Toyota Tacoma Truck Tool Boxes

change vehicle

Select Toyota Tacoma Year

Available Years for Toyota Tacoma Truck Tool Boxes

Tool Box Manufacturers

• 

  DeeZee
  

  Rackem
  

  RC Manufacturing
  

  TruXedo
  

  Redline

Tool Boxes

Truck Tool Box

Trailer Tool Box

Chest Tool Box

Liquid Transfer Tank

Side Rail Tool Box

Wheel Well Tool Box

ATV Tool Box

You may also be interested in...

Suspension Enhancement

Truck Bed Accessories

Locks

Ladder Racks

Brake Controller

Accessory Step

Truck Accessories

Toyota Tacoma Toolbox Questions and Answers

• DeeZee Tool Box Recommendation for a 2012 Toyota Tacoma Crew Cab
  
• I checked with DeeZee and they recommend the DeeZee Hardware Series Truck Bed Toolbox # DZ8160NB as a fit for your 2012 Toyota Tacoma. The dimensions of this box are 60 inches long by 20 inches wide and 12-1/5 of an inch tall. I would still recommend you check the measurements of your bed to be sure this box will fit.
  view full answer...


• DeeZee Toolbox for a 2009 Toyota Tacoma with Bed Rail System and 6 Foot Bed
  
• I spoke with my contact at DeeZee and toolbox # DZ8160 fits all models of the 2009 Toyota Tacoma with the 6 foot bed. It should not interfere with the the bed rail system but also it will not utilize it for installation. The overall width left to right at the top is 60 inches. At the bottom below the rails it is 51 inches left to right.
  view full answer...


• Will UWS Crossover Toolbox # UWS00404 Fit a 2013 Toyota Tacoma Double Cab Short Composite Bed
  
• To determine if UWS toolbox # UWS00404 will fit your 2013 Toyota Tacoma you will need to compare the box measurements with the available space in the truck bed. The box dimensions are on the product page below the description and I have included a picture as well. The crossover toolbox comes with J-hook bolts that will secure it to the side rails of the truck bed. If your truck has the bed rail system it may interfere with the J-hook method of installation. In that case you may need to use th
  view full answer...


• Will UWS Toolbox, # UWS00404, Fit a 2012 Toyota Tacoma Double Cab
  
• The UWS toolbox, # UWS00404, is listed as a fit for the 2012 Toyota Tacoma Double Cab. We always recommend taking a look at the box dimensions, see picture I have included, to ensure proper fit. Because of the size of this item, it ships via a freight service. Use the pull down menu under the shipping special box on the product page to determine the freight cost. You can also call customer service at 800-298-8924 for additional and more specific information.
  view full answer...


• UWS Crossover Toolbox Fit for a 2005 Toyota Tacoma Regular Cab
  
• The UWS Deep Truck Bed Toolbox, # UWS04545, is confirmed to fit your 2005 Toyota Tacoma regular cab. This toolbox will sit on the top of your truck bed walls and secures using j-hooks that grab the underside of the top of the truck bed wall. I have attached an image of the dimensions of this toolbox so you can compare them to the space available in your truck bed to be absolutely certain that you will not have any fit issues. If you have a bed liner that covers the underside of the top of th
  view full answer...


• Will UWS Crossover Toolbox # UWS00419 Fit a 1996 Toyota Tacoma Regular Cab
  
• The UWS toolbox # UWS00419 is listed as a fit for the 1996 Toyota Tacoma Regular Cab. I have included a link to a video review of this box for you. I have also included a video showing a typical installation of a crossover style toolbox that should help.
  view full answer...


• Will the UWS Deep, Angled Truck Bed Toolbox # UWS04548 fit a 2013 Toyota Tacoma Double Cab
  
• The 2013 model Toyota Tacomas were unchanged from the 2012 models so the UWS Deep, Angled Truck Bed Toolbox # UWS04548 will work for you.
  view full answer...


• Fit of UWS Crossover Truck Toolbox # UWS00420 on 2012 Toyota Tacoma Access Cab
  
• According to UWS, the # UWS00420 Crossover Truck Toolbox you referenced is a fit for the 2012 Toyota Tacoma Access Cab. The box is designed to fit truck beds that are at least 55 inches wide. Just to be certain, I would recommend comparing the dimensions of the box (see diagram) to the available space in your truck bed.
  view full answer...


• Will Bed Liner have to Be Trimmed to Install a Crossover Toolbox on a 2012 Toyota Tacoma Double Cab
  
• The UWS toolbox # UWS04546, is listed as a fit for the 2012 Toyota Tacoma Double Cab. Crossover toolboxes attach to the truck bed side rails with j-bolts like in the video I have linked. You will need to trim the bed liner where the j-bolt needs to attach to the truck.
  view full answer...


