View Cart



Dodge Durango Trailer Hitch

change vehicle

Select Dodge Durango Year

Trailer Hitch

Custom fit Trailer Hitch for your:



Available Years for Trailer Hitch



Trailer Hitches for Dodge Durango

Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Torklift to fit your Dodge Durango. Choose the hitch that is right for your towing needs and your budget.

All hitches come with a limited lifetime warranty and are manufactured in the USA.

We offer over a custom hitch for virtually every Dodge Durango on the road.




What our customers are saying:

Thanks for your promt responce. I received my hitch and installed it with ease thanks to the instructions provided. Not only did they have my hard to find hitch they sold it to me for nearly half the price of the other guys. All my future towing purchases will be done through Etrailer. Thanks Tony

Tony

Spokane, WA






Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers






Dodge Durango Trailer Hitch Videos

Best 2010 Dodge Durango Hitch Options

Today we're going to be taking a look at the best hitches available for our 2010 Dodge Durango. Here on the top we've got our hidden hitch class 3, this is part number 87608. Just below it's the Curt class 3, that part number is C13182, and then here on the bottom we've got the hidden hitches twin, the draw type part number 75713. Now a slight cosmetic difference that we're going to notice in the Curt, is that here just behind the receiver tube, the round tube is straight, whereas with both the hidden hitch, and with the draw type, it's got an angle that's going to continue from the bracket, all the way up to the receiver. Now a few of the other differences we'll notice about our hidden hitch, or our draw type, which again are the same hitch versus our Curt, is that they're going to have a bracket that's been welded on here, that allows for pretty easy wiring connection. There's going to be three pre-drilled holes in that bracket to allow us to mount any kind of wiring that we'd want right up to it. Another thing that I noticed different, the size of our safety chain connection loops are quite a bit bigger on the hidden hitch and the draw type, versus the Curt.



Best 2015 Dodge Durango Hitch Options

Today we're going to be taking a look at the best hitches available for our 2015 Dodge Durango. Here on the top we've got our Hidden Hitch Class Three. This is Part Number 87608. Just below it's the Curt Class Three. That part number is C13182 and then here on the bottom we've got the Hidden Hitch's, the draw tight, Part Number 75713. Now a slight cosmetic difference that we're going to notice in the Curt is that here just behind the receiver tube, the round tube is straight whereas with both the hidden hitch and the draw tight, it's got an angle that's going to continue from the bracket all the way up to the receiver.



Best 2014 Dodge Durango Hitch Options

Today we're going to be taking a look at the best hitches available for our 2014 Dodge Durango. Here on the top we've got our Hidden Hitch Class III, this is part number 87608. Just below it's the CURT Class III, that part number is C 13182. And then here on the bottom we've got the Hidden Hitch's twin, the Draw-Tite, part number 75713. Now a slight cosmetic difference that we're going to notice in the CURT is that here, just behind the receiver tube, the round tube is straight. Whereas with both the hidden hitch and with the Draw-Tite, where it's got an angle that's going to continue from the bracket, all the way up to the receiver. Now a few of the other differences we'll notice about our Hidden Hitch or our Draw-Tite, which are the same hitch versus our CURT, is that they're going to have a bracket that's been welded on here that allows for pretty easy wiring connection. There's going to be three, pre-drilled holes in that bracket to allow us to mount any kind of wiring that we want right up to it.



Best 2013 Dodge Durango Hitch Options

Today we're going to be taking a look at the best hitches available for our 2013 Dodge Durango. Here on the top we've got our Hidden Hitch Class III, this is part #87608. Just below it's the Curt Class III, that part #C13182. Here on the bottom, we've got the Hidden Hitch's twin, the Draw-Tite, part #75713. The slight cosmetic difference that we're going to notice in the Curt is that here, just behind the receiver tube, the round tube is straight, whereas with both the Hidden Hitch and with the Draw-Tite, it's got an angle that's going to continue from the bracket all the way up to the receiver. A few of the other differences we'll notice about our Hidden Hitch or our Draw-Tite which are again the same hitch versus our Curt, is that they're going to have a bracket that's been welded on here that allows for pretty easy wiring connection.





