view cartView Cart

CALL NOW - 800-298-8924

Product Experts Available Now!

Free Shipping on Orders Over $99

Only 10 Hours 44 Minutes Remaining




Dodge Dart Roof Rack

change vehicle

Select Dodge Dart Year

Roof Rack

Custom fit Roof Rack for your:



Available Years for Roof Rack



Dodge Dart Roof Racks

Roof racks for your Dodge Dart by Thule, Yakima, Rhino Rack and Rola. Easy installation and custom fit designs ensure these racks will allowy you to carry a bike rack, cargo basket, cargo box, ski rack or watersport carrier to your Dodge Dart.

Dodge Dart Roof Racks

Thule, Yakima, Rhino Rack and Rola roof racks are built for an exact fit on your Dodge Dart. Roof rack installation will be easy because of the custom fit designs. These racks will allow you to add a bike rack, cargo basket, cargo box, ski rack or watersport carrier to your Dodge Dart.




What our customers are saying:

Thank you so much. You guys have been wonderful to work with.

Henri

New Orleans, LA


Roof Top Cargo Racks and Carriers

We offer custom fit roof racks from Thule, Yakima and Rola that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.


Roof Rack Accessories



Roof Rack Manufacturers






Dodge Dart Roof Rack Videos

Thule Traverse Roof Rack Installation - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Thule Square Bar Roof Rack System, part numbers thkit1667, th480, and thlb58. Now with our feet, fit kit and load bars already assembled according to the included instructions, we'll begin our test fit by placing the front load bar onto the front of the vehicle. We'll need to measure from the front part of the glass to the first part of the foot on both the passenger and driver side of the vehicle to ensure that the load bar is perpendicular to the vehicle and the fit kit contours to the roof line correctly. After establishing this position, we'll use the included tensioning tools to tighten down the feet to secure the load bar to the vehicle. Note that you may want to tighten down each foot a little at a time so that one side of the load bar doesn't favor one side of the vehicle. We'll now place the load bar onto the rear of the vehicle and we'll need to measure the crossbar spread.



Yakima Q Tower Roof Rack Installation - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Yakima Round Bar Roof Racking System, part numbers y00409, y00124, y00606 and y00702. Now with our Q-clips, towers and crossbars already assembled according to the instructions we'll begin the test fit by placing the front crossbar onto the front of the vehicle. We'll then measure from the front part of the glass to the first part of the tower as indicated in the instructions.We'll measure seven inches on both the passenger and driver's side of the vehicle making sure that the crossbar is perpendicular to the vehicle and the pads on the underside of the Q-towers contour correctly to the vehicle. Once we've established this position on the crossbar we'll then tighten down the silver bolts on the inside of the tower and latch down the black plastic covers.Now you may want to alternate sides when tightening down the silver bolts as when closing the black plastic covers the crossbar will tend to favor to one side. Now with the front crossbar secured to the vehicle we're ready to load our rear crossbar. We'll place our rear crossbar onto the rear of the vehicle and measure the crossbar spread.



Thule AeroBlade Traverse Roof Rack Installation - 2013 Dodge Dart

Today on our 2013 Dodge Dart, we'll be test fitting the Thule Aeroblade roof racking system, part numbers THKIT1667, TH480R, and THARB53. With the feet, fit kit, and aeroblades already assembled according to the included instructions, we'll begin our test fit by placing the front load bar onto the front of the vehicle. We'll then measure from the first part of the glass to the first part of the foot, as indicated in the instructions, 8-1/2". We'll measure this on both the passenger and driver side of the vehicle. This measurement is important to make sure that the aeroblade is perpendicular to the behavior and the pads on the bottom side of the tower contour to the vehicle's rib lines. Once we have established this position onto the vehicle, we'll use Thule's included tensioning tool to tighten down the feet to secure the load bar to the vehicle.





Dodge Dart Roof Bike Racks Videos

Yakima FrontLoader Roof Bike Rack Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Yakima FrontLoader Roof Mounted Wheel Mount Bike Carrier, part number y02103. Now with the Yakima Round Bar Roof Racking System already assembled onto our vehicle we'll begin our test fit by placing the FrontLoader onto the vehicle's crossbars. Well slide the front part of the carrier onto the front crossbar and tighten it down with the T-handle securing the front of the carrier to the front crossbar.We'll then bring the rear bracket around the rear crossbar, insert the T-bolt into the bracket and turn the black wing nut to tighten it down to secure the rear bracket to the rear crossbar. Now with the carrier secured to the vehicle we're ready to load up our bike. We'll unfold the first part of the wheel hook and undo the tray straps.We'll place the bike onto the carrier rolling it forward bringing the back part of the wheel hook onto the rear tire. We'll then tighten down the red knob pinching the wheel hooks together securing the front tire and then we'll move to the rear of the carrier securing the back tire with the tray strap.That completes today's test fit for the Yakima FrontLoader Roof Mounted Wheel Mount Bike Carrier, part number y02103 on our 2013 Dodge Dart.



Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Yakima ForkLift Roof Mounted Bike Carrier, part number y02098. Now with our Yakima Round Bar Roof Rack System already assembled on our vehicle we'll begin our test fit by placing the carrier onto the vehicle's crossbars. In no specific order we'll loosen up the brackets on the front and rear of the carrier to bring around the front and rear crossbar.We'll loosen up the black wing nuts to position the T-bolts into the brackets and tighten them down. Note that depending on the thickness of your vehicle's crossbars you may need to position the brackets accordingly. Once we have the carrier tightened down we can remove the skewer to slide the black plastic cap up behind the black T-handle at the front of the carrier and slide the skewer back through it.Now with the carrier secured to our vehicle we're ready to load our bike. We'll loosen up the skewer and undo the tray strap at the rear.



Thule Domestique Roof Bike Rack Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart well be test fitting the Thule Domestique roof-mounted, fork mount bike carrier, part number TH513. Now, with our vehicle already equipped with the Thule AeroBlade roof racking system well begin our test fit by placing the carrier onto the vehicles loadbars. We will then loosen up the Allen bolts at the head of the carrier. Quick tech tip that in order to access the two front Allen bolts you will first need to remove the skewer. Well then bring the front bracket around the front loadbar as well as loosening up the Allen bolt at the rear of the carrier to bring the rear bracket around the rear loadbar. Well then use the Allen key to tighten the Allen bolts to secure the front of the carrier to the vehicles loadbar.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart well be test fitting the RockyMounts TieRod Stretch roof-mounted bike carrier, part number RKY1011. With our vehicle already equipped with a roof rack system well begin our test fit by placing the carrier onto the vehicles crossbars. We will remove the black plastic cap at the head of the carrier to bring the rubber coated steel straps around the underside of the front crossbar. Well then loosen up the Allen bolts at the rear of the carrier to bring the rear bracket around the underside of the rear crossbar. Well then reinsert them and tighten them down. Well then move back up to the front of the carrier where we will replace the straps in the head of the carrier and tighten down the silver bolt securing the front of the carrier to the front crossbar.



RockyMounts TieRod Roof Bike Rack Review - 2013 Dodge Dart

Today, on our 2013 Dodge Dart, we'll be test-fitting the RockyMounts tie-rod roof-mounted bike carrier, part number RKY1014. Now, with our vehicle already equipped with the roof rack system, we'll begin our test-fit by placing the carrier off of the vehicle's crossbars. We'll remove the black plastic cap at the head of the carrier to bring the rubber-coated steel straps around the underside of the crossbar.We'll then loosen up the Allen bolts at the rear of the carrier to bring the bracket on the rear crossbar. We'll then tighten down and then move back up to the front of the carrier where we will put the straps back into the head of the carrier and, with a wrench, turn the silver bolt to tighten down the straps at the front cross bar.Now, with the carrier secure to the vehicle, were ready to load up our bike. We'll replace the black plastic cap and make sure the skewers loosened up. We'll then loosen up the tray strap, place our bike onto the carrier, slide the forks unto the skewer and secure them, finally securing the back tie with the rear tray strap.



RockyMounts PitchFork Roof Bike Rack Review - 2013 Dodge Dart

Today, on our 2013 Dodge Dart, we'll be test-fitting the RockyMounts Pitchfork, roof-mounted bike carrier, part number RKY0438. Now, with our vehicle already equipped with the two-inch square bar roof rack system, we'll begin our test-fit by placing our carrier onto the vehicles cross bars. We'll remove the black plastic cap at the head of the carrier to allow us to remove the skewer.We'll then loosen up the Allen bolts inside to allow us to bring the bracket around the underside of the crossbar. We'll then thread them back fairly loosely for us to be able to bring the bracket around the rear cross bar at the rear of the carrier. We'll then tighten on the wing nut to secure the rear of the carrier to the rear cross bar and then move back up to the front of the carrier where we will tighten down the Allen bolts, securing the carrier to the vehicle.Now, with the carrier secured to the vehicle, we're ready to load our bike. We'll replace our skewer as well as the black cap.





Dodge Dart Roof Cargo Carrier Videos

Yakima LoadWarrior Roof Cargo Basket Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Yakima Load Warrior Roof Rack Cargo Basket, part number y07070. Now our vehicle is equipped with a Yakima Round Bar Roof Rack System. So to begin our test fit, we'll simply place the roof rack cargo basket onto the vehicles crossbars. Now once the cargo basket is onto the vehicles crossbars we can loosen up the wing nuts to bring the t-bolts around the underside of the black bracket. We'll insert the t-bolt into the black bracket and turn the black wing nut to tighten it down. We'll then repeat these steps for all three of the other brackets.







