabs the bike's upright bar (under the seat) also prevents the bike rack from swaying back and forth while in transit.

The bike rack's arms fold down when not in use. This is great for parking in garages without bikes or keeping others from running into it while you're out on the trail.

The bike rack comes ready to slide into a 2" x 2" trailer hitch receiver, but the shank can easily be rotated to slide into a 1-1/4" x 1-1/4" trailer hitch. The base also allows the bike rack to tilt forward, making it easier to get into the back of SUVs and mini-vans. The tilting mechanism is also lockable.

Product Code: TH957 Product Price: $161.00 Product Weight: 34.00 pounds

Thule Parkway 4 Bike Folding Carrier for 1-1/4" Trailer Hitch Receivers

Perfect for a weekly trip to the park or the annual family vacation, the Thule Parkway is an excellent addition to your vehicle for more convenient travel with your bikes. The careful and solid design of this 4-bike rack ensures the safe and easy transport of your bikes to your favorite destination. The convenient tilting mechanism allows for easy access to the rear cargo area of your vehicle, while an anti-rattle device secures the bike carrier to the hitch.

Features:

• Upright bar of bike carrier tilts away from vehicle for easier access to rear cargo area.
• Cushioned cradles are designed to protect bike frame while holding the bike firmly to the bike carrier.
• Dual arm design offers best bike fit, minimizing the need for top-tube adapters.
• Soft rubber straps secure bikes to cradles.
• Built-in anti-rattle device reduces the vibration and noise of the rack in the hitch.
• Optional Snug Tite lock (# THSTL2) is available to fit over anti-rattle device and secure the carrier to the hitch.
• Includes strap to reduce movement of handle bars and wheels on bike rack.
• Can be upgraded with optional Zip Stick accessory (#950) to provide more stability.
• Attaches to bottom of upright bar on bike carrier.
• Includes a strap for each bike that laces through Zip Stick which further secures bike to carrier and prevents back and forth movement.

Specs:

• For use with 1-1/4" x 1-1/4" trailer hitches.
• Can carry only 2 bikes when using with a Class I trailer hitch.
• Measures 14-3/8" from center of hitch pin hole to upright bar of bike carrier. See detail below.

Product Code: A30703FB Product Price: $214.95 Product Weight: 38.00 pounds

SportRack Tilting Trailer Hitch Mounted 3 Bike Carrier

Features:

• Carries up to 3 bikes
• Large padded cradles individually rotate
  • Accepts bikes with frames up to 2-1/4" in diameter
  • Cradles have height adjustment slots to carry bikes with larger diameter frames
  • Works with most alternative and larger tube frame bikes
• Powder coated to resist corrosion
• Bike rack tilts down allowing access to the rear of the vehicle
• Top support arm also collapses for travel without bikes or for storage
• Bike rack includes a locking knob to secure the bikes to the rack

Specs:

• Fits 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitches
• Shank measures 6-1/2" or 4-1/2" from the center of the hitch pin hole to the upright bar of the rack
• Weight capacity: 132 lbs.
  • Maximum single bike weight is 45 lbs.
• Accepts bikes with frames up to 2-1/4" in diameter
• Cradle measures 6" wide
• Normal hitch locks are not compatible with this bike rack due to the built-in anti-rattle device.
  • Use A30901LHP hitch lock to secure the rack to the hitch.

Putting the locking cradle on the end will secure all the bikes behind it.

This bike rack can be folded back when not carrying bikes.

The shank converts to fit 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.

The shank can also be folded back onto the bike rack for easy storage.

Valley # 91330

Product Code: TH917 Product Price: $341.00 Product Weight: 54.00 pounds

Thule T2 Quick-Load 2 Bike Carrier for 1-1/4" Class I and II Trailer Hitch Receivers

Whether you are an avid biker or just out for an occasional ride, this bike carrier is sure to get your bikes to your favorite destination quickly and safely. A front wheel mounting system eliminates all frame contact making this bike rack ideal for today's monocoque and aggressive frame designs. The solid design provides for simple loading and easy access to the rear cargo area of the vehicle.

