view cartView Cart
Only 4 Hours 3 Minutes Remaining


Kia Sedona Trailer Hitch

change vehicle

Select Kia Sedona Year

Trailer Hitch

Custom fit Trailer Hitch for your:



Available Years for Trailer Hitch



Trailer Hitches for Kia Sedona

Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Torklift to fit your Kia Sedona. Choose the hitch that is right for your towing needs and your budget.

All hitches come with a limited lifetime warranty and are manufactured in the USA.

We offer over a custom hitch for virtually every Kia Sedona on the road.




What our customers are saying:

Received my Hidden Hitch for my Expedition. Had it installed in about 30 minutes with no help. Thanks for making it easy.

Jim

Cornelius, NC






Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers






Kia Sedona Trailer Hitch Videos

Trailer Hitch Installation - 2006 Kia Sedona - Curt

Today, on our 2006 Kia Sedona were going to install part number C13345 from Curt. This is what the hitch looks like when its installed on the vehicle. Next, well give you some measurements to help you out in selecting some accessories such as a ball mount, bicycle rack, or a cargo carrier. From top of receiver opening down to the ground will be 12-1/4 inches, and from center of the hitch pin hole to the edge of the bumper is going to be about 5-1/2 inches. Now Ill go ahead and show you how the hitch is installed.First thing we want to do is go ahead and point out the mounting locations from the hitch. Looking at the drivers side frame rail, therere three threaded holes.



Trailer Hitch Installation - 2012 Kia Sedona - Curt

Today on this 2012 Kia Sedona were going to install part number c13345 from Curt. This is what the hitch looks like when its installed on the vehicle. Next well go ahead and give you some measurements that will help out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be 12-1/4 inches and from the hitch pin hole to the edge of the bumper will be 5-1/2 inches. Now well go ahead and show you how the hitch is installed. First thing we are going to do is go ahead and lower the exhaust and get it out of the way.



Trailer Hitch Installation - 2010 Kia Sedona - Curt

Today in this 2010 Kia Sedona were going to install part number c13345 from Curt. Alright this is what the hitch looks like once installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories. From the center of the hitch pin opening to the edge of bumper were looking at five and three quarter inches and from the top to the receiver opening down to the ground is 11 inches. No well go ahead on how the hitches installed and the hitches install some frame here, here and here. Let me just thread a holes on the frame but we need some time up to clean.



Trailer Hitch Installation - 2012 Kia Sedona - Draw-Tite

Today on this 2012 Kia Sedona we're gonna install part number 75421 from Draw-Tite. Alright! This is what the hitch looks like when it's installed on the vehicle. Next we'll give you some measurements that will help you out in selecting some accessories such as a bike rack or a cargo carrier. From the center of our hitch pin hole to the outside edge of the bumper is going to be 4-1/2 inches and from the top of the receiver opening down to the ground will be 12 inches. Now we'll go ahead and show you how the hitch is installed. The first step in our install is to go ahead and get the exhaust out of the way so we can see the one, two, three attachment points for the hitch.



Trailer Hitch Installation - 2012 Kia Sedona - Hidden Hitch

Today on this 2012 Kia Sedona, were going to install part number 70761 from Hidden Hitch. Alright, this is what the hitch looks like when its installed on the vehicle. Next, well give you some measurements to help you out in selecting some accessories such as a bike rack or a cargo carrier. From the center of the hitch pinhole to the outside edge of the bumper is going to be 4-1/2 inches and from the top of the receiver opening down to the ground will be 12 inches. Now, well go ahead and show you how the hitch is installed. The first step in our install is to go ahead and get the exhaust out of the way.



Trailer Hitch Installation - 2010 Kia Sedona

Today on this 2010 Kia Sedona, we are going to install part number 70761 from Hidden Hitch. This will also apply to part number 75421 from Draw-Tite. This is what the hitch looks like installed on the vehicle. Next we will give you some measurements that will help you our when ing a ball mount, bike rack, or cargo carrier. From the top of the receiver opening to the ground is 12 inches. From the center of the hitch pin to the outside edge of the bumper is 4-3/4 inches. Now we will show you how the hitch is installed on the vehicle. :31



Trailer Hitch Installation - 2006 Kia Sedona

Today on this 2006 Kia Sedona we will be installing Valley hitch part number V81572. Before we get started with the hitch installation we are going to give you a couple of final installed dimensions that will help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 11 inches. From the center of the pin hole to clear the rear edge of the bumper is going to measure approximately 7 inches. Now we will move on to the installation. 00:24



Trailer Hitch Installation - 2008 Kia Sedona

Today on this 2008 Kia Sedona we are going to install part number 70761 from Hidden Hitch. This will also apply to part number 75421 from Draw-Tite. The first thing we need to do is lower the exhaust and get it out of the way. To lower the exhaust we are going to remove these two bolts on this hanger. Next we will move up towards the front of the vehicle and remove the two rubber hangers for the muffler. :34





Kia Sedona Trailer Hitch Questions and Answers


  • Why 2010 Kia Sedona EX, LX and Base Models Use Different Hitches
  • By 6 bolt rear, I am assuming you are speaking of the number of attachment points for the hitch. The exhaust configuration is different on the Base model versus the EX or the LX model, so the hitches are designed differently to fit around the exhaust. The base Sedona model will use 7 bolts to attach the hitch to the vehicle, 3 on the drivers side and 4 on the passenger side. For the base model, use the Draw-Tite # 75551, the Hidden Hitch # 87443 or the Curt # 13349. I would recommend...
    view full answer...

