Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Ford. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Ford on the road.
What our customers are saying:
You guys are lifesavers! I live in a little bitty town down here in South-Central Missouri, and finding someone who carries a hitch for my car has been a nightmare! I was thrilled when I came across your site, and can't thank you enough for having the parts I needed and for shipping so promptly. Thanks again, and have a wonderful weekend!
Jessalynn
Mountain View, MO
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
Hitch Accessories
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 1996 Ford F-150 - Curt
All right. Today on this 1996 Ford F150 were going to install part number 14001. All right. This is what the hitch looks like when its installed on the vehicle. Next, well give you some measurements that will help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver down to the ground will be about 17 inches.
Trailer Hitch Installation - 2005 Ford F-150 - Curt
Today on our 2005 Ford F-150, we will be installing the Curt Hitch, part number C13352. This is what our hitch will look like once its installed. Next we will go ahead and give you a couple measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is three inches. From the top of the receiver tube to the ground is 16-3/4 inches. This will assist you in selecting accessories such as a draw bar, a bike rack, or a cargo carrier.
Trailer Hitch Installation - 2013 Ford F-150 - Curt
All right. Today on this 2013 Ford F150, we're going to install Part Number C14002 from Curt. All right. This is what the hitch looks like once installed on the vehicle. Next, we'll give you some measurements that'll help you out on selecting some accessories such as the ball mount, bicycle rack or a cargo carrier. From the top of receiver opening down to the ground will be about 20-1/4 inches.
Trailer Hitch Installation - 2013 Ford F-150 - Draw-Tite
Today on this 2013 Ford F150 were going to install part number 75691 from Draw-Tite. This is what the hitch looks once its installed on the vehicle. Next well go ahead and give you some measurements that will help you out in selecting some accessories such as a ball mount, a bicycle rack, and a cargo carrier. From the top of the receiver opening down to the ground will be 20-1/4 inches, from the center of the hitch pin hole to the edge of the bumper will be about 2-3/4 inches. First off well go ahead and remove the spare tire, it makes things a lot easier to see and install the hitch, although its not completely necessary. Now well go ahead and show you where the hitch installs on the vehicle.
Trailer Hitch Installation - 2002 Ford F-150 - Hidden Hitch
Today on a 2002 Ford F-15, were going to install part number 87183 for Hidden Hitch. This is what the hitch looks like once installed on the vehicle. Next well give you some measurements to help you out selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From top of the receiver opening down to the ground, will be 18 inches. From the center of the hitch pin hole to the edge of the bumper will be one and five eighths inches. Now well go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2002 Ford F-150 - Curt
Today, on this 2002 Ford F-150, were going to install part number c14355 from Curt. All right, this is what the hitch will look like once its installed on the vehicle. Next, well give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 18 1/2 inches and from the center of the hitch pin hole to the edge of the bumper will about 2 1/2 inches.Now, Ill go ahead and show you how the hitch is installed. The first thing were going to do is well go ahead and point out the location where the hitch will mount up. Itll use existing holes in the frame located at the bottom.
Today, on our 2002 Ford F-150, were going to install part number 87618 from Hidden Hitch. All right, this is what the hitch will look like once its installed on the vehicle. Next, well give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 18 1/2 inches and from the center of the hitch pin hole to the edge of the bumper will about 2 3/4 inches.Now, Ill go ahead and show you how the hitch is installed. Okay, the first thing were going to do is well go ahead and point out the attachment points on the frame. Youll use six holes on each side of the frame, two close to the bumper and one going up towards the front of the vehicle.All right, now well go ahead and install the hardware.
Trailer Hitch Installation - 2002 Ford F-150 - Draw-Tite
Today, on this 2002 Ford F-150, were going to install part number 75740 from Draw-Tite. All right, this is what the hitch looks like when its installed on the vehicle. Next, well give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 18 1/2 inches and from the center of the hitch pin hole to the edge of the bumper will about 2 3/4 inches.Now, Ill go ahead and show you how the hitch is installed. Okay, the first thing were going to do is well go ahead and point out the attachment points on the frame. Youll use six holes on each side of the frame, two close to the bumper and one going up towards the front of the vehicle.All right, now well go ahead and install our hardware.
Today, on our 2002 Ford F-150, were going to install part number 13355 from Curt. All right, this is what the hitch will look like once its installed on the vehicle. Next, well give you some measurements to help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 18 1/2 inches and from the center of the hitch pin hole to the edge of the bumper will about 2 1/2 inches.Now, Ill go ahead and show you how the hitch is installed. The first thing were going to do is go ahead and show the attachment points on the frame. There are three attachment points located at the bottom edge of the frame, two close to the bumper and one further up.
