view cartView Cart
Only 18 Hours 54 Minutes Remaining

Kia Soul Trailer Hitch

change vehicle

Select Kia Soul Year

Trailer Hitch

Custom fit Trailer Hitch for your:



Available Years for Kia Soul Trailer Hitch



Trailer Hitches for Kia

Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Kia. Choose the hitch that is right for your towing needs and your budget.

All hitches come with a limited lifetime warranty and are manufactured in the USA.

We offer over a custom hitch for virtually every Kia on the road.




What our customers are saying:

Just wanted to thank you. Flawless service when I called, excellent prices, and an awesome trailer hitch. Ill definitely recommend you guys!! Jason

Jason

Black Mountain, NC






Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers






Kia Soul Trailer Hitch Videos

Trailer Hitch Installation - 2012 Kia Soul - Hidden Hitch

Today on our 2012 Kia Soul we'll be installing hidden hitch, part number 60256. This is what our hitch will look like once it's installed. Next we'll go ahead and give you a few measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outer most edge of the bumper is approximately five inches. From the top of the receiver tube to the ground is 9-1/2 inches. This will assist you with selecting accessories such as a bike rack and a cargo carrier.



Trailer Hitch Installation - 2012 Kia Soul - Draw-Tite

Today on our 2012 Kia Soul, we'll be installing Draw-Tite Hitch, part number 24839. This is what our hitch will look like once it's installed. Next we'll go ahead and give you a few measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is approximately five inches. From the top of the receiver tube to the ground is nine and a half inches. This will assist you in selecting accessories such as a bike rack or a cargo carrier.



Trailer Hitch Installation - 2012 Kia Soul - Curt

Today on our 2012 Kia Soul, we'll be installing the Curt hitch part number 11110. This is what our hitch will look like once it is installed. Next we'll go ahead and give you a few measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pin hole, to the outermost edge of the bumper is approximately five inches. From the top of the receiver tube to the ground is ten and a half inches. This will assist you in selecting accessories such as a bike rack or a cargo carrier.



Trailer Hitch Installation - 2011 Kia Soul

Today on this 2011 Kia Soul, we're going to install part number 24839 from Draw-Tite. This will also apply to part number 60256 from Hidden Hitch. This is what the hitch looks once installed. Next, we'll give you some measurements that will help you out in selecting some accessories. And from the center of the hitch pinhole to the outside edge of the bumper is going to be 5-1/4 inches. From the top of the receiver opening down to the ground on this particular car, we're going to be looking at a measurement of 9-1/2 inches.



Trailer Hitch Installation - 2011 Kia Soul - Curt

Alright, today on this 2011 Kia Soul, we're going to install part number 11110 from Curt. This is what the hitch looks like once installed on the vehicle. Next, we'll give you some measurements that will help you out in selecting some accessories. From the top of the receiver opening down to the ground is going to be 10-3/8 inches. From the center of the hitch pinhole to the outside edge of the bumper is going to be 6 inches. Now, we'll go ahead and show you how the hitch is installed.



Trailer Hitch Installation - 2010 Kia Soul

Today we are going to install part number 11110 from Curt, and we are going to install this on a 2010 Kia Soul. First, to install the hitch, we are going to have to lower the exhaust. Disconnect this rubber hanger right here, and this rubber hanger here.We are going to spray it down this hanger with some lubricant. And then we can slide it off.





Kia Soul Trailer Hitch Questions and Answers


  • Visibility of Trailer Hitch Installed on 2014 Kia Soul
  • We do indeed have a photo provided from Curt showing their # C11385 installed on a second-generation Kia Soul. As you can see, the only portion of the hitch that's visible from eye level at the rear of the vehicle is the receiver opening, almost all of the crossbar is concealed by the bumper. Hidden Hitch offers the # 60347 and Draw-Tite has # 24915, both of which would also be largely concealed behind the bumper. All three hitches have the same weight rating, and would install in the
    view full answer...

  • Can 2011 Kia Soul with Draw-Tite Class I Hitch # 24839 Tow a 5 x 8-Foot Trailer
  • The Draw-Tite hitch you referenced, part # 24839, is indeed a correct fit for your 2011 Kia Soul. This light-duty Class I hitch has a 1-1/4-inch receiver opening. I have linked an installation video for this hitch on your same model year Soul. For some vehicles hitches are available to enable use of accessory items such as bike racks and cargo baskets, but the availability of a hitch for any given vehicle does not necessarily mean that vehicle is suitable for towing a trailer. According to my
    view full answer...

  • What Hitch is Recommended for the 2010 Kia Soul to Tow a Boat Trailer
  • The three 1-1/4-inch hitches we offer for the 2010 Kia Soul are all Class I-rated and have a tongue weight capacity of 200-lbs. These light-duty hitches are ideal for use with accessory items like bike carriers or for light towing. The link provided will take you to our product page for all three hitches. All require temporary lowering of the exhaust for installation. Your Soul owners manual will indicate if it is rated by the manufacturer for towing a trailer; if so the manual will indicate
    view full answer...

  • Ground Clearance with Draw-Tite Trailer Hitch Installed on a 2012 Kia Soul
  • On the 2012 Kia Soul, the Draw-Tite trailer hitch # 24839, measures 9-1/2 inches from the top of the receiver opening to the ground. From the bottom of the receiver it would be 8 inches. I have included a video showing a typical installation on a 2012 Kia Soul that shows this measurement. If you plan on doing some towing you will need ball mount # 3593, hitch pin and clip # PC2, a 1-7/8 inch ball # 19256 or a 2 inch ball # 19258. For trailer wiring you can use # 118431 or, if you have LED lig
    view full answer...