Features:

• Accomodates most bikes regardless of frame design, suspension, or wheel size.
• Bike rack folds up next to vehicle when not in use.
• Support arms of mounting system fold down for easier storage.
• Built-in anti-wobble device stabilizes bike rack in hitch receiver.
• Thule Snug Tite Lock (# THSTL2) compatible
• Bike carrier tilts down for more convenient access to rear cargo area of vehicle.
• Mounting system designed for quick and easy loading of bikes into carrier.
• No wheel removal necessary.
• Cushioned bar on front mounting mechanism secures bike at fork and adjusts to wheel height.
• Rear wheel mount slides to adjust to bike length.
• Rubber straps secure bike wheels at front and back of bike carrier.
• Durable steel construction perfect for travel over rough terrain.
• Carries 2 bikes.
• Optional One Key System Locks are available to secure the bikes to the bike carrier.
  • Requires 2 lock cylinders.
  • Lock cylinders are added to the ratcheting arms to prevent release without a key.

Specs:

• Fits 1-1/4" x 1-1/4" trailer hitch receivers
• Maximum weight capacity: 100 lbs.
• Carries bikes that weigh up to 60 lbs.
• Holds bikes with a wheel size from 20" to 29" and a tire width of up to 3".
• Wheel base of bike cannot exceed 48"
• Measures 18" from the center of the hitch pin hole to the closest bike carrier rail
• Measures 5" from the center of the hitch pin hole to the bike carrier rails when folded up.
• Extends out 36" from the center of the hitch pin hole to the end of the bike carrier

Replaces 260121 Sportsworks 2 Bike

Product Code: TH954 Product Price: $314.00 Product Weight: 45.00 pounds

Thule Ridgeline 4 Bike Folding Carrier for 1-1/4" and 2" Trailer Hitch Receivers

Features:

• Hitch mounted rack carries up to 4 bikes.
• Includes Thule Stinger Swinger which allows you to easily change the the 1-1/4" shank to a 2" shank and vice versa for use on either size trailer hitch.
• Thule Hitch Switch dual quick-release levers make it easy to tilt the rack forward for rear access of the vehicle. Also makes folding the arms down for storage a breeze.
• Dual bike carrier arm design offers best bike fit, minimizing the need for a top-tube adapter.
  • Specially designed T3 cradles lock down bikes while still allowing complete adjustment along the bike rack arms.
  • Soft rubber straps secure bikes to cradles on either side of cradle.
• Includes No Sway Cage (# TH955) accessory for each bike.
  • Designed to work exclusively with T3 cradles.
  • Controls back and forth movement of bikes.
• Built-in anti-rattle device reduces the vibration and noise of the bike rack in the hitch.
  • Includes Snug Tite Lock (# THSTL2) which attaches to the anti-rattle device and secures the rack to the hitch.
• Integrated cable lock secures bikes to carrier.
  • Cables remain hidden inside arms of bike carrier when not in use.
  • One Key locking system in place for cable and Snug Tite hitch locks.
• Bike arms fold down when not in use.
• Bike rack easily tilts away from vehicle with quick release lever to allow convenient access to rear cargo area.
• Carrier includes a strap to reduce movement of handle bars and wheels on bikes when in transport.

Specs:

• Carries up to 4 bikes.
• Weight Capacity: 140 lbs.
• For use with 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers.
  • Can carry only two bikes with a class I trailer hitch.
• Measures 10-1/2" from center of pin hole to upright bar of bike carrier.
• Replaces Thule Expressway Hitch Mounted Bike Racks (# TH996XT and TH995XT).

Thule Hitch Switch
This lever is used at two places on the Thule Ridgeline bike carrier. One lever is at the base of the rack, where the shank (part that slides into the trailer hitch) is connected to the upright bar. By simply lifting up on the lever (the hitch switch), it allows the upright bar to tilt forward. To raise the rack back into position just push the rack towards the vehicle until you hear the hitch switch click into place. The hitch switch is also located at the top of the rack where the two arms that carry the bikes meet the upright bar. Again, simply lift the lever to fold the arms down for storage. This is much easier than messing around with pins, clips and cables.