  • Cleaning Out Corroded Weld Nuts to Install a Trailer Hitch on a 2007 Kia Sedona
  • Corrosion and road grime can get inside of vehicle weld nuts on any vehicle that has seen at least one winter. This is most likely the case you are facing. There is a solution. You will need to lean out the weld nuts using a spray lubricant and a wire brush like # DW00254. I have included links to a video and FAQ article that will show you how to clean out the weld nuts for hitch installation.
    view full answer...

  • Trailer Hitch for a 2007 Kia Sedona LX Long Wheel Base
  • What you can do is measure the wheel base of your 2007 Kia Sedona to determine if you need the long wheel base hitch, # C13345 or the short wheel base hitch, # 13349. The long wheel base is 119 inches. The short wheel base will be 113.8 inches. Measure from the center of the front wheel to the center of the rear wheel. From what we have found, the LX and EX models are long wheel base models. They will also have a third row of seating. I still recommend measuring to be sure. For...
    view full answer...

  • What is the Distance Between the Bolt Holes of the Curt Trailer Hitch Receiver # C13340
  • I went out into our warehouse and measured a Curt Trailer Hitch Receiver # C13340 and found the distance from the bolt hole center to bolt hole center was 36-1/2 inches. Check out the picture I attached to see this measurement. If you measured from the inside of the bolt hole to the inside of the other bolt hole and came up with 36 inches you should still be fine since the bolt holes are slotted for extra flexibility when installing this hitch. Sometimes hitches can get slightly bent...
    view full answer...

  • Trailer Hitch Recommendation for a 2012 Kia Sedona
  • The Hidden Hitch Trailer Hitch Receiver # 70761 would work well for your 2012 Kia Sedona. You may also be interested in the following products to complete your towing setup: Tow Ready Trailer Wiring # 119176KIT (instructions and installation video attached) Ball Mount 2-3/4 inch Rise or 4 inch Drop # 2753 Hitch Ball with 2 inch Diameter and Medium Shank # 19247 Hitch Ball with 2-5/16 inch Diameter and Medium Shank # 19287
    view full answer...

  • Will I Need to Lower my Tail Pipe to Install the # 70761 Hitch on a 2011 Kia Sedona
  • Yes, it is necessary to lower the tail pipe to install the Hidden Hitch Trailer Hitch for the 2011 Kia Sedona, part # 70761, on your vehicle. It may seem like it would be difficult to do, but with the right tools you should have no problem. We rated the difficulty on this install to be a 3 out of 10, this means it should only take you about 30 minutes to complete the install from start to finish. To remove the exhaust bolts, it may be necessary to use a lubricant like LubriMagic...
    view full answer...

  • Verification of Trailer Hitch Fit for a 2010 Kia Sedona with 118.9 inch Long Wheel Base
  • I checked with my contact at Hidden Hitch and Draw-Tite and found that the Hidden Hitch Class III Round Tube Trailer Hitch, item # 70761, and the Draw-Tite Class III Trailer Hitch, item # 75421, will both fit the 2010 Kia Sedona LX with 118.9 inch wheel base. My contact stated that the hitch is a carryover from 2009 and needed no changes for your vehicle. I also checked with another hitch manufacturer and their fitguide also lists the same hitch for the 2009 model and the 2010 model...
    view full answer...

  • How Do I Tell if My Kia Sedona is Short Wheel Base or Long Wheel Base
  • I did some research and the Sedona is Short Wheel Base -SWB. If it is a Sedona LX or a Sedona EX it is a Long Wheel Base-LWB. The best way to be sure is to measure. Measure from the center of the front wheel to the center of the rear wheel. If the measurement is 113.8 inches, it is SWB. If the measurement is 118.9 inches, it is LWB. The hitch for SWB models is the Curt hitch, part # 13349. There are two hitches for the LWB, Hidden Hitch part # 70761 and Draw-Tite part # 75421.
    view full answer...

  • How Can I Tell If 2009 Kia Sedona Is Short Or Long Wheel Base And What Hitch To Use
  • On the 2009 Kia Sedona, the long wheelbase has the third row seating that will fold into the floor. The short wheelbase does not have that feature. The Draw-Tite Trailer Hitch, # 75421, is for the long wheelbase Kia Sedona. It is a bolt-on application with no drilling required. If you have the short wheelbase Kia Sedona then you will use the Draw-Tite Trailer Hitch, # 75551. The installation on this hitch does require removal of the tie-down hook and there is a access hole on the...
    view full answer...




Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email





Only 4 Hours 3 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com