  • Recommended Hitch For 2010 Kia Soul Towing an Aluminum Boat
  • The hitches that are available for your 2010 Kia Soul are all Class I 1-1/4 inch hitches with a 200-lb tongue weight capacity and a 2,000-lb towing weight capacity. You will want to check your owners manual or with the Kia dealer for the towing capacity of your Kia Soul. If it is lower than the 2,000-lb capacity of the hitch you will need to go by that lower number as the maximum weight capacity you can tow. You will want your aluminum boat and trailer, loaded with your cargo, to be belo
    view full answer...

  • Exhaust Tailpipe Rattles Against Draw-Tite Trailer Hitch 24839 on a 2012 Kia Soul
  • We do have a few tips on things you can try to reduce or eliminate exhaust rattle after installing a trailer hitch. I have included a link to an FAQ article that covers the things you can try. In many cases just a slight adjustment is needed.
    view full answer...

  • Recommend Hitch For My 2012 KIA SouL Exclaim
  • I do have a hitch available that will fit your 2012 Kia Soul. The Draw-Tite Trailer Hitch Receiver, part # 24839, has been confirmed to fit the 2012 Kia Soul. If you will be doing light towing, you may be interested in the following items: Wiring, part # 119176KIT Ball Mount, part # 3593 1-7/8 Hitch Ball, part # 19256 If you will be using the hitch for hitch accessories, like bike racks, you will be limited to those that are compatible with Class I hitches. You will want to make sure no
    view full answer...

  • Trailer Hitch and Bike Rack Recommendations for a 2010 Kia Soul
  • All of the trailer hitches for a 2010 Kia Soul will be Class I trailer hitches so you will need a Class I bike rack. Also, a Class I hitch is only capable of supporting up to 2 bikes, but no more. Since you will just be carrying a bike, the Draw-Tite Trailer Hitch, # 24839, would be a good choice since it is just the hitch and does not include a ball mount, pin, or clip. I have included a link to the installation instructions for you. For a compatible bike rack, I recommend the Swagman Trailh
    view full answer...

  • What Tools are Needed to Install a Hidden Hitch Trailer Hitch on a 2011 Kia Soul
  • Our installers use the tools you see because we have them available. But you can install the hitch with hand tools and a car jack at home. You will need the following tools: Torque wrench 17mm Socket and ratchet wrench Phillips head screw driver If you do not have any or some of these tools, some automotive shops will lend tools. I have included a link to the installation instructions for the Hidden Hitch Trailer Hitch, # 60256, for you. If you are planning on doing some towing, th
    view full answer...

  • Compatibility of Curt Class I Receiver Part # 11110 with 2011 KIA Soul
  • Our contacts at Curt Manufacturing have confirmed that the Curt Class 1 receiver, part # 11110 is a fit for all models of the 2011 KIA Soul. We have not yet had the opportunity to complete an installation on a 2011 model. If you are planning on using your receiver to tow a small trailer, you will need the wiring harness, part # 118431 and either a 2 inch ball, part # A-82 or a 1-7/8 inch ball, part # A-80. If you are using a bike rack or other non-trailer load, be aware that Curt requires
    view full answer...

  • Bike and Snowboard Rack Options for 2011 Kia Soul
  • The Class I receiver has a limited tongue weight capacity of 200 lbs. Tongue weight is the maximum amount of weight that can be safely suspended from the receiver without causing damage. Due to these limits, the bike rack you specified can be used, but ONLY two bikes may be carried on it. The hitch itself weighs around 20 lbs, which should not cause any issues. I spoke with one of my contacts at Yakima, the manufacturers of Rhode Gear bike racks, and was told that the Yakima HitchSki has
    view full answer...

  • How Much Ground Clearance Will I Lose if I install Hidden Hitch # 60256 on my Kia Soul
  • I spoke with my contact at Hidden Hitch and he informed me that it will take about 1-1/2 inches off of the rear ground clearance on your Kia Soul. I have attached a link to the instructions below for you to check out. Also, there is a picture of a Kia Soul with a similar hitch installed on it to the right for you to check out. You may also be interested in the following products to complete your towing setup: T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, part # 118431 (chec
    view full answer...

  • What Is The Stabilizing Strap That Is Needed For A Curt Class I Hitch On A 2010 Kia Soul
  • The Curt Bike Rack Strap, # 18050, will attach to the bike rack and the other end to the vehicles trunk lip or window. It gives added support and stability to the bike rack and keeps the movement of the bike rack to a minimum, which puts less stress on the hitch. The manufacturer (Curt) requires the use of the stabilizing strap on all of their Class I hitches. Because the Class I hitches have a lower tongue weight capacity they do not want any added strain to be put on that hitch. I am se
    view full answer...

  • Can I Purchase the Curt Class I HItch 11110 Without the Ballmount and Pin and Clip
  • The ballmount, pin and clip are packaged with the hitch and the installation hardware and we cannot separate them. Curt includes them, because on Class I and II hitches, only certain ball mounts should be used. If you do not want a hitch with the draw bar and pin and clip, I would suggest Draw-Tite part # 24839. Yes, you can use a load carrier or a cargo carrier on either of these hitches, so long as the cargo carrier is designed for use with 1-1/4 inch Class I hitches. The tongue weight c
    view full answer...

  • Recommended Trailer Hitch and Adapter to Use a Yakima 2 Bike Rack With a 2010 Kia Soul
  • There are adapters available like part # HTAD to convert a 1-1/4 inch hitch opening to a 2 inch opening. However, using any adapter will cut your hitch capacity in half, so you will need to ensure that the weight of the bike rack, bikes, and any items in your rear cargo area will not exceed 100 pounds total. The hitches available for your 2010 Kia Soul are class I, with a 200 pound tongue weight rating. When you add the adapter into the equation your hitch capacity would drop to 100 pounds
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email



Only 18 Hours 54 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com