Ford F-150Tonneau Covers

Bestop EZ Fold Folding Tonneau Cover Installation - 2006 Ford F-150

Today on our 2006 Ford F150 well be installing the Best Top EZ Folding Tonneau cover, part number B1611101. First before we install the tonneau cover well go ahead and remove the protective cover from the weather strip. Simply peel it back and remove it, setting it aside. Now well go ahead and take the tonneau cover, put it up on the bed rails nearest the cab, lining the front edge up with the bulk head of the truck bed. Now well go ahead and adjust it, make it even from side to side. Now with the tonneau cover in position well go ahead and get underneath the tonneau cover, lower the clamp, slide it into place.

Access Toolbox Edition Tonneau Cover Installation - 2012 Ford F-150

Today, on this 2012 Ford F-150, we will be installing the Access roll-up Tonneau cover, part number 834532004782. Our first step will be to install the weather seal at the bulkhead, which is the front wall of the truck bed. We will take our alcohol prep pad, clean the surface, then peel back the 2-way adhesive and adhere the seal to the bulkhead. Then, we are going to go ahead and put our truck box in place, tighten it down so that we can install the front header bar of our Tonneau cover. We will push this up against the truck box with the weather seal facing the box and adhere the side rails with the clamps provided. Now, with our header bar in place, we can go ahead and start attaching the side rail.

Bestop EZ Fold Tonneau Cover Installation - 2010 Ford F-150

Today on this 2010 Ford F-150 we are going to install the EZ Fold Tonneau Cover from Bestop. We are going to be using part number B1611101. Installing this Tonneau cover is relatively easy. It is very light to install but it is always a good idea to have an extra set of hands. All you have to do is start with the Tonneau cover and just fold it up into position and set it on the rails closest to the cab of the truck. Take it and line it with the front edge of the bed itself. You will notice the clamps are built on to the Tonneau cover itself and it is adjustable left and right to accommodate different bed widths and basically what you do is slide it over and adjust the clamp up and down as needed so you can start off with the clamp as close to the rail as possible. 00:40

TruXedo Lo Pro QT Tonneau Cover Installation - 2001 Ford F-150

Today on this 2001 Ford F-150 super crew, we are going to install part number TX590601 from TruXedo. This is their QT tonneau cover. The first thing we want to do is go ahead and lay out our parts and we are going to work with our side rails first. If you notice, on the rails here they have these slots right here and the edges are kind of sharp. So, the kit comes with these simple little covers that you just snap over the edges. Then go ahead and go on to the rest of the slots and cover those up. We can go ahead and start installing the first rail. 032

Access LiteRider Tonneau Cover Installation - 2010 Ford F-150

Today on this 2010 Ford F-150, we are going to install part number 834532004737, the Access tonneau cover LiteRider. The first thing that we need to do is install the side rails that go into the bed of the truck. Alright, we are going to take our first rail. We are working with the driver side. We are just going to hold it up to the inside edge of the top rail of the truck and we will make sure that this edge is flush with this or maybe a little bit higher will work just fine. You will notice on the rail here that we have this plastic edge here. That is where the back part of the tonneau cover locks into place. You want to have this towards the back of the truck when you install the rails. Scoot it all the way towards the front and make sure that touches the front rail. Once we have it the way we want, we are just going to use a clamp just to hold it in place. We will start working on the clamps that will hold it permanently in place. Take your clamp, push it into place. I like to go as far as I can on the inside edge of the rail and try to go as far back as possible. 1:03

TruXedo Deuce Tonneau Cover Review

Today we are going to install part number TX777601 from TruXedo. This is their Deuce Tonneau Cover. First we will show you how it installs. Some tonneau covers actually sit on top of the rails. In this case, it is actually going to sit on the inside edge of the rail itself. We will start off by installing the rails first. It is kind of a good idea to have an extra set of hands here. What you want to do is mount it up against the side of the rail and push this little seal here against the tailgate just a little bit. When you have got it into the position you want, go ahead and take the clamps and install it onto one side of the rail and on the inside of the bed rail. What you are aiming for here is to actually have this as level as possible. All right, next what we will do is install the rails that actually support this while it is in use. We will just fold this out of our way, and the rail will get installed like this. Try to get it as even as possible with the other rail and then clamp it in place just like the first one.

TruXedo TruXport Tonneau Cover Review

Today we are going to install a tonneau cover on our 2009 Ford F-150. We will use a tonneau cover from TruXedo. And it is going to be our TruXport tonneau cover, and its part number is going to be 298101. To begin our install, we have to install a couple of seals that go on the very corners of the rails themselves. It is a stick-on affair, so it is pretty easy to do. All right, next we will go ahead and take the tonneau cover itself and the front rail and go ahead and put that onto the truck. That can be simply right up front for now.