CALL NOW - 800-298-8924
Product Experts Available Now!
Free Shipping on Orders Over $99
Custom fit Trailer Hitch for your:
Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Torklift to fit your Chevrolet Cavalier. Choose the hitch that is right for your towing needs and your budget.
All hitches come with a limited lifetime warranty and are manufactured in the USA.
We offer over a custom hitch for virtually every Chevrolet Cavalier on the road.
What our customers are saying:
hitch arrived on time, and it took me about 10 min to put it on . thanks alex
Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.
More Trailer Hitches
Trailer Hitch Manufacturers
Trailer Hitch Installation - 2005 Chevrolet Cavalier - Draw-Tite
Today on our 2005 Chevy Cavalier, we will be installing the Draw-Tite Trailer Hitch, part number 24613. Heres what the hitch looks like installed on your vehicle. Well go ahead and give you a couple measurements in helping you select a few accessories for your hitch such ball mount, bike rack, or cargo carrier. From the center of the hitch pinhole to the edge of the bumper is approximately 8 inches, and from the top of the hitch opening to the ground is approximately 10-1/2 inches. Now, were ready to go ahead and install our hitch. Well begin by removing the exhaust bracket that goes around the muffler.Next, we will move a little farther forward and locate the next exhaust hanger.
Trailer Hitch Installation - 2001 Chevrolet Cavalier - Draw-Tite
Today, on our 2001 Chevy Cavalier, we'll be installing the Draw-Tite Hitch Part Number 24733.This is what our hitch to look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 5-3/4 inches. From the top of the inside of the receiver tube opening to the ground is 11-3/4 inches. This will assist you in selecting accessories such as a bike rack or a cargo carrier. Now, let's go ahead with installation.
Trailer Hitch Installation - 2003 Chevrolet Cavalier - Curt
Today on our 2003 Chevy Cavalier, we'll be installing the Curt Hitch, part number 11109. This is what our hitch will look like once it's in position. Next, we'll go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outer most edge of the bumper is 7 inches. From the top of the receiver tube to the ground is 13 inches. This will assist you with selecting accessories such as a drawbar, a bike rack, or a cargo carrier.
Today, in this 2005 Chevy Cavalier were going to install part number 24733 from Draw-Tite. This is what our hitch looks like when its installed on the vehicle. Next, well give you some measurements thatll help you out in selecting some accessories such as a cargo carrier or a bicycle rack. From the top of the receiver tube to the ground measures 12-1/2 inches, and from the center of the hitch pinhole to outside edge of the bumper is 6-3/4 inches. Now Ill go ahead and show you how the hitch is installed. Well start off our install by loosening up two bolts at the very end of the frame.
Trailer Hitch Installation - 2004 Chevrolet Cavalier
Alright, today, on this 2004 Chevrolet Cavalier, were gonna install part number 24613 from Draw Tite.Alright, this what the hitch looks like once its installed in the car. Next, were gonna give you some measurements help you out in selecting some accessories. From the top of the receiver opening down to the ground is going to be 11 inches. And from the center of the hitch pinhole to the outside edge of the bumper is going to be 11 inches. Now Ill go ahead show you how the hitch is installed.First thing we need to do is go ahead and lower the exhaust to have some workroom. This clamp around the exhaust here, which is bolted on either side that we have to remove and well spray it down with some lubricant to make it a little easier to undo.
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com