GMC Yukon XL Brake Controller with Wiring

change vehicle

Select GMC Yukon XL Year

--Select Year--20132012201120102009200820072006200520042003200220012000

Available Years for GMC Yukon XL Brake Controller with Wiring

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

Trailer Brake Controllers

Proportional Brake Controller

Time Delay Brake Controller

Air to Electric Brake Control

Universal Brake Controller Wiring Kit

Wireless RF Brake Controller

Trailer and Brake Parts

Trailer Breakaway Kits

Trailer Brakes

Trailer Hubs and Drums

Trailer Tires and Wheels

Brake Actuator Couplers

Wire, Adapters and Trailer Harness

Brake Controller Manufacturers

Tekonsha Brake Controller

Hopkins Brake Controller

Draw-Tite Brake Controller

Hayes Brake Controller

Dexter Brake Controller

GMC Yukon XL Brake Controller Videos

Trailer Brake Controller Installation - 2013 GMC Yukon XL

Today on our 2013 GMC Yukon XL were going to install part number 90885 from Tekonshia. This is a P2 brake controller. The first thing we need to do is go ahead and locate the wiring harness for the brake controller. Now its wires that are located underneath the dash, off to the left hand side. Well go ahead and pull those down, and well go ahead and strip the wires and put on our bug connectors. Now well go ahead and hook up our wires.

GMC Yukon XL Brake Controller Questions and Answers

• Troubleshooting Trailer Backup Lights Hooked Up To 2008 GMC Yukon XL
  
• After talking to some of my fellow experts, I may have a solution for you. The cause of your issue may be that the connectors have built up corrosion since the last time you have used them and it is causing the power to be blocked or be sent down a different wire. You will want to check your connectors to ensure they are free of corrosion and moisture. It is also possible that the wiring may not be connected properly or that it may be damaged. You can use a circuit tester such as the # 3808 t
  view full answer...


• Trailer Brake Controller Wiring Harness Location on a 2011 GMC Yukon XL
  
• I have included a link to a video that might help you. The wires are usually located under the dash, left of the steering column. They are held together with a white tag. But like our installer says in the video, the wire bundle can be tucked up way inside and you will need to fish around and possibly use a flash light to locate them. For a brake controller, I recommend the Tekonsha P2, # 90885. It is one of our best selling brake controllers because it is easy to set up and easy to use. It c
  view full answer...


• Parts Needed to Install a Prodigy P3 Brake Controller on a 2010 GMC Yukon
  
• There are a couple of small items you may need when installing the P3 Brake controller on your 2010 GMC Yukon with factory trailer wiring package. We have an informational article that details the installation and location of wires on your vehicle that you will need, see link. The only parts that you might need are the M6-1.0 nut, # 185916, and M8-1.25 nut, # 185917, to secure the wires to the power studs at the front of the power distribution box if that step was not completed at the GM a
  view full answer...


• Tekonsha P2 Brake Controller Recommendation for a 2011 GMC Yukon XL
  
• No plug is present under the dash, but the wires are already run. You only need to connect the Tekonsha Prodigy P2 brake controller # 90885 wiring with the vehicle wiring already present under the dash. The # 90885 is one of our best selling brake controllers because of how easy it is to setup and how well it works. There is also a couple connections that need to be made under the hood of your vehicle. Check out the FAQ article I attached on installing a brake controller on a GM vehicle su
  view full answer...


• Trailer Brake Controller Recommendation for a 2003 GMC Yukon XL and 2012 Crossroads Sunset Trailer
  
• For your 2003 GMC Yukon XL, I recommend the Tekonsha P2, # 90885. It is one of our most popular controllers because it is easy to set up and use and it offers diagnostics. The P3, # 90195, is a great controller but is geared more towards individual with brake controller experience. It has a lot of diagnostics and features, though and would work well. Both controllers are compatible with electric trailer brake systems as well as electric over hydraulic systems. For your Yukon XL, you will just
  view full answer...


• Electric Over Hydraulic Brake Controller Recommendation for a 2005 GMC Yukon XL
  
• For your application, I would recommend the P3 Proportional Brake Controller, item # 90195-3015P, which is compatible with electric over hydraulic braking systems. The included adapter, # 3015-P will plug in under the dash on your Yukon XL. I have included an article on installation of a brake controller on 1999-2006 GM trucks and SUV vehicles. For a Hard wire connector you can use the 7-Pole, RV-Style Trailer Socket, item # PK12707, along with the # PK12711U mounting bracket or if you need a
  view full answer...


• Is There Brake Controller Wiring For Tekonsha P-3 Brake Controller, # 90195, On 2009 GMC Yukon XL
  
• Starting in mid year 2007 all the GM trucks quit offering the plug in connectors for brake controllers with a factory tow package, but they still have the wires under the dash for installing the Tekonsha P-3 Trailer Brake Controller, # 90195, on your 2009 GMC Yukon XL. The wires are identified by a white label and are located under the left side of the instrument panel to the left of the steering column. These wires under your dash can be connected to the brake controller wires. I am sending
  view full answer...


• Installing a Brake Controller on a 2008 GMC Yukon Denali XL AWD with Factory Tow Package
  
• To install the Tekonsha P2, # 90885, in your 2008 GMC Denali, there are only a few simple steps to follow. With a factory tow package, all you will need is the brake controller itself. The unit comes with blunt cut wires that will need to be installed to the factory tow package wiring harness on your vehicle. This harness is located under the dash, to the left of the brake pedal, and usually held together with white tape. Pull the harness down and you can begin to connect the brake controller
  view full answer...