Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Chrysler. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Chrysler on the road.
What our customers are saying:
The hitch arrived by fedex much sooner than I expected. It installed with 5 bolts in less than 30 minutes, working alone. Very easy.
Randall
Greenfield, IN
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
Hitch Accessories
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 2013 Chrysler Town and Country - Hidden Hitch
Today on this 2013 Chrysler Town and Country were going to install part number 87451 from Hidden Hitch. This is what the hitch looks like once its installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 13 inches. From the center of the hitch pin hole to the edge of the bumper will be about six and a quarter inches. Now well go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2013 Chrysler Town and Country - Draw-Tite
Today on this 2013 Chrysler Town and Country, were going to install part number 75579 from Draw Tite. All right this is what the hitch looks like once its installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 13-1/4 From the center of the hitch pin hole to the edge of the bumper will be about 6-1/4.Now well go ahead and show you how the hitch is installed. The first step is to go ahead and lower the exhaust. Right behind the muffler is a hanger well unbolt and one above the axial that well unbolt as well.
Today on this 2013 Chrysler Town and Country, were going to install part number 36455 from Draw Tite. This is what the hitch looks like once its installed on the vehicle. Next well give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 13-1/4 and from the center of the hitch pin hole to the outside edge of the bumper will be about 6-3/4. Now well go ahead and show you how the hitch is installed. First thing we need to do before we do our install is to go ahead and lower the exhaust out of the way.
Trailer Hitch Installation - 2007 Chrysler Town and Country - Curt
Today on our 2007 Chrysler Town and Country, well be installing Curt Hitch part number 13389. Now before we begin our installation heres what your hitch will look like on the vehicle. Well go ahead and give you a few measurements to assist you in selecting accessories such as a drawbar, a bike rack, or a cargo carrier. From the top of the receiver tube to the ground measures 12 and from the center of the hitch pin hole to the outer most part of the bumper measures four inches. With that well go ahead and start our installation. To begin our installation, well need to locate the attachment points on the vehicle frame.
Trailer Hitch Installation - 2007 Chrysler Town and Country - Hidden Hitch
Today on our 2007 Chrysler Town and Country, well be installing Hidden Hitch, part number 87719. Now before we begin our install, heres what your hitch will look like on the vehicle. At this point well go ahead and give you a few measurements to help assist you when selecting accessories such as a drawbar, a bike rack or a cargo carrier. From the top of the receiver tube to the ground measures 12 inches and from the center of the 5/8 inch hitch pinhole to the outermost part of the bumper measures 2 inches. Now lets go ahead with our install. Now to begin our installation well need to locate the three attachment points on either side of the frame. Well be using for our rear two attachment points, the two bolts here on the leaf spring shackle.
Trailer Hitch Installation - 2007 Chrysler Town and Country - Draw-Tite
Today on our 2007 Chrysler Town and Country, well be installing Draw-Tite Hitch, part number 75305. Now before we begin our install, heres what your hitch will look like on the vehicle. At this point well go ahead and give you a few measurements to help assist you when selecting accessories such as a drawbar, a bike rack or a cargo carrier. From the top of the receiver tube to the ground measures 12 inches and from the center of the 5/8 inch hitch pinhole to the outermost part of the bumper measures 2 inches. Now lets go ahead with our install. Now to being our installing, well need to locate the three attachment points on either side of the frame.
Trailer Hitch Installation - 2002 Chrysler Town and Country - Hidden Hitch
Today on this 2002 Chrysler Town and Country were going to install part number 90165 from Hidden Hitch. This is what the hitch looks like once its installed on the vehicle. Next well give you some measurements to help you out in selecting some accessories such as a cargo carrier or a bicycle rack. From the top of the receiver opening down to the ground will be about 13 inches, and from the center of the hitch pin hole to the edge of the bumper will be about four and three quarter inches. Now Ill go ahead and show you how the hitch is installed. The first thing we need to do is get underneath the vehicle and we need to remove the front bumper bolts.