Thule Stinger Swinger
The piece of the rack that slides into the trailer hitch on the vehicle is often referred to as the base, shank or stinger. The stinger on this Thule bike rack can easily be switched from the 1-1/4" x 1-1/4" size to the 2" x 2" size by sliding a one piece, 2" sleeve over the 1-1/4" stinger. It is held in place with one screw.

Product Code: TH914 Product Price: $208.00 Product Weight: 45.00 pounds

Thule Roadway 4 Bike Carrier for 1-1/4" and 2" Trailer Hitch Receivers

Features:

• Hitch mounted rack carries up to 4 bikes.
• Includes Thule Stinger Swinger which allows you to easily change the the 1-1/4" shank to a 2" shank and vice versa for use on either size trailer hitch.
• Thule Hitch Switch daul quick-release levers make it easy to tilt the rack forward for rear access of the vehicle. Also makes folding the arms down for storage a breeze.
• Dual bike carrier arm design offers best bike fit, minimizing the need for top-tube adapters.
• Specially designed T3 cradles lock down bikes while still allowing complete adjustment along the bike rack arms.
• Soft rubber straps secure bikes to cradles on either side of bike carrier cradle.
• Built-in anti-rattle device reduces the vibration and noise of the rack in the hitch.
• Optional Snug Tite lock (# THSTL2) is available to fit over anti-rattle device and secure the carrier to the hitch.
• Carrier includes an anti-sway strap to reduce movement of handle bars and wheels on bikes when in transport.
• Can be upgraded with No Sway Cage accessory (# TH955) which works exclusively with T3 cradles and prevents bikes from rocking back and forth on carrier.

Specs:

• Carries up to 4 bikes.
• Weight Capacity: 140 lbs.
• For use with 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.
  • Can carry only two bikes with a class I trailer hitch
• Measures 10-1/2" from center of pin hole to upright bar of bike carrier.
• Replaces Thule Hitching Post Pro Hitch Mounted Bike Racks (# TH935XT and TH934XT).

Thule Hitch Switch

This lever is used at two places on the Thule Roadway bike carrier. One lever is at the base of the rack, where the shank (part that slides into the trailer hitch) is connected to the upright bar. By simply lifting up on the lever (the hitch switch), it allows the upright bar to tilt forward. To raise the rack back into position just push the rack towards the vehicle until you hear the hitch switch click into place. The hitch switch is also located at the top of the rack where the two arms that carry the bikes meet the upright bar. Again, simply lift the lever to fold the arms down for storage. This is much easier than messing around with pins, clips and cables.

Thule Stinger Swinger
The piece of the rack that slides into the trailer hitch on the vehicle is often referred to as the base, shank or stinger. The stinger on this Thule bike rack can easily be switched from the 1-1/4" x 1-1/4" size to the 2" x 2" size by sliding a one piece, 2" sleeve over the 1-1/4" stinger. It is held in place with one screw.

Product Code: TH912 Product Price: $179.00 Product Weight: 39.00 pounds

Thule Roadway 2 Bike Carrier for 1-1/4" and 2" Trailer Hitch Receivers

Features:

• Hitch mounted rack carries up to 2 bikes.
• Includes Thule Stinger Swinger which allows you to easily change the the 1-1/4" shank to a 2" shank and vice versa for use on either size trailer hitch.
• Thule Hitch Switch dual quick-release levers make it easy to tilt the rack forward for rear access of the vehicle. Also makes folding the arms down for storage a breeze.
• Dual bike carrier arm design offers best bike fit, minimizing the need for top-tube adapters.
• Specially designed T3 cradles lock down bikes while still allowing complete adjustment along the bike rack arms.
• Soft rubber straps secure bikes to cradles on either side of bike carrier cradle.
• Built-in anti-rattle device reduces the vibration and noise of the rack in the hitch.
• Optional Snug Tite lock (# THSTL2) is available to fit over anti-rattle device and secure the carrier to the hitch.
• Carrier includes an anti-sway strap to reduce movement of handle bars and wheels on bikes when in transport.
• Can be upgraded with No Sway Cage accessory (# TH955) which works exclusively with T3 cradles and prevents bikes from rocking back and forth on carrier.

