Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Saturn. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Saturn on the road.
What our customers are saying:
I placed an order for a hitch and decided afterwards I wanted to upgrade the shipping. I called them the next morning to make the change and the most amazing thing happened. I actually was able to speak to a living, breathing human being. On top of that they were able to take care of my request without getting help from someone else. Hold the flowers customer sevice is not dead.
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 2006 Saturn Vue - Hidden Hitch
All right. Today on this 2006 Saturn Vue, we're going to install Part Number 87572. This is from Hidden Hitch. Okay. First thing we're going to do is clean up the thread of holes, they're inside of the frame. Looking at the passenger side, you can see two threaded holes.
Trailer Hitch Installation - 2009 Saturn Vue - Curt
Today on our 2009 Saturn Vue, we'll be installing Curt Hitch, part number 13594. Now before we begin our installation, here's what your hitch will look like on the vehicle. We'll go ahead and give you a few measurements to help you in selecting accessories such as a drawbar, a bike rack, or a cargo carrier. From the center of the hitch pin hole to the outermost part of the bumper is 4 inches and from the top of the receiver tube to the ground is 14-1/4 inches. Now, let's go ahead with our install. To begin our installation, we'll need to lower the exhaust by removing the three exhaust hangers.
Trailer Hitch Installation - 2007 Saturn Vue - Hidden Hitch
Today on our 2007 Saturn Vue well be installing the Hidden Hitch, part number 87572. This is what our hitch will look like once its installed. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 4 inches. From the top of the receiver tube to the ground is 14 inches. This will assist you when selecting accessories such as a draw bar, a bike rack, or a cargo carrier.
Trailer Hitch Installation - 2009 Saturn Vue - Draw-Tite
Today on this 2009 Saturn Vue, we're going to install part number 75556 from Draw-Tite. Now, this is what the hitch looks like once installed on the vehicle. Next, we'll give you some measurements that will help you out in selecting some accessories such as the ball mount or bicycle, or a cargo carrier. From the top of the receiver opening down to the ground is going to be 14 inches, and from the center of the hitch pin hole to the outside edge of the bumper is going to be 6-1/4 inches. Now, we'll go ahead and show you how the hitch is installed. The first step to install our hitch is to go ahead and lower the exhaust.
Trailer Hitch Installation - 2003 Saturn Vue - Curt
Today on our 2003 Saturn Vue were going to be installing the Curt hitch part number C12291. Here are a couple of measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 2-1/2 inches, from the top of the receiver tuber to the ground is 13-1/2 inches. This will assist you in selecting accessories such as a drawbar, a bike rack, or a cargo carrier. Now, lets go ahead with the installation. For this application theres no tie down bracket to be removed.
Trailer Hitch Installation - 2004 Saturn Vue
Today on this 2004 Saturn Vue we are going to install part number 13591 from Curt. We are looking at the passenger side of the frame. These are two threaded openings that we will use to attach the hitch on the vertical surface of the frame here. This is going to be identical on both sides of the vehicle. We will move to the bumper structure and we will show you the two openings here and here. Our next step is to inspect the threads on the frame of the vehicle itself. What we are going to do is spray it down with some lubricant. In this case we are going to use a tube cleaner about 1/ 2 inch diameter and just use that to clean out the threads with. The tube brush we are using is part number 814092. When you have it good and cleaned out, run your bolt in until you can get it started by hand and probably turn it with a wrench and it should be okay. 00:56
Trailer Hitch Installation - 2007 Saturn Vue
Today on this 2007 Saturn Vue we are going to be installing Curt hitch part number 13591. Starting at the center of the vehicle at the bottom of the bumper you can see right here in the middle we have got two square holes. Those are going to provide our two attaching points for our trailer hitch. If we move to the outside of the frame nearest the bumper you can see we have got two weld nuts on top of each other. Those are going to provide the two attaching points to the frame of the vehicle and that is going to be the same on both the driver and passenger sides. 00:27
Trailer Hitch Installation - 2003 Saturn Vue
Today on this 2003 Saturn Vue we are going to be installing Curt hitch part number 13591. We are underneath the vehicle, we are going to point out the mounting holes for our trailer hitch. Starting at the center of the vehicle, just below the bumper we have two existing holes, these are going to provide our two center most attaching points for our trailer hitch. Into those two hole we are going to be mounting the 1/ 2 inch carriage bolt along with the 1-1/2 by 2 inch block. If we move to the outboard side of the frame, we have two existing weld nuts here at the end of the frame rail, one on top of each other, these are going to provide the two attaching points on the side of the frame. That is going to be the same on both the driver and passenger side. :37
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com