Best 2011 Dodge Durango Hitch Options

Today we are going to be taking a look at the best hitches available for our 2011 Dodge Durango. Here on the top we've got our hidden hitch, class three. This is part number 87608. Just below it is the curt, class three. That part number is C13182 and then here on the bottom we've got the hidden hitch's twin, the draw-tite, part number 75713. A slight cosmetic difference that we're going to notice in the curt, is that here just behind the receiver tube, the round tube is straight, whereas with both the hidden hitch and with the draw-tite, where it's got an angle that's going to continue from the bracket all the way up to the receiver. A few of the other differences we'll notice about our hidden hitch or our draw-tite, which are again are the same hitch versus our curt, is that they're going to have a bracket that's been welded on here that allows for pretty easy wiring connection. There's going to be three pre-drilled holes in that bracket to allow us to mount any kind of wiring that we'd want right up to it. Another thing I notice different, the size of our safety chain connection loops are quite a bit bigger on the hidden hitch or the draw-tite versus the curt.



Trailer Hitch Installation - 2015 Dodge Durango - Curt

Today, on our 2015 Dodge Durango, we're going to take a look at and show you how to install the Curt custom fit class III trailer hitch receiver. This offers a 2 inch opening. Part number is C13182. Here's what our hitch is going to look like when it's installed. You can see it's a little tidier than some of the others. It tucks up a little closer underneath the bumper, little less of a gap here. Still really nice looking hitch, pretty compact.



Trailer Hitch Installation - 2015 Dodge Durango - Hidden Hitch

Today on our 2015 Dodge Durango we're going to take a look at then show you how to install the Hidden Hitch Custom Fit Class III Trailer Hitch Receiver. This offers a two inch opening, its part number is 87608. Here's what the hitch looks like when installed. As you can see it goes right below the bumper here as opposed to some of that would sit up a little bit higher behind our cover. Got nice safety chain connection points on each side we should be able to get just about any kind of safety chain connected. This is going to give us a good very good tow rating. We've got a six hundred pound ton weight capacity. That's the maximum amount of force we can put downward here.



Trailer Hitch Installation - 2008 Dodge Durango - Draw-Tite

Today on our 2008 Dodge Durango we'll be reviewing and installing the Draw-Tite Max-Frame class three 2" receiver tube hitch, part number 75162. Here's what our hitch is going to look like once it's installed. Our hitch is a really nice compact design, full steel welded construction. It's got a nice black powder-coated finish. The only thing we really have hanging down here is our chain hold downs on each side, the two pre-drilled holes that are in our receiver tube, the 5/8 pinhole, and the 1/2" pre-drilled lock holes. Hitch itself is a class three 2" by 2" receiver tube hitch that is capable of up to 600 pounds of tongue weight and a 6,000 pound tow capacity. Next we'll go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch.



Trailer Hitch Installation - 2008 Dodge Durango - Hidden Hitch

Today on our 2008 Dodge Durango we're going to review and install Hidden Hitch class three 2" receiver tube hitch, part number 87562. Here's what our hitch is going to look like once it's installed. Our hitch is a really nice compact design, full steel welded construction. It's got a nice black powder-coated finish. The only thing we really have hanging down here is our chain hold downs on each side, the two pre-drilled holes that are in our receiver tube, the 5/8 pinhole, and the 1/2" pre-drilled lock holes. Hitch itself is a class three 2" by 2" receiver tube hitch that is capable of up to 600 pounds of tongue weight and a 6,000 pound tow capacity. Next we'll go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch.



Trailer Hitch Installation - 2013 Dodge Durango - Hidden Hitch

Today on our 2013 Dodge Duragno, we are going to install the hidden hitch trailer hitch receiver part number 87608. Now here is what our hitch looks like installed in our vehicle. Now we'll go ahead and give you a couple of measurements in helping you choose some accessories for your hitch such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is approximately 2 1/2 inches. From the top of the opening in the receiver to the ground is approximately 14 1/4 inches. Now let's go ahead and install our hitch. Now to begin our installation, we are going to need to first raise the rear hatch of the vehicle and we are going to need to lower down the spare tire.





Trailer Hitch Installation - 2014 Dodge Durango - Curt

Today on our 2014 Dodge Durango we'll be installing the CURT Hitch, part number C13182. This is what our hitch will look like once it is installed. Next we'll give you a couple of measurements to assist your selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 4-1/4 inches. From the top of the receiver tube opening to the ground is 11-3/4 inches. This will assist your selecting accessories such as a ball mount, bike rack or cargo carrier. Now we'll go ahead with the installation. We'll first go ahead and lower and remove the spare tire.