Dodge Dart Ski and Snowboard Racks Videos

Yakima FatCat Ski and Snowboard Carrier Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Yakima FatCat 6 Locking Rooftop Ski and Snowboard Carrier with a Six Ski or Four Board Capacity, part number y03088. Now our vehicle is equipped with the Yakima Round Bar Roof Racking System so to begin our test fit we'll simply place the front part of the carrier onto the front crossbar. We'll bring the rubber-coated steel straps around the underside of the crossbar and hook them into position.With the jaws of our carrier opened up exposing the black levers we can then tighten down the black lever and clamp it into position securing the strap and preventing it from opening. We'll then repeat these steps for the other bracket on the other side of the vehicle. Now that the first part of the FatCat is secured to our Dodge Dart we're ready to load the rear part of the carrier.We'll place the rear part of the carrier onto the rear crossbar, bring the rubber-coated steel straps around the underside of the crossbar and hook them into position again opening up the jaws exposing the black levers tightening them down and clamping them into position. Now with the FatCat secured to our Dodge Dart we're ready to load up some gear.



Whispbar Roof Ski and Snowboard Carrier Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Whispbar Locking Roof Top Ski and Snowboard Carrier with a Six Ski or Four Board Capacity, part wb-300. Now our vehicle is equipped with the Yakima Round Bar Roof Rack System. To begin our test fit we'll simply place the front part of the carrier onto the front crossbar.We'll bring the rubber-coated steel straps around the underside of the crossbar and hook them back into the top bracket of the carrier. Now with the jaws open exposing the black levers we can tighten them down and clamp them into position preventing the steel strap from coming undone.Now with the front part of the carrier secured to the vehicle we're ready to load the second part of the carrier. We'll place it onto the rear crossbar, bring the rubber-coated steel straps around the underside of the crossbar and with the jaws open exposing the black levers we'll tighten down and clamp them into position. Now with both parts of the carrier secured to the vehicle we're ready to load our gear.We'll push in the oversized buttons at the end of the carrier to open up the jaws.



Thule Flat Top Ski and Snowboard Carrier Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart we'll be test fitting the Thule Flat Top Ski and Snowboard Carrier with a Six Ski or Four Board Capacity, part number th92725. Now with our vehicle equipped with a Thule Aero Blade Roof Rack System we'll begin our test fit by placing the carrier onto the vehicle's front load bar. We'll then bring the rubber-coated steel straps around the underside of the crossbar and hook them into the top bracket of the carrier.We'll then turn the gray knob to tighten them down to secure the carrier to the front load bar. We'll then repeat these steps for the other bracket. Well now set the rear part of the carrier onto the rear load bar. Again, bringing the rubber-coated steel straps around the underside of the crossbar and turning the gray knobs to tighten them down to secure the carrier to the rear load bar.Now with the carrier secured to the vehicle we're ready to load up our gear.





Dodge Dart Watersport Carriers Videos

Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2013 Dodge Dart

Today, on our 2013 Dodge Dart, we'll be test-fitting the Thule SUP taxi stand-up paddleboard carrier with a two-board capacity, part number TH810. Now, with the Thule Airwave roof rack system already assembled on our vehicle, we'll begin our test-fit by placing the front part of the carrier onto the front load bar. We'll bring the rubber-coated steel straps around the underside of the cross bar and hook them back into the top bracket.We'll then turn the gray knob to tighten on the straps and secure the carrier to the front low bar. We'll then repeat the steps for the other side of the vehicle. We'll now place the rear part of the carrier unto the rear load bar and again bring the rubber-coated steel straps around the other side of the crossbar and put them back into the top bracket. We'll then turn the gray knobs to secure the carrier to the vehicle.Once again we'll repeat these steps for the other side of the vehicle.





Dodge Dart Roof Rack Questions and Answers


  • Thule AeroBlade Roof Rack Load Bar in Black for a 2014 Dodge Dart
  • Absolutely! The Thule AeroBlade load bar # THARB53B is the one that you want (in black). This is compatible with your 2013 and/or 2014 Dodge Dart. You will also need parts # TH480R foot pack and fit kit # THKIT1667 which is compatible for a 2013 and/or 2014 Dodge Dart. I have included an installation video as well.
    view full answer...

  • Will Yakima 48-Inch Roof Rack Crossbars Fit the 2013 Dodge Dart
  • The Yakima roof rack components that you referenced, parts # Y00409, # Y00702, # Y00606 and # Y00124, make up a complete rack system that fits the naked roof on your 2013 Dodge Dart. The crossbars in this system, part # Y00409, are 58-inches in length. Installation of this system on your vehicle is shown in the linked video. Crossbars that are 48-inches will not be long enough for your vehicle. The shortest crossbars that will work on your Dart are the 53-inch size that are part of the...
    view full answer...










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email





Free Shipping on Orders Over $99

Only 10 Hours 44 Minutes Remaining


etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com