2007 Can-Am Outlander 650 ATV Winch Mount

It is plastic. The ComeUp UW-5000si Trailer Winch item #CU645010 is a light duty winch so it's housing and base are made of plastic. I attached a picture below that will show you the base. I've also linked an installation…

The correct custom fit winch mount for a 2014 Polaris 570 Sportsman is the Bulldog Winch Custom-Fit Steel ATV Winch Mount part #BDW15151 which contains the industry standard winch mounting pattern so it will work just fine with the Badlands 3,500…

I went to the warehouse and measured the Bulldog Winch Custom-Fit Steel Winch Mount, part #BDW15151. The mount measures 8-inches tall, 6-1/4 inches wide, and 5 inches deep. The mounting holes on the bottom bracket are 2-3/4 inches center to center.…

The Bulldog Winch winch mount, part #BDW15147, is a fit for your 1999 Arctic Cat 500. I can't confirm for sure that it fits the Traveler winch but it most likely will.

For your 2006 Yamaha Wolverine 450 we have the custom mount #BDW15140 which mounts directly to your vehicle frame. This mount is also compatible with the Superwinch LT3000, #SW1130220, that you have referenced and the combination will work very…

We carry a number of stake pockets and you can choose the correct one for your application in terms of size and weld or bolt on. The bolt-on option is the CE Smith Stake Pocket #CE45004G which is 3-1/2" long x 1-1/2" wide…

There is not a Group 26 battery box for some reason. The smallest battery box available that will fit your 9" L x 6-1/2" W x 8-1/2" H battery is the Tow-Rax Battery Box #TWSP12B. This measures 12" long x…

We have the perfect winch for you to pull your 3,000 lb car onto your trailer, the ComeUp UW-5000si Trailer Winch #CU645010. This 5,000 lb static load/50,000 lb rolling load winch has a wireless remote (which is also waterproof) that will let you…

I recommend going with the Bulldog Winch Snowplow Winch #BDW15021 for your 2002 Polaris 400 Sportsman. This winch is specifically designed for snow plow applications and will do a great job with your setup. The mounting kit that you will want to go…

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

I've contacted Brightway, who forwarded me a copy of the instructions they include with the #BRW77FR switch mode charger. I've provided a clip showing the instructions for you.

Yes, the Bulldog Winch Custom-Fit Steel ATV Winch Mount, part #BDW15115, will work with your 2004 Bombardier Outlander 330. I have included the mounting plate measurements below so you can check to see if it matches your Chicago 3000 lbs winch,