Trailer Hitch Installation - 2014 Dodge Durango - Hidden Hitch

Today in our 2014 Dodge Durango, we'll be installing hidden hitch two inch receiver inaudible 00:00:05 part number 87608. This is what our hitch should look like once installed. Next, we're going to give you a couple measurements to assist you selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is two and a half inches. From the top of the receiver tube opening to the ground is twelve inches. This will assist your selecting accessories such as a ball mount, bike rack, or cargo carrier. Now we'll go ahead with the installation.



Trailer Hitch Installation - 2008 Dodge Durango

Today on our 2008 Dodge Durango, we'll be test fitting Curt hitch, part number 13072. Now before we begin our installation, here are a few measurements to help you in selecting accessories, such as a draw bar, a bike rack, or a cargo carrier. From the center of the hitch pin hole to the outermost part of the bumper looks about even, and from the top of the receiver tube to the ground measures 21". Now lets go ahead with our install. Now to begin our installation, we'll need to remove the spare tire from the vehicle. Once we've done that, we'll now place our hitch into position here on the rear bumper.



Trailer Hitch Installation - 2008 Dodge Durango - Curt

Today on our 2008 Dodge Durango, well be installing Curt Hitch part number 13296. Now, before we begin our installation here are a few measurements to help you when selecting accessories such as a draw bar, a bike rack or a cargo carrier. From the center of the hitch pin hole to outer most part of the bumper looks about even and from the top of the receiver tube to the ground measures 21 inches.Now, lets go ahead with our install. To begin our installation well go ahead and remove the spare tire from the vehicle. With our spare tire out of the way, underneath the vehicle here we will point out our attachment points. On the driver side we will be using these two bolts here which are connected together as well as this bolt here forward of those two.



Trailer Hitch Installation - 2012 Dodge Durango - Curt

Today on our 2012 Dodge Durango well be installing the Curt hitch part #: C13182. This is what our hitch will look like once its installed. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 4 and a quarter inches. From the top of the inside of the receiver tube opening to the ground is 14 and three quarter inches. This will assist you with selecting accessories such as a ball mount, a bike rack or a cargo carrier.



Trailer Hitch Installation - 2007 Dodge Durango - Curt

Today on our 2007 Dodge Durango, well be installing Curt Hitch, part number 13072. Now before we being our install, heres what your hitch will look like on the vehicle. Well now go ahead and give you a few measurements to help you when selecting accessories, such as a draw bar, a bike rack or a cargo carrier. Now the center of the hitch pin hole is even with the outermost part of our bumper. From the top of the receiver tube to the ground is 21 inches. Now lets go ahead with our install. Now weve already gone ahead and lowered our spare tire, which is the first step of installing this hitch.



Trailer Hitch Installation - 2006 Dodge Durango - Curt

Today on our 2006 Dodge Durango well be installing the Curt hitch, part number 13072. This is what our hitch will look like once its installed. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch such as a draw bar, a bike rack, or a cargo carrier. The center of the hitch pin hole is even with the outer most edge of the bumper and from the top of the receiver tube to the ground is 21 inches. Now lets go ahead with the installation. Note first before we can begin installing the hitch well need to go ahead and lower and remove the spare tire which weve already done.



Trailer Hitch Installation - 2003 Dodge Durango

Today on this 2003 Dodge Durango we are going to be installing Hidden Hitch part number 87522, and this installation will also apply to Draw-Tite Hitch part number 757081. Before we get started with our installation we are going to give you a couple of final install dimensions which will help make choosing your hitch accessories a little bit easier. From the top of the receiver opening to the ground is going to measure 18 inches, and from the center of the pin hole to clear the rear edge of the bumper is going to measure approximately 3 inches, and now we'll go ahead and move on to the installation. We'll get up underneath the vehicle and the first thing that we've done is lower the spare tire down just a little bit. Just enough where if you need to manipulate the hitch around it you can.





Dodge Durango Trailer Hitch Questions and Answers


  • Towing Capacities for a 2015 Dodge Durango V6
  • I checked the owners manual of your 2015 Dodge Durango V6 and the towing capacities depend on the transmission style. For light duty RWD models and AWD light duty models the capacity is 3,500 lbs trailer 350 lbs tongue weight. For standard RWD and AWD models the capacity is 6,200 lbs with 620 lbs tongue weight. For a hitch for your vehicle you would want the Curt Class III part # C13182 that has been confirmed as a fit and has more towing capacity than the vehicle would. This means...
    view full answer...

