GMC Sierra Front Mount Trailer Hitch

change vehicle

Select GMC Sierra Year

--Select Year--20132012201120102009200820062005200420032002200120001999

Available Years for GMC Sierra Front Mount Trailer Hitch

2013

2012

2011

2010

2009

2008

2006

2005

2004

2003

2002

2001

2000

1999

Front Mount Hitch Accessories

Winches

License Plate Bracket

Accessory Steps

Winch Mounting Plates

Skid Shield

Boat Trailer Parts

Hitch Mount Spare Tire Carrier

Ballmounts

Trailer Wiring and Adapters

GMC Sierra Front Hitch Videos

Front Mount Trailer Hitch Installation - 2011 GMC Sierra

GMC Sierra Front Hitch Questions and Answers

• Front Mount Trailer Hitch Options for a 2005 GMC Sierra 1500 LD
  
• For a 2005 GMC Sierra 1500LD (light duty) you can use either Curt front mount # 31302 or Draw-Tite # 65023. I have linked the instructions for both of these hitches for you to view. We show # 65028 as only fitting the HD models.
  view full answer...


• Can the Curt Front Mount Hitch Support a Winch on a 1999 GMC Sierra Z71
  
• Yes, the Curt Front Mount Hitch, # 31302, will be strong enough to mount and use a receiver mount winch. This hitch has a 500 lb vertical load capacity and a 9,000 lb line pull capacity. This hitch has a standard 2 inch receiver that is compatible with most hitch mounted winch plates. It is important to check the axle capacity of your front axle as well to ensure you do not exceed the capacity of the front axle. If you do not already have a winch plate, I recommend looking at the Curt Winch
  view full answer...


• Front Mount Trailer Hitch Options for a 2001 GMC Sierra 2500
  
• First, for a 2001 GMC Sierra 2500 the correct front mount hitch is going to be # 65028 from Draw-Tite or # 31108 from Curt. The hitch you referenced # 31049 is for Ford vehicles. I have included links to the installation instructions for each of the hitches that will fit your truck so you can see what each installation entails. There is no drilling required on the Draw-Tite or Curt hitches unless you will need to enlarge some holes. No new holes will be drilled.
  view full answer...


• Will a Front Mount Trailer Hitch Interfere with a Fisher Minute Plow on a 2002 GMC Sierra 2500HD
  
• In order to determine if the front mount trailer hitch # 650287 will interfere with the plow on the 2002 GMC Sierra 2500HD, you will need to look at the installation instructions for the hitch. I have included a link to them for you. If you compare the places where the hitch needs to mount to the vehicle with where the plow mounts you can determine compatibility. Nine times out of ten, there are compatibility issues because both a hitch and front mounted items attach to the points on the vehicle
  view full answer...


• Front Mount Trailer Hitch for a 2000 GMC Sierra 1500 2WD 4 door Pickup w/ 5.3 V8 new Body Style
  
• Since you do not want to drill the frame of your 2000 GMC Sierra 1500, you will want to go with the Curt trailer hitch # 31302. The benefit of this hitch is that you can install it with the receiver below the front fascia or to exit out higher which will require trimming in most cases. This is why it bolts to the brackets. Curt hitches are often times less expensive, but not always. It just depends on the part. The quality of the product is on par with the Draw-Tite hitch # 65023. The Curt hi
  view full answer...


• Is Front Fascia Trimming Required to Install a Front Trailer Hitch on a 2011 GMC Sierra 2500HD
  
• If you take a look at the instructions for the Curt front mount hitch that I have linked for you, you will see a note that states the lower bumper fascia strip may need to be trimmed or removed to allow clearance for the receiver tube. The other front mount hitch for your 2011 GMC Sierra 2500HD is # 65056. It does require fascia trimming and relocation of the front license plate holder. I have included a link to the installation instructions for this hitch as well.
  view full answer...


• Can a Front Mount Trailer Hitch be Used for a Bike Rack on a 2010 GMC Sierra 2500HD
  
• It is possible to use a bike rack on a front mount trailer hitch like # 31109. There can be some issues though. First, it will hinder driver visibility. You just will not be able to see as much of the road. Second, the bikes may block the head lights or other indicating lamps on the truck which could be dangerous. And third, the bikes could restrict airflow and cause the truck to run hot. If you cannot put the bikes in the rear because you are towing a trailer, you may be able to use the Curt
  view full answer...


• Is Fascia Trimming Required For Installation of Curt Front Mount Hitch # 31109 on a 2010 GMC Sierra
  
• You are correct, the Curt Front Mount Hitch for the 2010 GMC Sierra, # 31109, does not require trimming for installation. I have provided a link to installation instructions and a video installation that you should find helpful. I have also linked a photo of the hitch installed on a 2008 Model HD Chevrolet Pickup, which is the same body style, for you to review.
  view full answer...


• Does the Receiver Come Out Below the Bumper on a Draw-Tite Front Hitch # 65028 on a 2006 GMC Sierra
  
• I checked out the installation instructions for this Draw-Tite Front Mount Trailer Hitch # 65028 and it will bolt to the bottom of the frame rail. The hitch opening will come out below the bumper and not through the opening behind your license plate. I attached the installation instructions for you to check out also.
  view full answer...


• Will Curt Front Mount Trailer Hitch # 31108 Fit a 2002 GMC Sierra 1500HD
  
• According to Curt Manufacturing, the Front Mount Hitch, # 31108, will fit your 2002 GMC Sierra 1500HD. I have included a link to the installation details for this hitch. Another front mount trailer hitch that will fit is Draw-Tite Hitch, # 65028. I have included a link to the installation instructions for this hitch as well.
  view full answer...


• Front Mount Hitch for a 2002 GMC Sierra 2500HD for using a Fisher Minute Mount Plow
  
• The Curt front mount hitch, part # 31108, will fit your 2002 GMC 2500. It provides a standard 2 inch receiver opening, so if that is what the Fisher plow needs, you should be set. I would double check with Fisher or the plow instructions to make sure what kind of attachment it needs. The hitch has a tongue weight capacity of 500 pounds and a gross load capacity of 5,000 pounds. I have added a link to the instructions below.
  view full answer...