Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Ford. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Ford on the road.
What our customers are saying:
I received great customer service who was patient with my questions. The hitch was shipped quickly. Doing the install of electrical and the hitch took 60 minutes including cleanup on my 07 Highlander. Do some homework first and it makes the whole process easier.
David
Roseboro, NC
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
Hitch Accessories
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 2013 Ford Escape - Curt
Today on our 2013 Ford Escape well be installing the Curt hitch, part number c13129. This is what our hitch will look like once its installed. Next, well go ahead and give you a couple of measurements to assist selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 5 inches. From the top of the receiver tube opening to the ground is 13 inches. This will assist you with selecting accessories such as a ball mount, bike rack, or cargo carrier.
Trailer Hitch Installation - 2010 Ford Escape - Hidden Hitch
Alright today, in this 2010 Ford Escape, were going to install part number 87626 from Hidden Hitch. This is what the hitch looks like when its installed on a vehicle. Next, well give you some measurements to help you out in selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be around 17 inches. From the center of the hitch pen hole to the edge of the bumper will be around one inch. Now, well go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2010 Ford Escape - Draw-Tite
All right, today is 2010 Ford Escape. We're going to install part number 36501 from Draw-Tite. All right, this is what the hitch looks like once installed on a vehicle. Next, we'll give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From top of receiver opening down to the ground, will be about 17 1/2 inches. From the center of the hitch pin hole to edge of bumper will be around 1 inch.
Trailer Hitch Installation - 2002 Ford Escape - Hidden Hitch
Today on our 2002 Ford Escape, we'll be installing Hidden Hitch, part number 70636. This is what our hitch will look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is five and a half inches. From the top of the inside of the receiver tube opening to the ground is 14 inches. This will assist you with selecting accessories such as a ball mount, bike rack, or cargo carrier.
Trailer Hitch Installation - 2002 Ford Escape - Draw-Tite
Today on our 2002 Ford Escape, well be installing a Draw Tite Hitch, part number 75118. This is what our hitch will look like once it is installed. Next well go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 5 inches. From the top of the inside of the receiver tube opening to the ground is 14 inches. This will assist you with selecting accessories such as a ball mount, bike rack or cargo carrier. Now well go ahead with the installation.
Trailer Hitch Installation - 2009 Ford Escape - Hidden Hitch
Today on this 2009 Ford Escape were going to install part number 87626 from Hidden Hitch. All right, this is what the hitch looks like when its installed on the vehicle. Next, well give you some measurements to help you out when selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 17 inches, and from the center of the hitch pin hole to the edge of the bumper will be about 1 inches. All right, now well go ahead and show you how this hitch is installed. First thing well do is go ahead and show the attachment points on the frame.
Trailer Hitch Installation - 2009 Ford Escape - Curt
All right, today on this 2009 Ford Escape, were going to install part number 13650 from Curt. This is what the hitch looks like when its installed on the vehicle. Next well give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 17 inches and from the center of the hitch pinhole to the edge of the bumper will be about 1 inches. Now Ill go ahead and show you how the hitch is installed. First thing were going to do is go ahead and show you how the hardware attaches to the vehicle and the hitch. From the inside of the frame the carriage bolt and the block we ran together through the frame and then through the hitch.
Trailer Hitch Installation - 2013 Ford Escape - Hidden Hitch
Today on our 2013 Ford Escape we'll be installing Hidden Hitch, part number 87627. This is what our hitch will look like once it's installed. Next we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 5 inches. From the top of the inside of the receiver tube opening to the ground is 14 inches. This will assist you when selecting accessories such as a ball mount, a bike rack, or a cargo carrier.
Today on our 2013 Ford Escape, well be installing the CURT Hitch, part number C13131. This is what tour hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is four and three quarter inches. From the top of the inside opening of the receiver tube to the ground is 13 and three quarter inches. This will assist you with selecting accessories such as a ball mount, bike rack or cargo carrier.