  • Trailer Hitch Recommendation for a 2015 Dodge Durango Citadel
  • The Curt Hitch part # C13182 that you referenced has been confirmed as a fit for your 2015 Dodge Durango Citadel. But if you check out the picture I attached you will see that it does hang below the rear fascia of the vehicle when installed. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
    view full answer...

  • Trailer Hitch and Wiring for a 2015 Dodge Durango
  • The issue that one customer had with the receiver/cross tube on hitch # C13182 making contact with the fascia seems to be an anomaly. The vast majority of reviewers did not have this issue so there could have been something different about that one Durango or maybe something slightly off with the particular hitch he received. On a 2015 Dodge Durango the hitch should fit up nicely close to the rear fascia like on the 2014 in the video I have linked. I know you mentioned using the...
    view full answer...

  • Trailer Hitch and Wiring Installation for 2015 Dodge Durango Limited
  • A vehicle lift certainly makes installation of a trailer hitch easier but it is still possible to bolt on a hitch without one. Having more height under the vehicle will make it easier for you to maneuver the hitch as well as your arms and tools but plenty of folks install their hitch without benefit of a lift. A pair of vehicle ramps, which are not terribly expensive and readily available, might be a nice compromise to make your install go a bit better. You can also drive a rear wheel...
    view full answer...

  • Kuat Sherpa Bike Rack Compatibility with 2-Inch Hitch on 2015 Dodge Durango
  • The Kuat Sherpa 2-Bike Platform hitch racks, part # S101 in grey and part # S103 in black and chrome will work with any hitch made for your Durango. For the 2015 Dodge Durango 2-inch Class III hitches are offered. Even if a smaller 1-1/4-inch Class II hitch were available I would still recommend the 2-inch size for its greater weight-handling capacity and broader compatibility with accessories such as bike racks and cargo carriers. If you have a full-size spare tire use hitch # 87608...
    view full answer...

  • Recommended Brake Controller And Trailer Wiring Harness For 2015 Dodge Durango
  • The trailer hitch I recommend for your 2015 Durango is the Hidden Hitch Trailer Hitch Receiver, part # 87608. This is a Class lll hitch and it has a 2 inch receiver opening. I have attached a link to an installation video for this hitch you can check out. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a...
    view full answer...

  • 2015 Dodge Durango R\T Trailer Hitch Recommendation
  • The Curt Hitch part # C13182 that you referenced has been confirmed as a fit for all models of the 2015 Dodge Durango so it would work well on your R/T model. It will fit with your factory spare as well. It is recommended that you lower it temporarily to install the hitch though. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop....
    view full answer...

  • Trailer Hitch Recommendation for a 2015 Dodge Durango
  • The Hidden Hitch that has been confirmed as a fit for your 2015 Dodge Durango would be the part # 87608. I attached an install video that shows it being installed on a similar 2014 Durango. The process would be the same. Typically a tow package for a vehicle includes a trailer hitch, trailer wiring, and sometimes a larger transmission cooler. Since your vehicle is pretty new you can check the original window sticker to see if the tow package was on your vehicle. Or you can call a Dodge...
    view full answer...

  • Trailer Hitch Installation and Wiring Recommendation for a 2015 Dodge Durango
  • You might need to remove the rear bumper cover on a 2015 Dodge Durango to install Curt trailer hitch # C13182 and you might not. If it gets in the way you can remove it. The 2 screws on the bottom are really screws, they are more like latches. You can use a small coin to turn them if the hitch is in the way. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
    view full answer...

  • Trailer Hitch and Wiring Recommendation for a 2015 Dodge Durango
  • For your 2015 Dodge Durango you would want the Hidden Hitch part # 87608 as it has been confirmed as a fit and would work well with cargo carriers and bike racks. This is a 2 inch hitch with plenty of capacity. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
    view full answer...

  • Trailer Hitch and Wiring for a 2015 Dodge Durango Limited with Dual Exhaust and Full Size Spare Tire
  • The problem isn't the dual exhaust on a 2015 Dodge Durango but the size of the spare tire. If the spare is the same size as the other 4 tires on the vehicle then it will be too large for hitch # C13182 to fit and the spare would have to be stored elsewhere. If it is the smaller spare, as shown in the video I have linked, then it will not be a problem. Draw-Tite hitch # 75713 has a bit of a different design and will allow a full size spare to stay in place under the vehicle. If you...
    view full answer...

