Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Honda. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Honda on the road.
What our customers are saying:
Thanks for getting me the two Hitches by the weekend. They arrived at my door on Friday night as I had asked. Thanks again
Rich
Morgan Hill, CA
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
Hitch Accessories
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 2007 Honda Civic - Curt
Today on our 2007 Honda Civic, we'll be installing the Curt Hitch part number 11437. This is what our hitch will look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 3 inches. From the top of the receiver tube to the ground is 10-3/4 inches. Those will assist you with selecting accessories such as a bike rack or a cargo carrier.
Trailer Hitch Installation - 2012 Honda Civic - Curt
Today, on our 2012 Honda Civic, well be installing the Curt Hitch part number 11437. This is what our hitch will look like once its installed. Next, well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outer most edge of the bumper is 3 inches. From the top of the receiver, tube to the ground is 11 inches. This will assist you with selecting accessories such as a bike rack or cargo carrier.Now, lets go ahead with the installation.
Trailer Hitch Installation - 2012 Honda Civic - Hidden Hitch
Today on this 2012 Honda Civic Hybrid we'll be installing the Hidden Hitch, part number 60822. Here are a few measurements that will help when selecting accessories for your new hitch such as a bike rack or cargo carrier. From the center of the hitch pin hole to the edge of the bumper will be 4 inches and from the top of the receiver tube to the ground will be 11 inches. Now we'll go ahead with our install. To begin our install, we'll need to remove the plastic shroud on the driver's side. There are four pushpins and three 10-mm bolts holding it up.
Trailer Hitch Installation - 2012 Honda Civic - Draw-Tite
Today on this 2012 Honda Civic Hybrid we'll be installing the Draw-Tite Hitch, part number 24763. Here are a few measurements that will help when selecting accessories for your new hitch such as a bike rack or cargo carrier. From the center of the hitch pin hole to the edge of the bumper will be 4 inches and from the top of the receiver tube to the ground will be 11 inches. Now we'll go ahead with our install. To begin our install, we'll need to remove the plastic shroud on the driver's side. There are four pushpins and three 10-mm bolts holding it up.
Trailer Hitch Installation - 1994 Honda Civic
Today on this 94 Honda Civic, were gonna install part number 24677 from Draw-Tite. This will also apply to part number 60834 from Hidden Hitch. Alright, this is what the hitch looks like when its installed in the car. Next well give you some measurements thatll help you out in selecting your accessories. From the top of the receiver opening down to the ground is going to be 11 3/8, from the center of the hitch pinhole to the outside edge of the bumper is going to be 2 inches. Now well go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2010 Honda Civic
Today on this 2010 Honda Civic were going to install part number 24763 from Draw Tite. Alright this is what the hitch looks like when it is installed. Next well give you some dimensions that will help you out when choosing accessories. From top of receiver opening down to ground were looking at 11-3/4 inches, and from the center of the pin hitch hole to the outside edge of the bumper on this vehicle is going to be 2-1/2 inches. Now I will go ahead and show you how the hitch is installed. There is one hanger right above the tail pipe; well spray it down with some lubricant to make it a little easier to move.
Trailer Hitch Installation - 2009 Honda Civic
Today on this 2009 Honda Civic we are going to install part number 11437 from Curt. This is how the hitch looks installed on the vehicle. We will give you a couple of measurements to help you out and choosing some accessories for this vehicle. From the top of the receiver opening down to the ground on this particular vehicle is going to be 11 inches and from the center of the hitch pin hole to the outer edge of the bumper is going to be about 3-1/ 2 inches. Next we will show you how it was done. The first thing we need to do is lower the exhaust. There will be just one rubber hanger right behind the exhaust tip and we just need to undo that one and lower it out of the way. Spray it down with some lubricant and then just pry it off. 00:37
Trailer Hitch Installation - 2008 Honda Civic
Today on this 2008 Honda Civic we are going to be installing part number 11437 from Curt. First thing we need to do is get underneath the vehicle. We need to get rid of this plastic shroud that is underneath the truck pan. There will be a verity of fasteners on the shroud ranging from plastic rivets to threaded bolts. Next we will go ahead and lower the exhaust itself. It will be one rubber hanger at the very end of the muffler that we will remove and use that to lower everything. :47
Trailer Hitch Installation - 2002 Honda Civic
Today on this 2002 Honda Civic, we are going to be installing part number 24706 from Draw-Tite. And this also applies to Hidden Hitch part number 60867. OK, the first thing that I am going to do is go ahead and show you the mounting locations for our hitch. It is going to be the existing hole right here and it is going to be the same on both sides. We are also going to mount here to the tow loop. Now, in order to put our hitch up, we are actually going to have to fish wire our carriage bolt and block through this existing hole here. But, it is not wide enough so we are actually going to have to make it a little wider so our parts can fit through. We are just going to use a hammer and a chisel. We are just going to check and see if our block fits through. And it seems like it does so that is a good sign. 0:41
Trailer Hitch Installation - 2007 Honda Civic
Today on this 2007 Honda Civic we are going to be installing Draw-Tite hitch part number 24763. This installation will also apply for Hidden Hitch part number 60822. We are underneath the vehicle, taking a look at the passenger side frame rail first, we are going to do a couple of things in preparation before we can get started installing our trailer hitch. First thing we need to do is lower the exhaust off the rear most hanger right here. What you want to do is spray down the two studs on the exhaust here with a spray lubricant, like a WD-40, and just take a pry bar or a screwdriver if you do not have one and pry those off of there. The exhaust will then come down for you and give you more room to work. :47
Today on this 2009 Honda Civic we will be installing Draw-Tite hitch part number 24763. This installation will also apply for the Hidden Hitch part number 60822. We are underneath the vehicle and we are actually looking at the passenger side frame rail. We need to do a couple of things in preparation before we can actually get started pointing out the mounting holes for the trailer hitch. As you can see we have got our exhaust here on the passenger side. We need to go ahead and lower it down to get it out of the way. To do that we are going to remove it off of its rubber hanger here using just a spray lubricant like a WD-40. Before we can remove the heat shield, we need to actually remove this plastic shroud from underneath here. Because the fourth bolt for the heat shield is actually covered by our shroud.
Trailer Hitch Installation - 2008 Honda Civic Hybrid
Today we are going to install part number 24763 on our 2008 Honda Civic hybrid model. The hitch is going to install above the exhaust on this frame rail behind the heat shield right here. It wraps all the way around the muffler. It is also going to attach to the tow hook right here. Also on the frame rail over here just on this side of the shroud. The first step is to remove the exhaust and also, to do that, we need to remove the rubber isolator from the exhaust muffler. And that will give us some wiggle room. Next we have to unbolt this heat shield right here. Alright next what needs to happen is that this rivet right here has to be removed. We will put it back up when we are done. What we are going to do now is go ahead and hang the hitch. We are going to start off at the tow loop. As you can see, we have the U-bolt hanging down from it. It might be a good idea to have an extra set of hands to work around the muffler.