Specs:

• Carries up to 2 bikes.
• Weight Capacity: 70 lbs.
• For use with 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.
• Measures 10-1/2" from center of pin hole to upright bar of bike carrier.
• Replaces Thule Hitching Post Pro Hitch Mounted Bike Racks (# TH937XT and TH936XT).

Thule Hitch Switch

This lever is used at two places on the Thule Roadway bike carrier. One lever is at the base of the rack, where the shank (part that slides into the trailer hitch) is connected to the upright bar. By simply lifting up on the lever (the hitch switch), it allows the upright bar to tilt forward. To raise the rack back into position just push the rack towards the vehicle until you hear the hitch switch click into place. The hitch switch is also located at the top of the rack where the two arms that carry the bikes meet the upright bar. Again, simply lift the lever to fold the arms down for storage. This is much easier than messing around with pins, clips and cables.

Thule Stinger Swinger

The piece of the rack that slides into the trailer hitch on the vehicle is often referred to as the base, shank or stinger. The stinger on this Thule bike rack can easily be switched from the 1-1/4" x 1-1/4" size to the 2" x 2" size by sliding a one piece, 2" sleeve over the 1-1/4" stinger. It is held in place with one screw.

Replaces Thule Hitching Post Pro Bike Racks TH936XT and TH937XT

Product Code: A30403 Product Price: $121.95 Product Weight: 30.00 pounds

SportRack Tilting Trailer Hitch Mounted 3 Bike Carrier

Features:

• Carries up to 3 Bikes
• Works with many alternative and larger tubed frame bikes
• Dual arm design offers great bike support and three attachment points
• Anti sway cradle attaches to the upright or angled bar of bike frame to help keep bikes from swaying front to back.
• Soft cradles slide front to back and rotate to help accommodate many types of bikes
• Powder coated to resist corrosion
• Bike rack tilts down allowing access to the rear of the vehicle
• Top support arm also collapses for travel without bikes or for storage
• Bike rack includes a anti-rattle threaded hitch pin that prevents bike rack sway
• Optional Cable Lock (A32022) is available to lock bikes to rack
• Cable lock also stores inside the left arm of the bike rack when not in use

Specs:

• Designed for 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitches
• Hitch must have class II rating - 3,500 lbs. GTW
• Measures 12-1/4" from the center of the hitch pin hole to the upright bar of the rack
• Weight capacity: 132 lbs.
• Maximum single bike weight is 45 lbs.
• Accepts bikes with frames up to 1-1/2" in diameter
• Normal hitch locks are not compatible with this bike rack due to the built-in anti-rattle device.
• Use A30901LHP hitch lock secure the rack to the hitch or A32022 hitch and cable lock as a keyed-alike option to secure the rack and bikes to the hitch.

The shank converts to fit 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.

Product Code: A30404 Product Price: $152.95 Product Weight: 35.00 pounds

SportRack Tilting Trailer Hitch Mounted 4 Bike Carrier

Features:

• Carries up to 4 Bikes
• Works with many alternative and larger tubed frame bikes
• Dual arm design offers great bike support and three attachment points
• Anti sway cradle attaches to the upright or angled bar of bike frame to help keep bikes from swaying front to back.
• Soft cradles slide front to back and rotate to help accommodate many types of bikes
• Powder coated to resist corrosion
• Bike rack tilts down allowing access to the rear of the vehicle
• Top support arm also collapses for travel without bikes or for storage
• Bike rack includes a anti-rattle threaded hitch pin that prevents bike rack sway
• Optional Cable and Hitch Lock (A32022) are available to lock bikes to rack
• Cable lock also stores inside the left arm of the bike rack when not in use

Specs:

• Designed for 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitches
• Measures 12-1/4" from the center of the hitch pin hole to the upright bar of the rack
• Weight capacity: 180 lbs.
• Maximum single bike weight is 45 lbs.
• Accepts bikes with frames up to 1-1/2" in diameter
• Normal hitch locks are not compatible with this bike rack due to the built-in anti-rattle device.
• Use A30901LHP hitch lock secure the rack to the hitch or A32022 hitch and cable lock as a keyed-alike option to secure the rack and bikes to the hitch.