  • Least Visible Hitch Recommendation for a 2014 Dodge Durango
  • In my opinion the Curt Hitch part # C13182 would be less visible than the Hidden Hitch part # 87608. If you look at the picture I attached you will see that the Hidden Hitch has a more of the cross tube visible as well as the mounting brackets. The Curt only has the curved cross tube that comes down and is visible. For trailer wiring you would want the Curt Harness part # C56198. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls,...
    view full answer...

  • Size of Bolts Used to Install Curt Class III Trailer Hitch # C13182 on 2014 Dodge Durango
  • To install the Curt # C13182 on your 2014 Durango, you'd use the existing M14 bolts located on the inside of the frame members at the rear of the vehicle, as shown in the installation video I've linked you to. You'd need a 21mm socket to remove and install the bolts, and they'd be torqued according to the instructions, which I've also linked you to. You might also need the following to complete your towing system: Balllmount, part # 2923 Trailer ball, part # 63845 for a 2 inch, or...
    view full answer...

  • Will Curt Trailer Hitch Fit a 2014 Dodge Durango with Rallye Package
  • The Curt trailer hitch # C13182 is listed as a fit for all models of the 2014 Dodge Durango so your Durango with the Rallye Package should not be a problem. I have linked the instructions and a video showing a typical isntallation for you. If you plan on doing some towing I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For trailer wiring use # C56198. This style harness plugs in line with the vehicle tail...
    view full answer...

  • Compatibility of Curt Class III Trailer Hitch # C13182 w/ 2014 Dodge Durango R/T
  • According to my contact in the Engineering/Tech Support department at Curt, the # C13182 Class III hitch is a fit for the 2014 Dodge Durango R/T. There is no trimming of the bumper or fascia needed, but you might need to scrape away a bit of excess caulk from the frame rails if it interferes with getting the hitch in place. I've linked you to the installation instructions as well as to an install video you might find helpful. If you plan on towing a simple trailer equipped with a 4-pole...
    view full answer...

  • Trailer Wiring Harness for a 2014 Dodge Durango and Curt Class III Trailer Hitch
  • The Curt trailer hitch # C13182 does fit your 2014 Dodge Durango. I have linked the isntructions and a video showing an installation on a 2012 model. Installation will be nearly identical on your 2014. For a plug-in trailer wiring harness for your 2014 Durango you can use # C56198. This harness does plug in line with the vehicle tail lights but also requires a connection to the vehicle battery. This connection powers the trailer lights and adds another level of circuit protection between...
    view full answer...

  • Hitch for a 2014 Dodge Durango That Utilizes the Cut-Out Panel on the Bumper
  • The hitches that we offer for the 2014 Dodge Durango, like the Hidden Hitch, # 87608, all mount below the bumper/fascia. An OEM hitch would utilize the cut-out panel on your Durango.
    view full answer...

  • Hitch Recommendation for a 2014 Dodge Durango R/T
  • Yes, the Curt Hitc part # C13182 that you referenced has been confirmed to fit all models of the 2014 Dodge Durango so it will work well on your R/T model. I checked the install instructions and there are no extra steps to take in order to fit this hitch on a vehicle with dual exhaust.
    view full answer...

  • Is a Stabilization Strap Needed with Trailer Hitch 13182 On a 2014 Dodge Durango and a Cargo Carrier
  • When using Curt trailer hitch # C13182 on your 2014 Dodge Durango you will not have to use a stabilization strap for a cargo carrier. I have included a link to the installation instructions and a link showing installation of this hitch for you. The hitch is rated for 500 pounds tongue weight for use with a cargo carrier. The weight of the carrier you use will count towards the tongue weight total. Please check the vehicle owners manual for the vehicle tongue weight capacity. Which ever...
    view full answer...

  • Hitch and Trailer Wiring Recommendation for a 2014 Dodge Durango
  • For a hitch for your 2014 Dodge Durango you would want the Curt Class III hitch part # C13182. This hitch will be largely out of plain sight on your vehicle when installed and would do a great job for towing. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip,...
    view full answer...