Today on our 2013 Ford Escape, well be installing the Hidden Hitch, part number 90093. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is three and three quarter inches. From the top of the inside of the receiver tube opening to the ground is 13 and three quarter inches. This will assist you selecting accessories such as a bike rack or cargo carrier.
Today on our 2013 Ford Escape, well be installing Hidden Hitch, part number 87622. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is five inches. From the top of the inside of the receiver tube opening to the ground is 13 and three quarter inches. This will assist you selecting accessories such as a ball mount, bike rack or cargo carrier.
Trailer Hitch Installation - 2013 Ford Escape - Draw-Tite
Today on our 2013 Ford Escape well be installing the Draw Tite hitch, part number 75758. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is five inches. From the top of the inside of the receiver tube opening to the ground is 14 inches. This will assist you with selecting accessories such as a ball mount, a bike rack or a cargo carrier.
Today on our 2013 Ford Escape well be installing the Draw Tite hitch, part number 75746. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is five inches. From the top of the inside of the receiver tube opening to the ground is 13 inches. This will assist you with selecting accessories such as a ball mount, a bike rack or a cargo carrier.
Today on our 2013 Ford Escape well be installing the Draw Tite hitch, part number 36518. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is three and three-quarter inches. From the top of the inside of the receiver tube opening to the ground is 13 inches. This will assist you with selecting accessories such as a bike rack or a cargo carrier.
Today on our 2013 Ford Escape, we'll be installing the Draw-Tite Hitch, Part number 36524. This is what our hitch to look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 3-1/2 inches. From the top of the inside of the receiver tube opening to the ground is 12-1/2 inches, which will assist you in selecting accessories such as a bike rack or a cargo carrier. Now, let's go ahead with the installation.
Today on our 2013 Ford Escape well be installing the Hidden Hitch, part number 90219. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is three and a half inches. From the top of the inside of the receiver tube opening to the ground is 12 inches, which will assist you in selecting accessories such as a bike rack or a cargo carrier. Now lets go ahead with installation.
Trailer Hitch Installation - 2007 Ford Escape - Curt
Today on this 2007 Ford Escape, were going to do install part number 13650 from Curt. This is what the hitch looks like when its installed on the vehicle. Next well give you some measurements thatll help you out when selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 17 inches. From center of the hitch pin hole to the edge of the bumper will one and a quarter inches. Now Ill go ahead and show you how the hitch is installed. First well point out the mounting locations for our hitch, which will be here and theyre identical on both sides of the vehicle.
Today on this 2007 Ford Escape, were going to install part number 12060 from Curt. This is what the hitch looks like once installed on the vehicle. Next well give you some measurements thatll help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From top of the receiver opening down to the ground will be 17 inches. From center of the hitch pin hole to the edge of the bumper will be one and a quarter inches. Now Ill go ahead and show you how the hitch is installed. First Ill point out the mounting locations for our hitch, which will be here and theyre identical on both sides of the vehicle. Our first step is to go ahead and install the hardware in the frame.
Trailer Hitch Installation - 2011 Ford Escape - Curt
Today on this 2011 Ford Escape were going to install part number 12060 from Curt. Now this is what the hitch looks like when its installed on a vehicle. Next well give you some measurements thatll help you out when selecting some accessories such as a bike rack or a cargo carrier. From the top of the receiver opening down to the ground will be 16 1/4 inches. From the center of the hitch pin hole to the edge of the bumper will be about 1 inches. Now well go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2011 Ford Escape - Hidden Hitch
Today on this 2011 Ford Escape were going to install part number 90108 from Hidden Hitch. This is what the hitch looks like when its installed on vehicle. Next well go ahead and give you some measurements to help you out in selecting some accessories, such as a bike rack or a cargo carrier. From the top of the receiver opening down to the ground will be 17 inches, and from the center of the hitch pin hole to the edge of the bumper will be one inch. Now Ill go ahead and show you how the hitch is installed. The first thing were going to do is go ahead and install our hardware into the frame of the vehicle.