Trailer Hitch Installation - 1995 Ford F-150 - Hidden Hitch
Today on this 1995 Ford F-150, we're going to install part number 87471 from Hidden Hitch. All right, this is what the hitch looks like once installed on the vehicle. Next, we'll give you some measurements to help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 17-3/4 inches. From the center of the hitch pin hole to the edge of the bumper will be about 3-1/2 inches. Now, we'll go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2012 Ford F-150 - Hidden Hitch
Today on our 2012 Ford F-150, we're going to show you how to install Hidden Hitch, part number 87583. A quick note: You can lower the vehicle's spare tire to help make things easier, but we're not going to today. Next, we're going to show you the four attachment points that we're going to be using on the bumper brackets. We're going to show you everything on the driver's side and it's the exact same over on the passenger's side. We're going to use this lower bolt hole on the bumper bracket for our front facing attachment point on our hitch. The other attachment point is further up on the bracket.
Trailer Hitch Installation - 2012 Ford F-150 - Draw-Tite
Today on our 2012 Ford F-150, we're going to show you how to install Draw-Tite Hitch, part number 75691. A quick note: You can lower the vehicle's spare tire to help make thing easier, but we're not going to today. Next, we're going to show you the four attachment points that we're going to be using on the bumper brackets. We're going to show you everything on the driver's side and it's the exact same over on the passenger's side. We're going to use this lower bolt hole on the bumper bracket for our front facing attachment point on our hitch. The other attachment point is further up on the bracket.
Today on our 1990 Ford F150 were going to be installing Hidden Hitch part #: 87471. For this application were gone ahead and removed the spare tire. Now were ready to install the hitch. Its a good idea to get an extra set of hands to help you put the hitch in place. Well use a pair of clamps of vise grips to secure the hitch to the frame. Its got a total of six attachment points and each one of these will need to be drilled out before you can install your hardware.
Trailer Hitch Installation - 2010 Ford F-150
Today on this 2010 Ford F150, were gonna install part number 75691 from Draw-Tite. This also applies to part number 87583 from Hidden Hitch.This is what the hitch looks like when installed on the vehicle. Next, well give you some measurements thatll help you in selecting some accessories such as the ball mount, the bicycle rack or cargo carrier. From the center of the hitch pin to the edge of the bumper, youre looking 3 inches and from the top of the receiver opening down to the ground is gonna 17 inches. Now were gonna go ahead and show you how the hitch is installed. Now were gonna go ahead and show you how the hitch is installed.Next, were gonna go ahead and show you where the hitch mounts up onto the bumper bracket.
Today on this 2010 Ford F150, were gonna install part number 13368 from Kurt.This is how this hitch looks like when installed in a truck. Next, well give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the center of the receiver opening to the edge of the bumper its going to be 2 inches and from the top of the receiver opening down to the ground is going to be 18 inches. Now well go ahead and show you how the hitch is installed.Next were gonna show you how the hitch mounts up onto the bumper bracket. Its gonna mount using this oval hole right here and this larger round hole in the back. Looking at the passenger side, its gonna be identical on both sides of the frame.Alright, at this point we can go ahead and install the hitch.
Trailer Hitch Installation - 2012 Ford F-150 - Curt
Trailer Hitch Installation - 2006 Ford F-150
Today on this 2006 Ford F-150 were going to be installing Draw Tite Hitch part number 75506 and this installation will also apply to the Hidden Hitch part number 87418. Before we get started with our hitch installation we are going to show you a couple final install dimensions, which are going to help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 17-1/2 inches, and from the center of the pin hole to the clear the rear edge of the bumper is going to measure right at 3 inches, and now we will go ahead and move on to installation. Were up under the vehicle and the first thing I have done is go ahead and lower down the spare tire to give us some extra working room. Starting over here on the drivers side of the vehicle, the F-150 has a bumper reinforcement thats attached to the bumper and the frame.
Trailer Hitch Installation - 2011 Ford F-150
Today on this 2011 Ford F-150 we are going to be installing Curt hitch part number 13368. Before we get started with our installation, we are going to go ahead and show you a couple of the final install dimensions which will help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 21-1/2 inches. And from the center of the pin hole to clear the rear edge of the bumper is going to measure approximately 4 inches. And now we will go ahead and move on to our installation. 0:25
Trailer Hitch Installation - 2008 Ford F-150
Today on this 2008 Ford F-150 we are going to be installing Hidden Hitch part number 87418. This installation will also apply for Draw-Tite hitch part number 75506. We are underneath the vehicle and the first thing I have done is lowered down the spare tire to give us a little bit more working room. Looking underneath the vehicle we are going to point out the attaching points that we are going to be using. Starting at the center of the vehicle at the bottom of the bumper there is two existing tabs and we are going to be using those for the two center most attaching points for our trailer hitch. Then looking over at the driver side of the vehicle the saddle bracket has two holes in it that we are going to be using to attach the hitch. The first one is at the rear most section and then if you move to the inboard side you can see there is a second hole that we will be using there and that is going to be the same on the passenger side of the vehicle as well. 00:44
Trailer Hitch Installation - 1996 Ford F150
Install part number V82460 from Valley we will install this 2 inch receiver hitch on a 1996 Ford F150 pickup truck. First thing what you want to do is installing the hitch on this vehicle is you want to go ahead and lower the spare tire down. As you can see we already have that down and out of the way. Next we will show you where the hitch mounts up on the frame. The hitch will mount to the bottom of the frame rail but there are no existing holes so we will have to drill out all the holes on this hitch. It will be identical on both sides. :26