  • What Will the Hidden Hitch # 87608 look like Installed on a 2013 Dodge Durango
  • I attached a customer submitted picture of the Hidden Hitch Trailer Hitch Receiver # 87608 installed a similar Dodge Durango as your 2013 model. I also attached a video of a very similar hitch being installed on a 2013 Dodge Durango for you to check out. The hitch is a Curt Hitch # C13182. This hitch and the # 87608 are very similar in appearance and the video will give you a good idea of how either hitch would look installed on your vehicle.
    view full answer...

  • Trailer Hitch and Wiring Recommendation for a 2013 Dodge Durango
  • The recommended wiring kit to go along with the Draw-Tite Max-Frame Trailer Hitch # 75713 for your 2013 Dodge Durango would be the Curt Trailer Wiring Harness Part # C56133. Installation would be pretty easy actually, it would be just a matter of removing the taillight assemblies and then plugging the connectors of the # C56133 inline with the taillight harnesses. Check out the installation instructions I attached for this product for more details. For a ball mount, hitch ball, and...
    view full answer...

  • Trailer Hitch Recommendation for a 2013 Dodge Durango R/T
  • The 2-inch Class III hitches we have for your 2013 Dodge Durango R/T are shown on the linked page. I recommend the Draw Tite # 75713 for its no-drilling installation and since it allows you to keep a full size spare stowed underneath the truck. The hitch will install under your bumper as shown in the linked video. You will not need to cut the bumper. Existing fasteners on the vehicle will be used for hitch installation. For a wiring harness you can use # 118552 and refer to the...
    view full answer...

  • Best Hitch Recommendation for a 2015 Jeep Compass
  • The Curt Hitch part # C13081 that you referenced has been confirmed to fit your 2015 Jeep Compass so it would work well for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop...
    view full answer...

  • Is Bumper Modification Required to Install Hidden Hitch 87608 on 2013 Dodge Durango R/T
  • The hitch will install under your bumper as shown in the linked video. You will not need to cut the bumper. Existing fasteners on the vehicle will be used for hitch installation. The 2-inch Class III hitches we have for your 2013 Dodge Durango R/T are shown on the linked page. I recommend the Hidden Hitch # 87608 for its no-drilling installation and since it allows you to keep a full size spare stowed underneath the truck. For a wiring harness you can use # 118552 and refer to the...
    view full answer...

  • Does the Curt Hitch for the 2012 Dodge Durango Hang Underneath the Bumper
  • I attached a picture of the Curt Hitch # C13182 installed on a similar 2012 Dodge Durango as yours. You will notice that this hitch hangs below the bumper and does not require any fascia trimming. The factory hitch comes through the rear bumper like you are aware of, whereas this one is below the bumper. I attached installation instructions for this product for you to check out also. To complete your towing setup you may be interested in the following products: etrailer Ball Mounts...
    view full answer...

  • Trailer Hitch that Fits a 2012 Dodge Durango R/T with a 20 Inch Spare Tire
  • Hidden Hitch trailer hitch # 87608 is compatible with the 18 inch full size spare but a 20 inch may be too large; however the R/T is not excluded from the hitch fit list. If you look at the instructions which I have linked for you, the hitch fits on the outside of the spare cavity, so left to right it should not be an issue, even with a 20 inch spare. However, front to back could be the issue and you may have to relocate the hanger for the spare if possible or it could be difficult to get...
    view full answer...

  • What Vehicles does the Draw Tite Hitch part # 75102 Fit
  • The Draw Tite hitch part # 75102 that you referenced is designed to fit the following vehicles: 1999 - 2002 Nissan Quest 1999 - 2002 Mercury Villager
    view full answer...

  • Is Bumper or Fascia Trimming Required for Hidden Hitch # 87608 Installation on a 2011 Dodge Durango
  • No, the installation instructions, see link, for the Hidden Hitch Trailer Hitch, # 87608, indicate that no trimming is needed for installation of the hitch on the 2011 Dodge Durango. There is a note that states that there may be some excess body sealer, caulk, that may need to be trimmed so the hitch will sit flush under the vehicle. Some items you may need to complete your towing setup are listed below. etrailer.com Ball Mount Kit, # 989899 Trailer Wiring Harness, # 118552
    view full answer...

