Dodge Trailer Wiring Harness
Make installing a trailer wiring harness on your Dodge as easy as possible with a custom fit wiring harness from Draw-Tite, Curt, Pollak, Tow Ready or Hopkins. A custom kit will eliminate or reduce the need to cut and splice wires in your Dodge while helping to protect sensitive electronics.
What our customers are saying:
Good products, fast shipping
Trailer Wiring Harness Installation - 2006 Dodge Charger
Today on this 2006 Dodge Charger, we will be installing wiring harness part number 118404. We are in the trunk area of the Charger here and we want to go ahead and locate the port for our wiring harness. The ports are located directly behind the tail light assemblies here inside the trunk compartment. So we need to go ahead and remove the interior carpeting here to gain access to those. To do that we just need to remove the screw here on both sides of the vehicle and we just pull that back. You see once we do that, right in the back of the tail light assembly is our connection point. As you see there is a red tab here at the top. We want to push that over and then there is also a button here at the top we push that in and disconnect the two like so. 00:41
Trailer Wiring Harness Installation - 2007 Dodge Charger
Along with your custom receiver hitch for the Dodge Charger you will also need a wiring connector when pulling a trailer. We offer a custom wiring harness that requires no cutting or splicing and will provide a flat four pole connector. This will power the trailers running lights, brake lights and turn signals allowing you to safely and legally tow your toys, boat and trailer. You may also want this to power lights on a cargo trailer or to use a light up receiver hitch cover.