The shank converts to fit 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.

Product Code: TH990 Product Price: $269.00 Product Weight: 30.00 pounds

Thule DoubleTrack Folding 2 Bike Rack for 2" and 1-1/4" Trailer Hitches

Thule DoubleTrack Folding 2 Bike Hitch Rack is a rugged, versatile bike carrier that can transport two bicycles regardless of frame design, suspension or wheel size. Whether you are an avid cyclist or just out for an occasional ride, this bike carrier is sure to get your bicycle to your favorite destination easily and safely. The Thule Stinger Swinger allows the rack to be used in 2" and 1-1/4" hitches. Bikes are secured with attachment points at the wheels and the frame, ensuring your bikes aren't going anywhere and can't sway.

After a long day of blazing trails, the last thing you want to have to do is struggle to get your bikes into the carrier. The Thule DoubleTrack Folding 2 Bike Hitch Rack gives you the easiest loading height possible-you only need to lift the bike a few inches to sit in the wheel mount cradles. Simply place the bike wheels into the wheel cradles, lower the Ratcheting Quick Load hook down on the bike frame to secure the bike, then pull the wheel straps through the wheel. Thick padding around the hooks protect the bike and its finish. Independent adjustable wheel hoops allow you to offset each bike on the rack ensuring the two bikes don't make contact with the other.

Features:

• Accommodates most bikes regardless of frame design, suspension, or wheel size
  • Works great on children's bikes too
• Bike rack folds up next to vehicle when not in use
  • Support arm of mounting system folds down for easier storage
• Built-in stablizer device secures bike rack in hitch receiver
  • Thule Snug Tite Lock (# THSTL2) is available to lock the rack to the hitch
• Mounting system designed for quick and easy loading of bikes into carrier
  • No wheel removal or adapters necessary
  • Cushioned hook secures bike frame
  • Adjustable rear wheel mount slides to conform to bike length
  • Rubber straps secure bike wheels at front and back of bike carrier
• Durable steel construction perfect for travel over rough terrain
• Ratcheting Quick Load hooks for quick bike loading/unloading
• Independent adjustable wheel hoops eliminate bike to bike contact
• Stinger Swinger hitch adapter accommodates 2" and 1-1/4" receiver hitches
• Carries 2 bikes
• Optional One Key System Locks are available to secure the bikes to the bike carrier
  • Requires 2 lock cylinders
  • Lock cylinders are added to the ratcheting arms to prevent release without a key.

Specs:

• Fits 2" x 2" and 1-1/4" x 1-1/4" Class I and II trailer hitch receivers
• Carries up to 2 bikes (70 lbs. total)
• Wheel base of bikes cannot exceed 48"

One of Thule's locking cylinders can be inserted into the black circular hole on the gray button which is used to release the ratchet and move the hook up. Both hooks can accept a locking cylinder. Order the 4-pack of cylinders (TH544) if you want to use the same keys for the hook locks and the hitch lock (THSTL2).

990 - Thule DoubleTrack Folding 2 Bike Rack for 2" and 1-1/4" Trailer Hitches

 

2 Bike Carrier for 1-1/4" and 2" Trailer Hitches - Wheel Mount - Swagman XTC-2

Product Code: S64670 Product Price: $179.95 Product Weight: 36.00 pounds

More Information and Pricing

XTC2 Extreme Cruiser 2-Bike Cross Country Rack for 2" and 1-1/4" Trailer Hitch Receivers

This cross country model offers convenience and reliability for your traveling needs. With a two-bike capacity, it accommodates most frame sizes using wheel hoops and bike hooks. Constructed with soft-frame coating to protect the bike's finish, the bike hooks securely hold the bike in the wheel hoop cradles. The hooks smoothly slide up and down by using an easily-adjustable push button ratcheting system. The hassle of removing wheels is eliminated with wheel hoops that accommodate wheels up to 2-1/2" wide and adjust to fit different frame lengths. To decrease in size, the upright bar with bike hooks folds down when not in use. A powder-coated finish protects it from corrosion from the elements. This rack fits 2" x 2" and 1-1/4" x 1-1/4" trailer hitches.

