Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Toyota. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Toyota on the road.
What our customers are saying:
Your customer service has been World Class. The trailer hitch installed in minutes.
Robert
Southbridge, MA
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
Hitch Accessories
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 2012 Toyota Camry - Hidden Hitch
Today on our 2012 Toyota Camry we'll be installing Hidden Hitch, part number 90079. This is what our hitch will look like once its installed. Next we'll go ahead and give you a couple of measurements to assist your selecting accessories for your new hitch such as a ball mount, bike rack or cargo carrier.From the center of the hitch pin hole to the outermost edge of the bumper is 2 inches. From the top of the receiver tube opening to the ground is 11-3/4 inches. Now let's go ahead with installation. To begin our install we'll first need to lower the exhaust.
Trailer Hitch Installation - 2012 Toyota Camry - Curt
Today, on our 2012 Toyota Camry Hybrid, we'll be installing the CURT hitch, part number C12082. This is what our hitch will look like once its installed. Next, we'll go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is two and a half inches. From the top of the receiver tube opening to the ground is eleven and a quarter inches.This will assist you selecting accessories such as a ball mount, a bike rack, or a cargo carrier. To begin our install, we'll first need to remove the under body trim panel and its multiple fasteners that secure it.
Trailer Hitch Installation - 2012 Toyota Camry - Draw-Tite
Today on this 2012 Toyota Camry were going to install part number 36514 from Draw Tite. This is what the hitch looks like when its installed on the car. Next well give you some measurements to help you out in selecting some accessories such as a bike rack or a cargo carrier. From the top of the receiver opening down to the ground will be 11 inches, and from the center of the hitch pin hole to the edge of the bumper will be about two inches. Now well go ahead and show you how the hitch is installed. First we have to look at the vehicle on the drivers side frame rail.
Trailer Hitch Installation - 2008 Toyota Camry - Hidden Hitch
Today on this 2008 Toyota Camry were going to install part number 90152 from Hidden Hitch. This is what the hitch looks like when its installed on a vehicle. Next well give you some measurements thatll help you with selecting some accessories such as the bike rack or a cargo carrier. From top of the receiver opening down to the ground will be about 11 inches. From the center of the hitch pin hole to the edge of the bumper will be about 4 inches. Now Ill go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2007 Toyota Camry - Hidden Hitch
Today on this 2007 Toyota Camry were going to install part number 90152 from Hidden Hitch. This is what the hitch looks like when its installed on the car. Next, well give you some measurements to help you out in selecting some accessories, such as a ball mount, bicycle rack or a cargo carrier. From top of receiver opening down to the ground will be 11 inches and from the center of the hitch pin hole to the edge of the bumper will be five inches. Now, well go ahead and show you how the hitch is installed. First thing you need to do, is get inside the trunk and remove the spare tire.
Trailer Hitch Installation - 2011 Toyota Camry - Hidden Hitch
Today on our 2011 Toyota Camry, we'll be installing Hidden Hitch, part number 90152. Now before we begin our installation, here are a few measurements to help you in selecting accessories such as a cargo carrier or a bike rack. From the center of the hitch pin hole to the outermost part of the bumper is 4-1/2 inches and from the top of the receiver tube to the ground is 10-1/4 inches. Now, we'll go ahead with our install. Now to begin our installation, we'll go ahead and remove the spare tire and all the components from the inside the trunk. We'll next need to lower the vehicle exhaust.
Trailer Hitch Installation - 2004 Toyota Camry
Today on our 2004 Toyota Camry, well be installing Draw-Tite Hitch part number 24715. Before we start our installation, here are a few measurements. This will help you when selecting accessories such as a cargo carrier or a bike rack. From the top of the receiver tube to the ground is 11 inches and from the center of the hitch pinhole to the outermost part of the bumper is 3 inches.Now well go ahead with our install. To begin our installation, well need to remove the rear exhaust hanger on the passengers side as this will be the two attachment points for our hitch. On the drivers side, well need to locate our attachment points, which are two weld nuts.
Trailer Hitch Installation - 2007 Toyota Camry
Today were working on a 2007 Toyota Camry. Were going to install Draw Tite Hitch part number 36416. This will also be comparable to Hidden Hitch part number 90152. Here are a couple of measurements that will assist you when selecting new accessories for your hitch such as a draw bar, a bike rack, or a cargo carrier. From the center of the pin hitch hole to the outer most point of the bumper is 4-3/4, from the top of the receiver tube to the ground is 11. Now lets go ahead with the installation.
