Brake Controller for Dodge
Brake controllers with a custom fit wiring harness for your Dodge make trailer towing safer and installation easier. We offer high quality controllers in both time-delay and proportional models, from manufacturers such as Tekonsha, Hopkins, Valley, and Draw-Tite. Brake controller wiring adapters are available for most Dodge vehicles, allowing for simple plug-and-play installation.
What our customers are saying:
The fast response and delivery of my brake controller order could not have been better including a confirming email. The item arrived well packaged and in good order. This is very good service.
Gerald
Roland, IA
Trailer Brake Controller Installation - 2010 Dodge Nitro
Today on this 2010 Dodge Nitro we are going to install brake controller part number 90885 from Tekonsha. This is their Prodigy P2 brake controller. And to install this, we are going to use part number ETBC7. The first thing we need to do is go ahead and take the bracket from the ETBC7 kit. We are going to install that on to the bracket that is on the hitch. The next step is to go ahead and do some partial assembly on the 7-pole itself. What we will do is we will go ahead and add the gray cable that comes with the kit and we will hook it up to our 7-pole connector. What we are going to do is actually just wind this up in electric tape and leave our leads out that we need. We are going to leave our 4-pole sticking out and we are going to need our brake wire which is going to be blue and out black wire for 12 volt power supply. And then we will just wrap up our purple and white wires. Our white wire is going to go directly to the frame for ground. And then the purple wire is going to be for reverse lights if it is ever needed. And to our black and blue wires we are going to install the grey cable that has the black and white wires inside of it. What we are going to do is just peel away the grey sheath. Then stripe our wires back and make our connections: black to black and white to blue. Cover those up with some electric tape. Next we will go ahead and install the loom along the wires like this. 1:20