  • Availability of a Trailer Hitch that Will Fit a 2011 Dodge Durango with an 18 Inch Spare Tire
  • I spoke with my contact at Draw-Tite and Hidden Hitch. He stated that the Hidden Hitch # 87608, and the Draw-Tite, # 75713 will both fit with the full size spare (18 inch spare. If you look at the instructions that I have linked for you, you will see that the hitch fits around the spare tire well under the vehicle. If you plan on doing some towing, I recommend the etrailer ball mount kit, # 989900, which comes with 2 ball mounts, 2 balls, a hitch pin and clip, and a carrying bag. For...
    view full answer...

  • Is Any Bumper Trimming Required to Install a Draw-Tite Trailer Hitch on a 2011 Dodge Durango
  • You will not have to do any fascia trimming to install Draw-Tite Trailer Hitch # 75713 on your 2011 Dodge Durango. I have included a link to the installation instructions for you to view. f you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clips, and a carrying bag. For trailer wiring, use # 118552. I have included instruction links for the wiring as well.
    view full answer...

  • How to Store a 4-Way Harness Out of Plain Sight
  • What you could use to keep the 4-way trailer connector you have installed on your 2011 Dodge Durango is use the 4-way Bracket part # HM48595. This will attach to the lower fascia of your vehicle and will allow the connector to be as out of sight as you like based on where you install it.
    view full answer...

  • Will Draw-Tite Hitch part # 75162 Fit My 2009 Dodge Durango and What Wiring is Recommended
  • Draw-Tite hitch, part # 75162 will fit your 2009 Dodge Durango. All of our hitches include all the nuts and bolts and other hardware needed to install. However, you could use Curt Hitch, part # 13296. This hitch will be much easier to install, almost half the time, and you will not have to drill any holes, but you can see a bit more of the hitch since it has the cross tube. I will include links to an install video of the first hitch, and the instruction sheet for the Curt hitch. If minimizing...
    view full answer...

  • Trailer Hitch and Wiring for a 2007 to 2009 Chrysler Aspen or 2004 to 2009 Dodge Durango
  • Trailer hitches and wiring are sold separately because many people want or need to buy just one or the other and would not want to pay extra for parts they won't need. Hidden Hitch trailer hitch # 87562 is designed to fit on 2007 to 2009 Chrysler Aspens and 2004 to 2009 Dodge Durangos. For a trailer wiring harness that fits these same vehicles I recommend # 118390. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend...
    view full answer...

  • Recommended Hitch and Towing Equipment for 2008 Dodge Durango
  • For your 2008 Durango, I'd recommend going with the Curt Class III hitch, part # 13072. The Reese 37042 is an obsolete multi-fit hitch that isn't a fit for your Durango, according to Reese. If you're planning on using the hitch for towing purposes, you'd also need the following to complete your towing system: 4-pole trailer wiring harness, part # 118390 Ball mount, part # 2923 1-7/8 inch trailer ball, part # 19260 or 2 inch trailer ball, part # 63845 If you click the provided...
    view full answer...

  • Hitch and Towing Setup Recommendation for a 2008 Dodge Durango
  • The installation of this Hidden Hitch Trailer Hitch Receiver # 87562 on your 2008 Dodge Durango will be the same as what is shown in the installation videos. I attached one for you to check out as well as installation instructions. Nearly all of the hitches we offer for the 2008 Dodge Durango appear very similar to the # 87562 with the only exception being the Curt Trailer Hitch # 13296. I attached an installation video for this hitch also. To complete your towing setup you may be...
    view full answer...

  • Towing Capacity of 2007 Dodge Durango
  • The bar you are speaking of is capable of towing up to the tow capacity of the vehicle, if the vehicle is correctly equipped. The receiver you referenced, the CURT Class III part # 13072 can handle 6000 lbs, 600 lb TW. When equipped with a weight distribution system, the receiver can handle 9000 lb towing, 900 lb TW. I did some research on the Durango, and found some references listing the towing capacity at 8950 lbs. Some references state that that figure was only for the 5.7 L hemi,...
    view full answer...

  • Will the Hidden Hitch Class III Trailer Hitch fit the Dodge Caravan with Back Up Sensor
  • The Hidden Hitch Class III Trailer Hitch, item # 87719, will fit the 2007 Dodge Grand Caravan with Stow-N-GO seating and a factory backup sensor with no problems. If you have an aftermarket backup sensor then you will have to make that determination, and possibly reposition the sensor to install the hitch.
    view full answer...