Trailer Hitch Installation - 2002 Chrysler Town and Country - Draw-Tite
Today on this 2002 Chrysler Town and Country were going to install part number 24702 from Draw Tite. This is what the hitch looks like once its installed on the vehicle. Next well give you some measurements to help you out in selecting some accessories such as a cargo carrier or a bicycle rack. From the top of the receiver opening down to the ground will be 12 inches. From the center of the hitch pin hole to the edge of the bumper will about four inches. Now Ill go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2010 Chrysler Town and Country - Draw-Tite
Today on our 2010 Chrysler Town and Country were going to install part number 36455 from Draw Tite. This is what the hitch looks like when its installed on the van. Next well give you some measurements that will help you out in selecting some accessories, such as a bike rack or a cargo carrier. From the top of the receiver opening down tot eh ground will be about 12 inches. From the center of the hitch pin hole to the edge of the bumper will be about six and three-quarter inches. Now well go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2013 Chrysler Town and Country - Curt
Today on our 2013 Chrysler Town and Country well be installing Curt hitch part number 13364. Well go ahead and give you a few measurements to help you with selecting accessories such as a draw bar, bike rack, or a cargo carrier. From the center of the hitch pin hole to the outer most part of the bumper is four inches. From the top of the receiver tube to the ground is 12 and a quarter inches. Now to begin our installation well need to lower the exhaust. Well remove the bolts holding the exhaust and muffler hangers.
Trailer Hitch Installation - 2009 Chrysler Town and Country - Curt
Trailer Hitch Installation - 2011 Chrysler Town and Country - Draw-Tite
Trailer Hitch Installation - 2011 Chrysler Town and Country - Hidden Hitch
Today on this 2011 Chrysler Town and Country, were going to install part number 87451 from Hidden Hitch. This is what the hitch looks like once installed on the van. Next, well give you some measurements to help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the edge of the bumper its going to be six and a quarter inches. From the top of the receiver opening down to the ground will be 12 and half inches. Now Ill go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2011 Chrysler Town and Country - Curt
Today on this 2011 Chrysler Town and Country, were going to install part number 13364 from Curt. This is what the hitch looks like once installed on the van. Next, well give you some measurements to help you out in selecting some accessories such as the ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin opening to the edge of the bumper is going to be four and a quarter inches. From the top of the receiver opening down to the ground will be 12 and half inches. Now Ill go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2001 Chrysler Town and Country - Hidden Hitch
Today on our 2001 Chrysler Town and Country well be installing Hidden Hitch part number 87717. This is what our hitch will look like once its installed. Next, well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 4 inches. From the top of the receiver tube to the ground is 11-1/4 inches. This will assist you with selecting accessories such as a draw bar, a bike rack or a cargo carrier.
Today on our 2011 Chrysler Town and Country well be installing Hidden Hitch part number 90169. To being our installation, well need to lower the exhaust by removing the bolt which attaches the rearmost hanger to the passenger side frame rail. Well also going to go ahead and remove the bolt holding the hanger just forward of the rear axle. This is just so we can drop the exhaust a little farther to be able to see. Next, here on the driver side, were going to remove the existing bolts from the frame rails. Now these are the locations that well be mounting the hitch so well need to retain the fasteners as well be reusing them to mount the hitch.
Today on our 2011 Chrysler Town and Country well be installing Draw-Tite Hitch part number 36455. To being our installation, well need to lower the exhaust by removing the bolt which attaches the rearmost hanger to the passenger side frame rail. Well also going to go ahead and remove the bolt holding the hanger just forward of the rear axle. This is just so we can drop the exhaust a little farther to be able to see. Next, here on the driver side, were going to remove the existing bolts from the frame rails. Now these are the locations that well be mounting the hitch so well need to retain the fasteners as well be reusing them to mount the hitch.
Trailer Hitch Installation - 2005 Chrysler Town and Country - Hidden Hitch
Today on our 2005 Chrysler Town and Country well be installing Hidden Hitch part number 87719. This is what our hitch will look like once its installed. Now, we can go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 3 inches. From the top of the receiver tube to the ground is 12-1/4 inches. This will assist you with selecting accessories such as a drawbar, a bike rack or a cargo carrier.
Trailer Hitch Installation - 2005 Chrysler Town and Country - Draw-Tite
Today on our 2005 Chrysler Town and Country well be installing the Draw-Tite hitch part number 75305. This is what our hitch will look like once its installed. Now, we can go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 3 inches, from the top of the receiver tube to the ground is 12-1/4 inches. This will assist you in selecting accessories such as drawbar, a bike rack, or a cargo carrier. Now, lets go ahead with installation.