Trailer Hitch Installation - 2010 Toyota Camry
Today were working on a 2010 Toyota Camry. Were going to install a Draw Tite Hitch part number 36416. This will also be comparable to Hidden Hitch part number 90152. Here are a couple of measurements that will assist you in selecting accessories for your new hitch such as a draw bar, a bike rack, or a cargo carrier. From the center of the pin hitch hole to the outer most point of the bumper is 4-3/4 inches. From the top of the receiver tube to the ground is 10-1/2 inches.
Today we are going to be working on a 2010 Toyota Camry. We are going to be installing Curt hitch part number 12343. Here are a couple of measurements for your new hitch. From the center of the hitch pin hole to the outermost point of your bumper is 2 inches. From the top of the receiver tube to the ground is 12 inches. Now let us go ahead and start our installation. 0:26
Trailer Hitch Installation - 2009 Toyota Camry
Today we are going to be installing Draw-Tite hitch part number 36416 on a 2009 Toyota Camry. This hitch installation will also apply for Hidden Hitch part number 90152. OK, the first thing we want to do is to open up the trunk. And we need to remove our spare tire, because we will be drilling some holes through the spare tire well. As you can see here on the passengers side, we are going to need to actually lower the exhaust. You want to go ahead and use a strap or something to hold the exhaust up, because once you remove the final hanger, it will considerably. We are also going to go to the forward side of the exhaust. We need to remove the exhaust off the rubber hangers here, and here as well. You can see we have a reinforcing bracket that we are going to need to remove. And with the exhaust lowered and the brackets removed, we can go ahead and point out the mounting location for the trailer hitch. We have got two weld nuts here in this bumper flange that we are going to go ahead and use as two of the attaching points on each side. Once we get the hitch mounted into these weld nuts, there are two tabs that are going to be going into the spare tire well - which, we are are going to use the hitch as a template and drill holes through there. Then next, we want to go ahead and remove the two fascia clips here at the bottom of the bumper. When we mount the hitch, it will allow the cross tube to go up and behind the bumper.
Today we are going to be installing Curt hitch part number 12343 on a 2009 Toyota Camry. We are underneath the vehicle now, and I am going to go ahead and point out the mounting location for the trailer hitch before we get started. As you can see here on the passengers side, we have got the main exhaust. There are three bolts here at the bottom of the frame holding the exhaust bracket on. We are going to to need to remove those, and the hitch is actually going to go up in that same mounting location, using those same three holes. It is also going to use the weld nut here on the vertical flange here, nearest the bumper. You can see we have a reinforcing bracket that we are going to need to remove there are three bolts to take that off. The attaching points, again, on the drivers side, we are going to be using this same vertical flange. We are going to use this existing weld nut, and this one as well. This one you can see is covered by tape, so we are going to need to remove that first. And then this tab on the outboard side of the frame as well. And again, I am just cutting out the sticker to expose the weld nut and the frame. Some of these exposed weld nuts might have a considerable amount of corrosion in them. If that is the case, you want to go ahead and spray them down with some sort of lubricant, and maybe get a wire brush in there to clean them out really well before you get started.
Trailer Hitch Installation - 2003 Toyota Camry
Today we are going to install part number 12339 from Curt, and we are going to install this on a 2003 Toyota Camry. Before we begin our install, we will show you exactly where the hitch will mount up on the vehicle. First off, on the passengers side, it will mount up on these three bolts right here. We have taken these three bolts - one, two, three - and those will be replaced with the bolts that came with the hitch. Moving over to the drivers side, there will be couple of different varieties, depending on the vehicle you have. They will always have these two holes right here. On some varieties, there will be no holes here or maybe two existing holes. Or, in this case, there is actually one hole underneath the sticker right here. You will not actually know until you look underneath the vehicle. And there is a threaded bolt hole. So, in this case, we will only be using these three holes.
Trailer Hitch Installation - 2005 Toyota Camry
Today we are going to install part number 36336 from Draw-Tite on an 2005 Toyota Camry. The first thing we will to show you is where the hitch mounts on the frame. And the hitch will mount on the frame here using these two bolt holes for sure. However, on some models there may be no more bolt holes, and there might be an extra one here. In this case, see? There is like a black sticker covering the hole. We will check it out and see if this is a threaded hole. If so, we can actually use that. If your vehicle does not have this threaded hole here, then you just drill out two holes using the hitch as a template and then put a U-bolt inside. We will see what we have got here. And it looks like this is a threaded hole. So on this side we will be using three attaching points. On the passengers side, with the exhaust here, we have to take down these two bolts, and then the hitch goes in this place. And then the exhaust bracket actually bolts on top of the hitch.