• Will UWS Black Crossover Toolbox # UWS04546 Fit a 2012 Toyota Tacoma TRD Access Cab with Bedliner
  
• UWS toolbox # UWS04546 is listed as a fit for your 2012 Toyota Tacoma Access Cab. The box measures 63 inches wide, 17 inches deep at the bottom, and 40 inches wide at the bottom. The box is 20-1/2 inches tall overall. Compare these measurements to your truck bed to ensure fit. This toolbox mounts to the truck using j-bolts like in the video I have linked. If the bedliner is a drop in type then you will need to drill through it or cut away an area for the j-bolt. If it is a spray-in liner then
  view full answer...


• What are the Measurements for UWS Crossover Toolbox # UWS00331 and Will it Fit a 2006 Toyota Tacoma
  
• The UWS toolbox, # UWS00331, is actually 60 inches long at the top and 52 inches long at the bottom. I have included a picture that shows the measurements of the box. This box is not listed as a fit for the 2006 Toyota Tacoma but you can also go by the measurements to determine fit. I have included a link to all of the toolbox options for a 2006 Toyota Tacoma. When you open the link just select the cab size you have to see the available options.
  view full answer...


• Will UWS Crossover Low Profile Toolbox # UWS00419 fit 2004 Tacoma Extended Cab with Standard Bed
  
• I have spoken with my contact at UWS, who confirms that the Angled Truck Bed Toolbox you mentioned, part # UWS00419 is indeed a fit for your 2004 Tacoma Xtra Cab with standard (not stepside) bed. The box features the angled sides to clear the wheel wells. I would also recommend taking some measurements of your truck bed and comparing them to the provided diagram to confirm fit.
  view full answer...


• Will the UWS Toolbox # UWS00380 Fit a 2001 Toyota Tacoma Short Bed
  
• On the UWS toolbox # UWS00419, the measurement from underneath, where it will sit on the rails, down to the bottom of the box is 11-3/4 inches. I have included a picture that shows all of the box measurements for you.
  view full answer...


• Dimensions for UWS Truck Bed Tool Box Part # UWS00380
  
• I called our contact at UWS and confirmed that the dimensions we have listed for the UWS00419 are indeed correct. There is not much of a difference between the UWS00350 and UWS00419 boxes. If you look at the diagram I produced, you can see the difference in depth between the two boxes. The differences are highlighted in red.
  view full answer...


• Crossover Style Toolbox Options for a 2009 Toyota Tacoma Double Cab
  
• The UWS Toolbox, part # UWS04546, will work on your 2009 Toyota Tacoma double cab with factory bed liner. The only interference you may have with the bed liner is installing the j-bolts that hook to the under side of the bed rails. The crossover style tool boxes for your truck all use the j-bolts to secure to your truck. You may need to cut out part of the bed liner if there is not enough room for the j-bolts to secure under the bed rail. I have included a video demonstration of a crossover s
  view full answer...


• Truck Bed Tool Box Recommendation for a Base Model 2012 Toyota Tacoma Truck
  
• Yes, I checked with DeeZee to be sure and they do recommend the # DZ8160N single lid truck bed toolbox for your 2012 Toyota Tacoma, if it is not a stepside model. If you have a stepside model 2012 Tacoma the only option available is a chest style box, like the DeeZee Utility Chest, # DZ8537.
  view full answer...


• How to Mount a Crossover Toolbox in a 2011 Toyota Tacoma
  
• A toolbox like # UWS00404, is meant to install on a truck using j-bolts. The bolts go through the toolbox and the hook end goes up under the bed rail to hold the box in place. You will not be drilling or cutting into the truck bed. I have included a link to a video that shows a typical installation. The only other way to mount the box would be to use some type of cargo strap or tie down to hold the box down.
  view full answer...


• UWS Angled Truck Bed Toolbox Recommendation for a 2001 Toyota Tacoma Reg Cab
  
• As long as your 2001 Toyota Tacoma regular cab does not have a step side bed the UWS Angled Toolbox, # DCS62LP, would work for you as it has been confirmed to fit your vehicle. If you have a step side the # DCS62LP would not work for you. I attached a link to a page that has all of the different boxes that would work if you have a step side.
  view full answer...


• Can a Toolbox be Installed on a 2010 Toyota Tacoma with a Factory Bed Liner
  
• You may or may not have to trim the bed liner in your 2010 Toyota Tacoma to install a toolbox. If it is a spray-in type of bed liner, you will not have to trim it. If it is one that slides or drops in, those do not usually cover the rails inside or outside of the truck. But, in case it does, for the best fit the j-bolts would need to contact the bed directly. I have included a link to a video that shows a typical toolbox installation that should help you. You can see that the truck in the vid
  view full answer...