Features:

• Carries up to 2 bikes
• Secures bikes at 3 different points
• Wheel mount design works with most bike regardless of frame size
  • Works great with children's bikes
  • Will not work with recumbent bikes or those with an extra long wheel base
• Bike hooks securely grasp frame to keep bike in place
  • Constructed with soft coating to protect frame
  • Slide smoothly up and down by using easily-adjustable push button ratcheting system
  • Offset to accommodate bikes of the same size
• Lockable with a padlock through a 1/4" hole
  • Lock #7690 works great and can be keyed alike
• Wheel hoops provide a stable platform to carry the bikes
  • Eliminate the hassle of removing wheels
  • Accommodate wheels up to 2-1/2" wide
  • Hoops are adjustable in and out to fit the length of the bikes
• Upright arm with bike hooks folds down for easy storage
• Powder-coated finish for corrosion resistance

Specs:

• Fits 1-1/4" x 1-1/4" (Class I and II) and 2" x 2" trailer hitches
• Distance from the center of the hitch pin hole to the closest edge of the first wheel hoop measures 9" long
• Maximum bike wheel base is 66" long (center of wheel loop to center of wheel loop)
• Includes pin and clip with anti-rattle to secure the rack into the trailer hitch
  • Can be locked with Swagman's anti-rattle lock #64029

A built-in adapter allows this bike rack to fit inside a 2" and 1-1/4" hitch receiver. The threaded hitch pin uses anti-rattle technology to secure the rack inside the hitch.

The wheel hoops accommodate wheels up to 2-1/2" wide, and turning knobs are used to adjust the distance between hoops to fit bikes of varying lengths. Velcro straps secure the wheels to the wheel hoops.

Bike hooks slide easily down the ratcheting system and click securely in place. The push buttons allow the hooks to slide up the ratcheting system to allow for bike removal.

64670 Swagman XTC2 Cross Country 2-Bike Rack

 

Highland SportWing 2 Bike Rack for 1-1/4" and 2" Hitches - Aluminum

Product Code: 5801200 Product Price: $124.95 Product Weight: 18.00 pounds

More Information and Pricing

Highland SportWing 2 Bike Carrier for Trailer Hitches - Aluminum

Highland has designed a truly unique, wheel mount style bike rack for use in a trailer hitch. The versatility of this bike carrier, which can handle two bikes of almost any size or frame style at the same time, makes it a great choice for your needs. The carrier easily assembles in minutes, and the support arms can be quickly removed for compact storage. In addition, all the components are made of weather-resistant materials to withstand even the harshest elements encountered on the road.

Features:

• 4 moveable nesting cradles hold bikes of any size
  • Clamp-style brackets slide along carrier arms and tighten/loosen with turn knobs
  • Bent steel tube with protective foam covering cradles wheel rim
  • Thick rubber strap pulls over tire and secures the wheel in place
  • Straps secure pedals during transport and keep bikes from rocking
• Fits both 1-1/4" or 2" trailer hitch sizes
• Long extension tube ensures bicycles are kept away from the back of vehicle
  • Black, powder coated steel extension tube and frame are corrosion resistant
• Sturdy, lightweight aluminum carrier arms are rustproof
  • Carrier arms slide on base to adjust height
  • Bike rack arms have foam sleeves to protect rack and bicycle
• Movement and noise virtually eliminated by securing bicycles by the wheels and using pedal straps

Specs:

• Fits 1-1/4" x 1-1/4" and 2" x 2" trailer hitches
• Carrier weight: 17.6 lbs
• Weight Capacity: 100 lbs
• Quick and easy assembly (4 bolts and 2 locking snap-pins)
• 1-Year manufacturer's warranty

5801200 Highland Two Bike Carrier for 1-1/4" and 2" Trailer Hitch Receiver - Aluminum

 

We have also put together some detailed bike rack information that gives an overview and explains the different types of bike racks and accessories that are available. Bike rack videos, reviews, and information articles