  • Capacity and Installation of Curt Class III Receiver # 13072 on 2006 Dodge Durango
  • In order to drill the mounting holes into the cross member at the rear of your Durango, the fasteners holding the rear bumper fascia would be removed so that the fascia can be lifted to allow easier access for the drill. The fascia does not need to be completely removed. The foam fascia reinforcement on top of the cross member will need to be trimmed to allow the U-bolts to pass over the frame member, as shown in the install instructions (see link). The Curt Class III hitch you referenced...
    view full answer...

  • Does Curt Hitch # 13297 Extend Out Past The Bumper on a 2006 Dodge Durango
  • We have six different hitches compatible with your 2006 Dodge Durango, including the Curt # 13297 that you referenced. All of the hitches available for your vehicle do extend out a bit past the bumper/fascia. The diagram shows the Hidden Hitch placement in relation to your bumper/fascia, however, all of the hitches will be extremely similar in placement.The picture is of the Hidden Hitch # 87562 which does give you a length - this picture is taken on the back of a 2009 Chrysler Aspen,...
    view full answer...

  • Trailer Hitch and Wiring Recommendation for a 2006 Dodge Durango
  • You are on the right track. First you will need a trailer hitch for your 2006 Dodge Durango. For that the Curt hitch part # 13072 would be a great option and is also rated for use with weight distribution. For trailer wiring you will need to first start with a 4-way. For that you will want the part # 118390. I attached an install video for you to check out as well. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you...
    view full answer...

  • Towing Capacity of a 2005 Dodge Durango, Not a Hemi
  • According to the owners manual for the 2005 Dodge Durango, the base model tow capacity is 2,000 pounds. But the Ram truck owners manuals say the same thing. You have to go to the Dodge towing website to determine the actual towing capacity. Which is exactly what I did. For the 2005 Dodge Durango: 4 wheel drive Limited, Adventurer, and SLT models with 4.7 liter V8 and 3.55 rear end the capacity is 5,700 pounds. With 3.92 rear end the capacity is 7,200 pounds. 4 wheel drive ST and...
    view full answer...

  • Recommendation of Compatible Hitches for the 2005 dodge Durango and Towing Accessories
  • We have 5 hitches that are designed for use on the 2005 Dodge Durango. I will list them all below. Hidden Hitch Trailer Hitch, item # 87562 Draw-Tite Trailer Hitch, item # 75292 Hidden Hitch Class III Round Tube Trailer Hitch, item # 70751 Draw-Tite Trailer Hitch , item # 75162 Curt Class III Round Tube Trailer Hitch Receiver, item # 13297 Of the five trailer hitches offered I would select the Hidden Hitch Class III Trailer Hitch Receiver, item # 70751, because it has the highest...
    view full answer...

  • Trailer Hitch Availability for a 2005 Dodge Durango Towing a Trailer With a GTW of 6500 lbs
  • The Hidden Hitch Trailer Hitch, # 87562 and the Curt Trailer Hitch, # 13072, are both Class III hitches and are rated up to 6000 lbs. If you add a weight distribution hitch like the Pro Series Weight Distribution System, # PS49903, then the gross trailer weight capacity of the hitch jumps to 9000 lbs and the tongue weight capacity jumps to 900 lbs. You will need to check the towing capacity of your vehicle and keep in mind that the tongue weight will also include anything loaded behind...
    view full answer...

  • Trailer Hitch Recommendation that Will Not Interfere With Spare Tire on a 2005 Dodge Durango
  • I would recommend the Draw-Tite Class III Receiver Hitch, part # 75162 for your vehicle. It has a 2 inch receiver and will not interfere with your spare tire. To wire your vehicle for towing, you will need the T-One Vehicle Wiring Harness, part # 118390. You may also be interested in the following items to complete your towing setup. etrailer.com Ball Mount Kit, item # 989900 Trailer Hitch Receiver Lock, item # 7683
    view full answer...

  • Where are the Torque Specs for the Draw Tite Hitch part # 75162 on a 2004 Dodge Durango
  • I attached a link that contains the installation instructions that has the torque specs for all of the installation hardware for the Draw Tite Hitch part # 75162 on your 2004 Dodge Durango. Using LocTite is not required for the installation hardware of your vehicle, but it would not be a bad idea to use some.
    view full answer...







Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com