• Will DeeZee Toolbox # DZ6160NB fit in the Bed of a 1999 Toyota Tacoma with a Plastic Bedliner
  
• The DeeZee Toolbox # DZ6160NB that you referenced is a confirmed fit for your 1999 Toyota Tacoma as long as it is a regular cab. The plastic bed liner in the bed of your truck should not pose a fit problem for you, but in the worst possible scenario you might need to trim the bed liner.
  view full answer...


• Will a Dewalt Contractor Toolbox Fit a 2004 Toyota Tacoma
  
• The UWS Toolbox, # UWS04543, will only fit a Regular Cab, excluding stepside 2004 Toyota Tacoma. To be certain, you can view the measurements of the box on the product page and compare those to the area in your truck. The toolbox will install using j-bolts that are included. I have included a link to a video that shows a typical toolbox installation for you.
  view full answer...


• Will the UWS Low Profile Toolbox Fit Behind the Wheel Wells in a 2011 Toyota Tacoma Double Cab
  
• I spoke with my contact at Thule the parent company for UWS and found that the UWS toolbox, # UWS04548, will work in the bed of your 2011 Toyota Tacoma Double Cab. The sides of this box are angled 8 inches in at the bottom, see drawing, to allow the box to fit with the limited room between the wheel wells and front of the truck bed. You can use the attached drawing to measure and verify that the box will fit.
  view full answer...


• DeeZee Truck Bed Toolbox Part # DZ6160N for 2004 Toyota Tacoma Extended Cab
  
• The DeeZee Truck Bed Toolbox you mentioned, part # DZ6160N will fit all cab configurations of the 2001 Tacoma. It is also available in a black powder coat finish, as part # DZ8160NB To see the install details for the toolbox, click on the provided link.
  view full answer...


• Fit of UWS Crossover Tool Box Part UWS00333 on 2005 Toyota Tacoma Double Cab Short Bed
  
• As long as your Tacoma is not equipped with the standard and not the stepside bed, the UWS Crossover Tool Box you referenced, part # UWS00333 will fit your 2005 Tacoma Double Cab with the short bed. UWS also offers a rubber mat for the interior of their truck boxes. The mat can be trimmed to fit, and is part # TOOLBOXLINER.
  view full answer...


• Will UWS Angled Truck Bed Toolbox, # UWS00420 Fit a 2008 Toyota Tacoma Double Cab
  
• The UWS Angled Truck Bed Toolbox, # UWS00420, does fit the 2008 Toyota Tacoma Double cab with a 6 foot bed. The box mounts to the side rails of the bed using J-hook hardware. You will most likely need to drill a hole in the liner for the hardware only but you should not have to remove the liner. I have included a link to a video showing a typical installation for you.
  view full answer...


• Availability of a Truck Bed Tool Box that Will Fit a 2009 Toyota Tacoma
  
• You can use UWS Tool Box, # UWS00404, that you referenced. I attached a drawing with dimensions that you can use to verify that this box will fit before ordering.
  view full answer...


• How Does The UWS Truck Bed Toolbox - Crossover Style # UWS00404 Mount To A 2010 Toyota Tacoma
  
• The UWS Truck Bed Toolbox - Crossover Style - Single Lid Series, part # UWS00404, will fit the 2010 Toyota Tacoma Double Cab and Access Cab, and the Regular Cab. It does not require any drilling of the truck bed on your 2010 Toyota Tacoma for installation. It comes with J-bolt hardware that will hold the toolbox to the truck bed. The only thing to drill is the holes in the toolbox that the J-bolts will fit through. You will center the toolbox in your truck bed and there will be a space b
  view full answer...


• Will UWS Truck Bed Toolbox, # UWS00331 Fit a 2001 Toyota Tacoma Xtracab TRD 4-Wheel Drive V6
  
• According to what I was able to find out after doing a little research, the UWS Truck Bed Toolbox, # UWS00331, should fit your 2001 Toyota Tacoma Xtracab. To be certain, I recommend taking some measurements of your truck bed and comparing those to the dimensions of the box which I have included below. The top of the box is 60 inches across. At the bottom it is 52 inches across. The overall height is 9-1/4 inches. From the bottom of the box to the bottom of the lip (that rests on the side of t
  view full answer...


