Trailer Hitches for Chevrolet
Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Bosal to fit your Chevrolet. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Chevrolet on the road.
What our customers are saying:
I havent even received my Hitch and wiring kit yet and Im already incredibly impressed with the customer service. When my hitch that I selected was back ordered I didnt get a cookie-cutter email, I got a phone call, by a real-live person, in under 12 hours! They explained my options, and had a different manufacturers item in its place shipped out same-day. Not only will I buy from again, Im telling everyone I know who wants a hitch who to use.
Mitchell
McGuire Afb, NJ
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Valley, and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
Trailer Hitch Installation - 2012 Chevrolet Colorado - Hidden Hitch
Today on our 2012 Chevrolet Colorado were going to install part number 87458 from Hidden Hitch. This is what the hitch looks like when its installed on the vehicle. Next well go ahead and give you some measurements that will help you out in selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be 14 inches, and from the center of the hitch pin hole to the edge of the bumper will be four and a quarter inches. Now Ill go ahead and show you how the hitch is installed. To start off our install we have to remove two bolts from the side of the frame.
Trailer Hitch Installation - 2012 Chevrolet Colorado - Draw-Tite
Today on this 2012 Chevrolet Colorado were going to install part number 75607 from Draw-Tite. This is what the hitch looks like once its installed on the vehicle. Next well go ahead and give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be 14 inches. From the center of the hitch pin hole tot eh edge of the bumper will be 4 inches. Now Ill go ahead and show you how the hitch is installed.
Trailer Hitch Installation - 2008 Chevrolet Colorado
Today we are going to be installing hitch part number 87458 from Hidden Hitch on a 2008 Chevrolet Colorado. OK, we are underneath the vehicle, and the first thing we want to do is go ahead and remove the spare tire to give you a little more working room to get the hitch up into place. Looking at the passengers side frame rail, we are going to go ahead and point out the mounting locations for the hitch. At the bottom of the frame, there is an existing hole here that is going to be used for the bottom of the frame mounting location. And on the side of the frame we have got two bolts that are existing. So the first thing we want to do is to go ahead and remove these bolts from both sides of the frame.
Trailer Hitch Installation - 2008 Chevrolet Colorado
Today we are going to install hitch part number 82641 on a 2008 Chevy Colorado, and this hitch also fits models from 2004 through 2007, as well as 2004 through 2008 GMC Canyon. On the side of the frame we need to remove this rear-most bolt that attaches the bumper and bracket to the frame. And on the bottom, on pre-2008 models there are actually going to be two logistic holes here. On this 2008 model, there is actually a weld nut with a bolt into here, which we are actually going to take out, and we will be using this hole as well. We need to do that on both sides of the frame.
