Kia Sorento Brake Controller with Wiring

change vehicle

Select Kia Sorento Year

--Select Year--2013201220112009200820072006200520042003

Available Years for Kia Sorento Brake Controller with Wiring

2013

2012

2011

2009

2008

2007

2006

2005

2004

2003

Trailer Brake Controllers

Proportional Brake Controller

Time Delay Brake Controller

Air to Electric Brake Control

Universal Brake Controller Wiring Kit

Wireless RF Brake Controller

Trailer and Brake Parts

Trailer Breakaway Kits

Trailer Brakes

Trailer Hubs and Drums

Trailer Tires and Wheels

Brake Actuator Couplers

Wire, Adapters and Trailer Harness

Brake Controller Manufacturers

Tekonsha Brake Controller

Hopkins Brake Controller

Draw-Tite Brake Controller

Hayes Brake Controller

Dexter Brake Controller

Kia Sorento Brake Controller Questions and Answers

• Parts Needed to Install a Trailer Brake Controller on a 2011 Kia Sorento
  
• Brake controllers are not vehicle specific so you can install any controller you want on your 2011 Kia Sorento. For your vehicle it is a hardwire situation and you will need a few parts for the installation. First, if the vehicle does not have a 4-Way trailer connector, you will need to add one using # 118506 if you have a 4 cylinder or other model WITHOUT the towing prep package. If you do have the towing prep package, use # 118541. I have linked instructions for both harnesses for you.
  view full answer...


• Should 12 Volt Hot Lead on 7-Way Trailer Connector Be Hot All the Time, WIll it Drain the Battery
  
• The light that indicates that the 12 volt circuit is hot is normal and it will not drain the battery. Think of it as the battery having a really long positive terminal that just extends to the rear of the vehicle. If nothing is drawing power from it, it will not drain the battery. If you did have a trailer connected, for example, and that trailer used the 12 volt circuit for an accessory that remained on all the time, that would draw power from the vehicle power and could potentially drain th
  view full answer...


• What Parts Are Need to Install Tekonsha Prodigy Brake Controller on a 2006 Kia Sorento
  
• Yes, would be able to use the same brake controller in your 2006 Kia Sorento. You will need to hardwire the controller to the Sorento and add a 4-Way and 7-Way connector at the back of the Sorento. First you will need to install a 4-Way trailer connector. The T-One harness for your 2006 Kia Sorento is part # 118307. After you install the 4-Way, you will need to install a 7-Way trailer connector. The 4-Way connects to a matching connector on the 7-Way, part # ETBC7. There are 4 loose wires
  view full answer...