• Does The UWS Toolbox # UWS04545 Attach With J-Bolts To A 2010 Toyota Tacoma And Are They Included
  
• The UWS Deep Toolbox, part # UWS04545, will install on your 2010 Toyota Tacoma Regular Cab with J-bolts. The J-bolts, # UWSJBOLT, are included with the toolbox. I am including a link to a video review of a similar Dewalt toolbox. The video will show the J-bolts and how they attach the toolbox to the truck bed rails.
  view full answer...


• Low Profile Black Toolbox to Fit in a 2010 Toyota Tacoma Regular Cab Pickup
  
• The correct low profile black tool box for the 2010 Toyota Tacoma, is the UWS Angled Truck Bed Toolbox - Crossover Style - Low-Profile Series, item # UWS00420. The box you selected, # UWS00419 will not fit in the Tacoma. If you have a Double Cab or Access Cab Toyota Tacoma, the # UWS00420 box will work in these vehicles also.
  view full answer...


• Will UWS Truck Bed Toolbox #UWS00419 Fit 2000 Toyota Tacoma Xtra Cab w/bedliner
  
• I contacted our representative at UWS and she could not confirm a fit for the UWS Truck Bed Toolbox, part # UWS00419. She informed me that it will fit the regular cab, but not the step-side model of the Tacoma. She recommended that since you do have a bedliner, that you measure to the width of the bed with bedliner. You would need 48 Inches from the edge of bed to edge of bed for part # UWS00419 to fit. I would also measure the width from the inside front portion of the front of the bed
  view full answer...


• Will the UWS Slim Line Series Truck Bed Toolbox # UWS00333 Fit a 2011 Toyota Tacoma Access Cab
  
• I spoke with my contact at UWS and found that the UWS Slim Line Series Truck Bed Toolbox - Narrow Crossover Style, item # UWS00333, will fit in your 2011 4 door Tamoma Access Cab 4X4 short bed truck. If you would like to measure to be absolutely sure before ordering we have dimensions, about 3/4 of the way down on our product page, that you can use to check the dimensions in your truck bed.
  view full answer...


• How To Install The UWS Truck Bed Toolbox, # UWS00333, On A 2005 Tacoma PreRunner Access Cab
  
• The UWS Truck Bed Toolbox, # UWS00333, does not require any drilling of the truck bed on your 2005 Toyota Tacoma PreRunner Access Cab for installation. It comes with J-bolt hardware that will hold the toolbox to the truck bed. The only thing to drill is the holes in the toolbox that the J-bolts will fit through. You will center the toolbox in your truck bed and there will be a space between the bed rail and the side of the toolbox. You will measure the distance to that space and transfer tha
  view full answer...


• Installation Instructions for Mounting the UWS Truck Toolbox, # UWS00420 in a 2010 Toyota Tacoma
  
• The UWS Angled Truck Bed Toolbox, # UWS00420, mounts to the 2010 Toyota Tacoma using the included J-bolt hardware. I have included a video link below that shows how the J-bolts work in a typical installation. The J-bolt section starts about at the 1 minute mark but the whole video should be helpful.
  view full answer...


• Will UWS Deep, Angled Truck Bed Toolbox , # UWS04547, Fit 2008 Toyota Tacoma Short Bed
  
• The UWS Toolbox, # UWS04547, will fit the 2008 Toyota Tacoma Regular Cab, Double Cab and the Access Cab. When installing the UWS Toolbox, # UWS04547, it will require holes to be drilled into the bed rails to attach the toolbox to the bed.
  view full answer...


• Recommend Black Aluminum Toolbox and How to Install on 2010 Toyota Tacoma 4-Door
  
• We do have a toolbox that will fit your 2010 Toyota Tacoma and the item you selected, UWS Contractor Series Truck Bed Toolbox, part # UWS00404, is recommended for your truck. This box is 7.6 cubic feet and it has a bottom that is more narrow to fit for your truck. I attached a drawing with the dimensions of this box added so you can measure to be sure the box will fit in your truck bed. The toolbox installs using included J-bolt hardware. I have included a video that shows how to install t
  view full answer...


• Will the UWS Toolbox Part # UWS00404 Fit on a 2008 Toyota Tacoma
  
• If your Tacoma has a Regular Cab, Access Cab or Double Cab the UWS Truck Tool Box, part # UWS00404, will fit your truck. I added a review video on a truck box that you might find helpful for installation of the box.
  view full answer...


• What Crossover Truck Bed Tool Boxes will Fit a 2007 Toyota Tacoma
  
• We have several tool boxes from UWS that will fit a 2007 Toyota Tacoma Double Cab or Quad Cab, see link. The one you were looking at, part # UWS00404, has 7.6 Cubic Feet of space and will work nicely in the bed of your truck. I attached a drawing with dimensions that you can use to verify that the box will fit before ordering.
  view full answer...